···
Log in / Register

Where is the cabin air filter located in the Veyron V7?

6Answers
DiElliot
07/28/2025, 10:57:33 PM

The cabin air filter in the Veyron V7 is located inside the glove compartment on the passenger side. The functions of the cabin air filter include: 1. Ensuring the filter fits tightly against the housing to prevent unfiltered air from entering the cabin; 2. Separating solid impurities such as dust, pollen, and grinding particles from the air; 3. Preventing car windows from fogging up and ensuring clear visibility for the driver and passengers. The Veyron V7 measures 4530mm in length, 1745mm in width, and 1498mm in height, with a wheelbase of 2610mm. It is equipped with a 5-speed manual transmission and has a fuel tank capacity of 45L. The engine delivers a maximum horsepower of 124, and the vehicle features front-wheel drive with tire specifications of 195/55R15.

Was this review help?
104
Share
Roman
08/12/2025, 09:12:42 AM

I remember the first time I helped my cousin replace the air filter for his Changan Alsvin V7, located behind the glove compartment on the passenger side. After opening the glove box, press firmly on both clips to remove the entire storage compartment. Behind it, you’ll find a rectangular plastic cover—unscrew the two bolts and lift it to reveal the white filter inside. Pay special attention to the arrow direction on the new filter; it must face the interior of the car—installing it backward reduces efficiency. Last time, I didn’t check the manual carefully and ended up installing it incorrectly, wasting half an hour with no airflow. It’s recommended to inspect it every 10,000 km, especially in northern regions where spring willow catkins can easily clog the vents. DIY replacement costs just 20-30 RMB, much cheaper than visiting a 4S shop.

Was this review help?
7
Share
Expand All
MilesMarie
10/02/2025, 01:04:37 AM

During car repairs, it's common to see owners coming in to replace the cabin air filter, and the one in the Changan Alsvin V7 is relatively easy to locate. It's mainly situated behind the inner panel of the glove box, and no tools are required for removal. First, empty all items from the storage compartment, then press both sides inward with your hands to release and remove the box. At this point, pay attention to a small latch on the black cover panel behind it; pinch and lift it upwards to reveal the filter slot. I've noticed many owners forget to clean out leaves and dust from the filter slot before installing a new one, which can still result in reduced airflow. It's advisable to check it every season change, especially for vehicles frequently driven on dirt roads as their AC ducts are particularly prone to dust accumulation. Those with good DIY skills can complete the task in just ten minutes.

Was this review help?
6
Share
Expand All
PaigeRose
11/15/2025, 01:46:15 AM

When I first bought the car, I had no idea where the cabin air filter was. Later, I figured out from a video that the Yuexiang V7's filter is located behind the glove box. First, empty the glove box, then pull the storage compartment firmly towards you until you hear a click. Be careful not to break the clips when lifting the plastic cover behind it. The filter is folded in a pleated shape. Last week, I replaced it and noticed that the original filter is much thicker than the ones bought online. Remember to wear a mask when changing it, as the old filter is full of dust and can be very irritating when shaken. Doing it myself saved me 50 yuan in labor costs, but bending over for a long time really made my back sore. The design of this location is quite reasonable, much more convenient than models that require dismantling the dashboard.

Was this review help?
5
Share
Expand All
MarleyAnn
01/05/2026, 03:24:52 AM

The air filter location of the Yuexiang V7 is designed for easy replacement. It's located behind the glove compartment on the passenger side, and the removal process only requires three steps: empty the glove box, press both sides to remove the compartment, and lift the cover to take out the filter. The key is to purchase the correct size; measure the length and width of the old filter before ordering online. I've noticed significant differences in performance among different filter brands—those with activated carbon can eliminate odors but may slightly reduce airflow. Last time, I used a vacuum to clean out the debris from the filter slot before installing a new one, and the airflow noticeably improved. This kind of routine maintenance doesn't require a trip to the repair shop; doing it yourself saves both time and money.

Was this review help?
16
Share
Expand All
LillianAnn
04/02/2026, 03:08:27 AM

As a six-year veteran owner of the V7, I change the cabin air filter twice a year. It's located behind the interior panel of the glove compartment on the passenger side - the key is to avoid using excessive force during removal. After opening the glove box, locate the plastic protrusions on both sides and press them inward simultaneously to remove the entire storage compartment. The white cover behind has arrow markings indicating airflow direction - remember to align the new filter accordingly. Once before rainy season, I discovered mold spots growing inside the filter, so I recommend checking every 3-4 months in humid regions. DIY replacement costs only about 20 yuan, while dealership quotes are over three times more expensive. The filter's condition directly impacts in-cabin air quality - this is something worth prioritizing.

