···
Log in / Register

Does the reversing into the garage in Driving License Subject 2 require reversing twice?

6Answers
AniyahFitz
07/29/2025, 01:55:55 PM

For the reversing into the garage in Driving License Subject 2, you need to perform left-side reversing and right-side reversing once each. Below is the relevant introduction: 1. Driving License: The full name of the driving license is the motor vehicle driving license, also known as the "driver's license". It is the certificate required by law for motor vehicle drivers. Driving a motor vehicle requires certain driving skills. People lacking these skills may cause traffic accidents if they drive recklessly. Generally, individuals cannot drive on the road without a license. 2. Subject 2: Subject 2, also known as the small road test, is part of the motor vehicle driving license assessment. It is the abbreviation for the field driving skill test. For small vehicles C1 and C2, the test items include five mandatory tests: reversing into the garage, parallel parking, stopping and starting on a slope, turning at a right angle, and driving through curves (commonly known as the S-curve).

Was this review help?
112
Share
DelPaige
08/14/2025, 05:49:02 AM

When I was learning to drive, practicing reverse parking was really tough. I had to go back and forth in the training area every day. The instructor clearly required us to complete two reverse parking maneuvers—first from the right side, then after adjusting the direction upon exiting, we had to reverse again from the left side. The exam rules were explicit: missing one attempt would result in an automatic failure. I remember one time when I tried to cut corners by only reversing from the right side, and the instructor immediately stopped me, saying that practicing like that was useless and I would never pass the actual test. Later, I spent days focusing on the reference points in the rearview mirror, practicing both left and right reverse parking seven or eight times each until I got the hang of it. After all, in real driving situations, you encounter parking spaces at different angles, so mastering bidirectional reverse parking is essential. During the exam, I strictly performed both reverse parking maneuvers and only relaxed when I heard the announcement that I had passed.

Was this review help?
3
Share
Expand All
Candice
10/13/2025, 11:08:39 PM

Last week, I took my son to practice Subject 2 of the driving test, and it's true that parking in reverse requires two attempts. The first time, align the right rear wheel of the car with the corner of the parking space and reverse to the right, then stop and turn left to exit the space. Next, straighten the car and reverse left into the same space. It wasn't until the fifth day of practice that my son understood: if only a single-side reverse parking is completed, the exam system will judge the operation as incomplete. In real life, parking space directions vary, so this design is quite reasonable. During practice, I had him focus more on left-side reverse parking because operating the steering wheel in the opposite direction can easily lead to confusion. I recommend remembering three key points: maintain a distance of 1.5 meters from the side line before entering the space, turn the steering wheel fully when the rearview mirror obscures the corner line of the space, and finally use the left rearview mirror to fine-tune the car's position.

Was this review help?
18
Share
Expand All
StColeman
11/26/2025, 11:02:32 PM

Having taught Subject 2 for eight years, the key assessment point for reverse parking is two complete reversing maneuvers. Students must first perform a right-side reverse: turn the steering wheel fully to the right to reverse in, then turn left to exit and stop at the designated position. Next, turn the steering wheel fully to the left to reverse back into the same parking space. The electronic monitoring system records both reversing actions—missing one results in an immediate 100-point deduction. During practice, it's advisable to use tape to mark reference points on the car windows, such as turning the wheel when the corner line disappears from the rearview mirror. A common mistake is forgetting to straighten the wheel during left-side reversing, causing the left boundary line to be crossed. In fact, keeping the speed below 3 km/h by controlling the clutch significantly improves success rates.

Was this review help?
6
Share
Expand All
TimothyLynn
01/17/2026, 12:29:56 AM

Last year when preparing for the driver's license test, I practiced reversing into the garage for two hours daily. The instructor emphasized that two complete reversing operations were required to pass. The first step was reversing from the right side into Garage A – simply stopping the car inside wasn't enough. Then I had to turn left to exit to point B, before completing a left-side reverse into the same Garage A. I found left-side reversing more challenging because the steering wheel direction was opposite to normal habits. The instructor taught me to align the wiper's raised point with the boundary line to control distance, and to turn the wheel immediately when seeing the outer corner of the garage in the rearview mirror. After persistently practicing for three days, I finally managed to reverse from both sides without crossing lines. On exam day, the safety officer specifically verified whether both operations were completed – otherwise the result would be invalid.

Was this review help?
17
Share
Expand All
SanLouis
04/13/2026, 02:28:41 AM

The most nerve-wracking part of the Subject 2 driving test is the reverse parking section, which explicitly requires completing both left and right reverse parking maneuvers. First, the right reverse parking: turn the steering wheel fully to the right and reverse, straighten the wheels once the rear wheels enter the parking space; then drive out to the left and stop once the front wheels cross the sensor line; next, turn the steering wheel fully to the left and reverse for the second parking. I remember my cousin failed the test because she forgot the left reverse parking and had to retake it. During actual practice, three key points should be noted: it's better to turn the steering wheel early rather than late, the speed must be kept sufficiently slow, and the car body must be parallel to the side line when adjusting while exiting. Although I can now park with ease, the pain of practicing twenty left and right reverse parkings each day back then is truly unforgettable.

