How to install the ZEVNI A04674 Corney 13 Inch Wide Vanity Light step-by-step

[VonNaomi]

Installing the ZEVNI A04674 Corney 13 Inch Wide Vanity Light is straightforward when following these steps. First, ensure safety by turning off the power at your home's circuit breaker. Next, assemble the fixture by removing the provided nuts from the back plate and setting them aside, then attaching the lower tubes to the bottom of the sockets. Now, install the mounting plate, feeding the supply wires from your outlet box through it and securing it to the box using the screws provided. For wiring, connect the wires according to the wiring diagram; remember to connect the ground wire (bare copper) only to the ground. Use plastic wire connectors to twist the wires together, then wrap each connector with electrical tape, ensuring no wire strands are exposed. After wiring, attach the back plate by aligning its holes with the pre-assembled mounting screws and securing it with the nuts you set aside, tightening by hand until snug. Carefully place the glass shades onto the sockets and secure them with the screws included. Then, install light bulbs (not included) that match the recommended maximum wattage on the socket. Finally, double-check all connections before restoring power to enjoy your new ZEVNI vanity light. For detailed visuals and additional information, always consult the ZEVNI A04674 Corney 13 Inch Wide Vanity Light's instruction manual.