Was this review help?
4
Share
Expand All
More Q&A

How to Repair Exposed Primer on Bumper?

The methods for repairing exposed primer on a bumper are: 1. If the scratch is not deep, you can use polishing wax to buff it; 2. You can use a touch-up paint pen to cover it, but there may be color discrepancies; 3. If the scratch has exposed the primer, it is recommended to go to a 4S shop for repair. The car bumper is a safety device that absorbs and mitigates external impacts, protecting the front and rear of the vehicle body. The car bumper is located in most areas at the front and rear of the car, designed on the surface to avoid damage to the vehicle's safety system caused by external damage. It has the ability to reduce injuries to drivers and passengers during high-speed collisions. The car bumper consists of three parts: the outer panel, buffer material, and crossbeam.
103
Share

At What Age Can a Child Use a Car Seat?

Car seats can be used after six months of age. For children under one year old or weighing less than 10 kilograms, an infant carrier-style car seat is more suitable. For children between one and three years old, weighing approximately 10 to 20 kilograms, a convertible car seat is more appropriate. For children over three years old, a booster car seat is recommended. A car seat is specifically designed for children of different weights and age groups, installed in a vehicle to effectively enhance child passenger safety. In the event of a car collision or sudden deceleration, it can reduce the impact force on the child and limit body movement, thereby minimizing physical injuries, providing restraint and protection.
106
Share

Should You Turn on AC When Using Car Air Conditioner in Winter?

In winter, there is no need to turn on the AC when using the car air conditioner. The AC button is used for air conditioning regulation, primarily for activating the compressor to provide cooling during summer. The warm air in a car's heating system comes from the heat generated by the engine during operation. After the engine's cooling system dissipates heat from the engine, a fan directs this heat into the car's interior to provide warmth. The correct way to use the car's heating system is: after starting the car and allowing the engine to warm up until the temperature gauge reaches the midpoint, turn on the heating system. Set the air circulation to external initially to expel cold air from the cabin. After 2 to 3 minutes, switch the air circulation to internal for optimal warmth.
113
Share

What are the symptoms of excessive valve clearance?

The symptoms of excessive valve clearance are: 1. Insufficient engine intake and incomplete exhaust, leading to a decrease in engine power; 2. Impact noise between components of the valve train, accelerating wear; 3. A continuous crisp tapping sound. The larger the valve clearance, the lower the combustion chamber pressure, resulting in poorer power and louder engine noise. When the engine is running, the valves expand due to temperature rise. If there is no clearance or the clearance is too small between the valves and their transmission components in the cold state, the thermal expansion of the valves and their transmission components in the hot state will inevitably cause the valves to close improperly. This results in air leakage during the compression and power strokes, reducing power output. In severe cases, it may even make the engine difficult to start.
111
Share

Where to Renew an Expired Vehicle Inspection?

For an expired vehicle inspection, you need to go to the vehicle management office. The motor vehicle driving license clearly states the date by which the annual inspection must be completed, and exceeding this deadline by even one day is considered illegal. If you need to apply for a late inspection, the vehicle owner must personally submit a written application for the late inspection to the traffic police department and promptly have the vehicle inspected at the vehicle inspection station. Before the annual inspection, make sure to settle any traffic violations and pay the necessary taxes. Bring a copy of the valid compulsory insurance policy to complete the procedure. If the vehicle has not passed the annual inspection, be cautious when driving, as being caught during a traffic stop may result in the vehicle being impounded and fines being issued. Vehicle inspection is a mandatory test for all vehicles that have obtained official license plates and driving licenses, meaning an annual check-up based on the safety technical conditions for motor vehicle operation. Vehicle annual inspections help promptly eliminate potential safety hazards, encourage better vehicle maintenance, and reduce the occurrence of traffic accidents.
102
Share

How to Adjust Car Seat Position?

Adjusting the car seat position involves the following steps: 1. When adjusting the height, it is generally recommended to maintain a distance of one to two fists between the head and the car roof. This distance ensures that the eye level is positioned slightly above the center of the vertical distance of the front windshield. 2. When adjusting the backrest, lean slightly backward, avoiding an overly upright position, which reduces the distance between the body and the steering wheel. 3. The headrest should be as close to the head as possible, preferably not exceeding 7cm. Car seats can be categorized by shape into separate seats and bench seats; by function into fixed, removable, and adjustable seats; and by passenger capacity into single, double, and multi-person seats.
116
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.