Why did the Edge's alert sound suddenly change?

What is the difference between Vellfire and Alphard?

The differences between Vellfire and Alphard are: 1. Different dimensions: The length, width, and height of the Vellfire are 4975mm, 1850mm, and 1945mm respectively, with a wheelbase of 3000mm; the length, width, and height of the Alphard are 4975mm, 1850mm, and 1890mm respectively, with a wheelbase of 3000mm. 2. Different top speeds: The top speed of the Vellfire is 152 km/h; the top speed of the Alphard is 180 km/h. 3. Different fuel tank capacities: The fuel tank capacity of the Vellfire is 58L; the fuel tank capacity of the Alphard is 75L.

110

Share

How to Adjust the Time on a Chevrolet Cruze?

To adjust the time on a Chevrolet Cruze, follow these steps: 1. Press the one-touch start button in the vehicle's center console to power up the instrument panel; 2. Press the 'set' button on the left side of the steering wheel; 3. Use the up and down option toggle buttons on the right side of the steering wheel to adjust the vehicle time; 4. Press the 'OK' button on the steering wheel to confirm the changes. The Chevrolet Cruze is a compact sedan equipped with a 1.5L naturally aspirated engine, delivering a maximum horsepower of 114 HP and a peak torque of 146 Nm. The vehicle measures 4666mm in length, 1807mm in width, and 1460mm in height, with a wheelbase of 2700mm. It comes with a 6-speed manual transmission and has a top speed of 185 km/h.

104

Share

How to Get Through the Break-in Period of a New Car?

Methods to get through the break-in period of a new car are: 1. During cold starts, wait until the coolant temperature reaches above 40°C before moving off. Start gently by slowly releasing the clutch and accelerator pedal, and choose good road conditions for driving; 2. For a car in the break-in period, it is essential to control the driving speed—avoid excessive speed, ideally keeping it between 50 to 80 km/h; 3. Avoid using a single gear for extended periods. Start in a low gear and gradually shift to higher gears, driving progressively; 4. When braking during the break-in period, first press the clutch pedal to disengage the gear before applying the brake pedal. This reduces impact damage to the new car's engine, braking system, and chassis.

120

Share

What are the steps for starting the car in Subject 2 of the driving test?

The steps for starting the car in Subject 2 of the driving test are: 1. After getting into the car, before starting, you need to adjust the seat and rearview mirrors. The standard for the rearview mirrors is to be able to see the door handles on both sides through them. Make sure to fasten the seat belt—forgetting to do so will result in an immediate deduction of 100 points. 2. Before starting, check if the gear shift lever is in the neutral position. 3. Start the ignition with both the clutch and brake fully depressed. 4. Engage first gear, turn on the left turn signal, and release the handbrake. 5. If on flat ground, you can fully release the brake first, then gradually release the clutch to the semi-engaged state while gently pressing the accelerator pedal to start. If on a slope, maintain pressure on both the brake and clutch to avoid stalling.

106

Share

Does Maintenance Outside Affect Warranty?

Maintenance outside does not affect the warranty. However, there is a prerequisite: the repair shop you visit must have a Class II or higher qualification, and you must keep the maintenance list and invoice for each repair or maintenance. In this way, even if there is a problem, the 4S shop still has to honor the warranty. The following are expanded details from the Automobile Three Guarantees Law: 1. "Regulations on the Repair, Replacement, and Return of Household Automobile Products": According to Article 12, Chapter 3 of the "Regulations on the Repair, Replacement, and Return of Household Automobile Products" (Order No. 150 of the General Administration of Quality Supervision, Inspection and Quarantine), sellers of household automobile products must comply with the following requirements: clearly indicate the name, address, and contact information of the repairer agreed upon by the manufacturer, but consumers have the right to independently choose a repairer from the listed repairers, and sellers cannot restrict this choice. 2. "Consumer Rights Protection Law": According to Article 9, Chapter 2 of the "Consumer Rights Protection Law", consumers have the right to independently choose goods or services. This means that car owners have the right to compare, evaluate, and select, and independently choose a repairer that suits them during maintenance and repairs. 3. "Guidance on Promoting the Transformation and Upgrading of the Automobile Repair Industry and Improving Service Quality": Automobile manufacturers and their authorized sales and repair enterprises must not abuse automobile warranty clauses. As long as consumers use, maintain, and repair automobile products correctly according to the user manual, manufacturers cannot refuse the "Three Guarantees" policy on the grounds that the owner has performed maintenance at an external repair shop.

119

Share

Can Insurance Be Refunded After a Total Loss of the Vehicle?

Yes, it can be refunded. Compulsory traffic insurance (CTI) can be canceled under the following three circumstances: the insured vehicle has been deregistered; the insured vehicle has been officially declared out of service; or the insured vehicle has been confirmed as lost. The required materials for canceling the insurance are as follows: 1. Cancellation application: State the reason and time for cancellation, with the owner's signature for private vehicles or the company's official seal for corporate vehicles. 2. Insurance policy: The original policy; if lost, it must be reissued beforehand. 3. Insurance premium invoice: Generally, the original is required. 4. The insured's original ID: Business license for corporate vehicles or ID card for private vehicles.

112

Share