Installing the ZEVNI A04687 Berton 38 Inch Wide Black Kitchen Island Light is straightforward when following these steps. Always prioritize safety by turning off the power at your home's circuit breaker before you begin.
Pre-Installation:
- Determine your desired fixture height and select the appropriate stems (I).
- Thread the fixture wires through one side of the stems (I) and then attach the chosen stems to the top of the arm (J).
- Connect the quick links (H) to the loops (F) located on both the canopy (E) and the top of the stems (I).
- Pass the fixture wires through the loops (F) and the canopy (E).
Installation Steps:
- Unscrew the nuts (G) from the mounting plate (C).
- Affix the mounting plate (C) to your outlet box using the mounting screws (B).
- Adjust the length of the fixture wires above the mounting plate if needed, ensuring at least 6 inches of wire is available.
- Make the necessary wire connections, adhering to the wiring diagram provided in the ZEVNI A04687 Berton manual. Be certain to properly connect the ground wire.
- Secure the canopy (E) to the ceiling by tightening the nuts (G) onto the pre-assembled screws on the mounting plate (C).
- Carefully place the glass shades (M) onto the sockets (K) and secure them with the screws (L).
- Install light bulbs (not included) into the sockets, ensuring you use bulbs that match the recommended wattage specified.
Final Checks:
- Double-check that all components are securely installed.
- Restore power at the circuit breaker.
- Turn on your new ZEVNI A04687 Berton kitchen island light and enjoy!
If you encounter any challenges or have further questions during the installation process, consulting a qualified electrician is always recommended to ensure a safe and successful outcome.
