···
Log in / Register

What is the normal tire pressure for the Bestune B70?

1Answers
NovaMarie
07/28/2025, 10:57:29 PM

The normal tire pressure for the Bestune B70 is 2.3-2.5 bar. Tire pressure, strictly speaking, refers to the air pressure inside the tire. Hazards of over-inflation: Reduced friction and adhesion of the tire, affecting braking performance; causes steering wheel vibration and deviation, reducing driving comfort; accelerates wear on the central tread pattern of the tire, shortening its lifespan; increases body vibration, indirectly affecting the lifespan of other components. Decreased puncture resistance. When encountering sharp objects like nails or glass on the road, they can easily penetrate the tire, causing internal cracks and blowouts, leading to tire bursts. Hazards of under-inflation: Increases the friction coefficient with the road surface, leading to higher fuel consumption; causes heavy steering and deviation, posing risks to driving safety; increases movement in various parts of the tire, leading to excessive rolling and abnormal heat generation; reduces the functionality of the cords and rubber, causing delamination or cord breakage and excessive friction with the rim, resulting in damage to the bead area and abnormal wear.

Was this review help?
104
Share
More Q&A

How to Repair Exposed Primer on Bumper?

The methods for repairing exposed primer on a bumper are: 1. If the scratch is not deep, you can use polishing wax to buff it; 2. You can use a touch-up paint pen to cover it, but there may be color discrepancies; 3. If the scratch has exposed the primer, it is recommended to go to a 4S shop for repair. The car bumper is a safety device that absorbs and mitigates external impacts, protecting the front and rear of the vehicle body. The car bumper is located in most areas at the front and rear of the car, designed on the surface to avoid damage to the vehicle's safety system caused by external damage. It has the ability to reduce injuries to drivers and passengers during high-speed collisions. The car bumper consists of three parts: the outer panel, buffer material, and crossbeam.
103
Share

At What Age Can a Child Use a Car Seat?

Car seats can be used after six months of age. For children under one year old or weighing less than 10 kilograms, an infant carrier-style car seat is more suitable. For children between one and three years old, weighing approximately 10 to 20 kilograms, a convertible car seat is more appropriate. For children over three years old, a booster car seat is recommended. A car seat is specifically designed for children of different weights and age groups, installed in a vehicle to effectively enhance child passenger safety. In the event of a car collision or sudden deceleration, it can reduce the impact force on the child and limit body movement, thereby minimizing physical injuries, providing restraint and protection.
106
Share

Should You Turn on AC When Using Car Air Conditioner in Winter?

In winter, there is no need to turn on the AC when using the car air conditioner. The AC button is used for air conditioning regulation, primarily for activating the compressor to provide cooling during summer. The warm air in a car's heating system comes from the heat generated by the engine during operation. After the engine's cooling system dissipates heat from the engine, a fan directs this heat into the car's interior to provide warmth. The correct way to use the car's heating system is: after starting the car and allowing the engine to warm up until the temperature gauge reaches the midpoint, turn on the heating system. Set the air circulation to external initially to expel cold air from the cabin. After 2 to 3 minutes, switch the air circulation to internal for optimal warmth.
113
Share

What are the symptoms of excessive valve clearance?

The symptoms of excessive valve clearance are: 1. Insufficient engine intake and incomplete exhaust, leading to a decrease in engine power; 2. Impact noise between components of the valve train, accelerating wear; 3. A continuous crisp tapping sound. The larger the valve clearance, the lower the combustion chamber pressure, resulting in poorer power and louder engine noise. When the engine is running, the valves expand due to temperature rise. If there is no clearance or the clearance is too small between the valves and their transmission components in the cold state, the thermal expansion of the valves and their transmission components in the hot state will inevitably cause the valves to close improperly. This results in air leakage during the compression and power strokes, reducing power output. In severe cases, it may even make the engine difficult to start.
111
Share

Where to Renew an Expired Vehicle Inspection?

For an expired vehicle inspection, you need to go to the vehicle management office. The motor vehicle driving license clearly states the date by which the annual inspection must be completed, and exceeding this deadline by even one day is considered illegal. If you need to apply for a late inspection, the vehicle owner must personally submit a written application for the late inspection to the traffic police department and promptly have the vehicle inspected at the vehicle inspection station. Before the annual inspection, make sure to settle any traffic violations and pay the necessary taxes. Bring a copy of the valid compulsory insurance policy to complete the procedure. If the vehicle has not passed the annual inspection, be cautious when driving, as being caught during a traffic stop may result in the vehicle being impounded and fines being issued. Vehicle inspection is a mandatory test for all vehicles that have obtained official license plates and driving licenses, meaning an annual check-up based on the safety technical conditions for motor vehicle operation. Vehicle annual inspections help promptly eliminate potential safety hazards, encourage better vehicle maintenance, and reduce the occurrence of traffic accidents.
102
Share

How to Adjust Car Seat Position?

Adjusting the car seat position involves the following steps: 1. When adjusting the height, it is generally recommended to maintain a distance of one to two fists between the head and the car roof. This distance ensures that the eye level is positioned slightly above the center of the vertical distance of the front windshield. 2. When adjusting the backrest, lean slightly backward, avoiding an overly upright position, which reduces the distance between the body and the steering wheel. 3. The headrest should be as close to the head as possible, preferably not exceeding 7cm. Car seats can be categorized by shape into separate seats and bench seats; by function into fixed, removable, and adjustable seats; and by passenger capacity into single, double, and multi-person seats.
116
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.