Was this review help?
2
Share
Expand All
More Q&A

How to Use the Automatic Transmission of Audi A6?

Audi A6 automatic transmission usage method is: 1. Press the brake pedal and push the one-touch start button to start the engine; 2. Shift the gear to D position, release the handbrake, and then release the brake pedal. Taking the 2021 manual Fengyue version Audi A6 as an example, its body dimensions are: length 5038mm, width 1886mm, height 1475mm, wheelbase 3024mm, fuel tank capacity 73l, and trunk capacity 430l. The 2021 manual Fengyue version Audi A6 is equipped with a five-link independent suspension in the front and rear, and powered by a 2.0T turbocharged engine with a maximum horsepower of 190PS, maximum power of 140kW, and maximum torque of 320Nm.
102
Share

How to Use the Car's Internal Air Recirculation?

The method to use the car's internal air recirculation is: press the corresponding button to switch the air conditioning mode to internal circulation. The differences between internal and external air circulation in a car: 1. The method of air circulation is different: external circulation draws air from outside the car, which is then cooled or heated by the air conditioning system before being blown out through the vents; internal circulation draws air from inside the car. 2. The symbols on the car's air conditioning panel are different: the symbol for external circulation is from outside to inside; the indicator for internal circulation is an arrow pointing inward. 3. The functions are different: external circulation brings fresh air from outside into the car to maintain air quality inside; internal circulation effectively prevents external dust and harmful gases from entering the car, and can enhance the cooling and heating effects of the air conditioning system.
103
Share

What are the symptoms of a faulty thermostat in the Excelle?

The symptoms of a faulty thermostat in the Excelle are: the car heats up quickly, and the air conditioning does not cool. The thermostat is a valve that controls the flow path of the coolant, serving as an automatic temperature-regulating device. Its function is to automatically adjust the amount of water entering the radiator based on the coolant temperature, change the circulation range of the water, regulate the cooling system's heat dissipation capacity, and ensure the engine operates within an appropriate temperature range. The Excelle is a 4-door, 5-seater compact sedan with body dimensions of 4468mm in length, 1765mm in width, and 1469mm in height, with a wheelbase of 2611mm. It is equipped with a 1.3L naturally aspirated engine paired with a 5-speed manual transmission.
108
Share

What are the differences between the Lexus NX and RX?

The differences between the Lexus NX and RX are as follows: 1. Different vehicle positioning: The Lexus NX is a mid-size SUV; the Lexus RX is a mid-to-large-size SUV. 2. Different body dimensions: The Lexus NX has a length, width, and height of 4640mm, 1845mm, and 1645mm respectively; the Lexus RX has a length, width, and height of 4890mm, 1895mm, and 1690mm respectively. 3. Different powertrains: The Lexus NX uses a 2.0L naturally aspirated engine, a 2.5L hybrid system, and a 2.0L turbocharged engine; the Lexus RX uses a 2.0L turbocharged engine and a 3.5L hybrid system.
107
Share

What are the items included in a car's first maintenance?

Car's first maintenance includes: 1. Changing engine oil and oil filter, cleaning air filter, checking whether the generator belt and wiper blades are damaged; 2. Checking whether the levels of various fluids are normal; 3. Checking whether the tire pressure is normal, and whether there is uneven wear, bulging, or damage on the tires; 4. Inspecting the car chassis, including brake pads, brake discs, connecting rods, ball joints, and CV joints for any scratches; 5. Checking whether all switches and lights in the car are working properly. Precautions before the first maintenance are: 1. Make an appointment in advance; 2. Bring necessary items, such as the maintenance manual and vehicle license; 3. Record any faults or questions encountered during daily driving and inform the staff during the first maintenance registration.
104
Share

How to Shift Gears in the Lynk & Co 02?

The method to shift gears in the Lynk & Co 02 is: 1. Press the one-touch start button to ignite the engine and shift to R (Reverse) or D (Drive) gear; 2. When the vehicle is in P (Park) gear, push the gear lever twice to shift to D (Drive) gear. The Lynk & Co 02 is a compact 5-door, 5-seater SUV with body dimensions of 4448mm in length, 1890mm in width, and 1528mm in height, with a wheelbase of 2702mm. It is equipped with a 1.5T turbocharged engine and a 6-speed manual transmission, delivering a maximum power of 115 kW and a maximum torque of 245 Nm. The drivetrain is front-wheel drive, with a MacPherson strut independent front suspension and a torsion beam non-independent rear suspension.
113
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.