How do I install the support handle and guard on my MEEC TOOLS 019478 Angle Grinder?

[ColemanFitz]

Installing the support handle and guard on your MEEC TOOLS 019478 Angle Grinder is essential for safe operation. Here's how:

For the Support Handle:

1. Always unplug the angle grinder before any assembly or disassembly.
2. Choose to attach the handle on either the left or right side of the grinder, based on your preference and the task.
3. Align the holes on the support handle with the corresponding holes located on the grinder's body.
4. Insert the provided screws through the holes and securely tighten them using a screwdriver. Ensure the handle is firmly attached.

For the Guard:

1. Begin by removing the flanges (outer flange and disc support plate) from the grinder.
2. Use a screwdriver to loosen and remove the screws that secure the pressure plate.
3. Carefully remove the pressure plate from the grinding head.
4. Position the guard onto the grinding head, making sure that the open part of the disc is oriented away from your hand for maximum protection.
5. Line up the mounting holes on the guard with the holes on the grinding head.
6. Insert the screws through the holes and tighten them firmly with a screwdriver.
7. Double-check that the guard is securely attached and does not move easily. A properly fitted guard is crucial for your safety. For visual aids and additional safety information, always consult the MEEC TOOLS 019478 Angle Grinder instruction manual.