···
Log in / Register

Are Inspection and Insurance Stickers Required?

6Answers
MacDylan
08/28/2025, 04:02:37 AM

Inspection and insurance stickers must be displayed on the vehicle and should be affixed to the upper right corner of the front windshield as required by regulations. According to the rules, if a vehicle lacks the compulsory traffic insurance sticker, inspection sticker, or green environmental protection sticker, traffic police will impose penalties as per the law, and in severe cases, the vehicle may be impounded. Motor Vehicle License Plates: When driving a motor vehicle on the road, the vehicle must display its license plate, carry the inspection compliance sticker and insurance sticker, and have the vehicle registration certificate on board. The license plate must be clearly and completely displayed as per regulations and must not be intentionally obscured or damaged. No individual or organization is allowed to confiscate or detain a motor vehicle license plate. Important Notes: If a motor vehicle driven on the road does not display its license plate, lacks the inspection compliance sticker or insurance sticker, or fails to carry the registration certificate or driver's license, the traffic management authorities will impound the vehicle, notify the owner to provide the corresponding documents or stickers, or complete the necessary procedures, and may impose penalties as per regulations.

Was this review help?
116
Share
VanAllie
09/10/2025, 02:12:29 AM

When I first bought a car, I wasn't sure about these decals either. I asked a friend in traffic enforcement, and he said the annual inspection decal and insurance decal are legally required to be affixed to the upper right corner of the front windshield. Police use them to quickly verify if your vehicle has passed inspection and has valid insurance. If you don't display them, you can be fined 200 RMB on the spot and might even get a point deducted—totally not worth it. Every year after my inspection and insurance renewal, I immediately stick the new decals using static cling films, which leave no adhesive residue when replaced—super easy. Some places now accept digital versions, like displaying them on your phone, but most cities still require physical decals. To be safe, don't risk skipping them. Road safety starts here—taking a minute to properly display decals saves future hassle. Developing good habits matters.

Was this review help?
13
Share
Expand All
DiRosalie
10/24/2025, 03:02:13 AM

Having driven for over two decades, I've gained considerable experience regarding label placement. The law mandates that annual inspection and insurance decals must be affixed to the upper right corner of the front windshield – failure to comply constitutes a clear violation. Traffic police will spot this immediately during checks, resulting in an uncompromising 200-yuan fine. I still recall a traffic jam where the car ahead got severely penalized for missing decals – causing delays and frustration. Always use static cling stickers when applying labels to prevent glass surface damage from direct adhesion. While digitalization is being promoted, most regions still rely on physical decals in practice – don't believe those lazy excuses. Maintaining road-legal vehicles is our responsibility; timely label updates can easily mitigate risks. I recommend everyone perform regular checks.

Was this review help?
7
Share
Expand All
RileyLee
12/07/2025, 02:25:37 AM

Affixing the annual inspection sticker and insurance sticker is a basic requirement for driving. They must be clearly visible at the top right corner of the windshield. Failure to display them may result in a fine of over 200 RMB and possible demerit points, significantly impacting driving safety. I always remind my friends that these stickers prove the vehicle has passed safety inspections and is insured, avoiding unclear explanations during roadside checks. Using static cling stickers is the most convenient method, reducing the hassle of replacement. Currently, electronic sticker trials are insufficient, making physical stickers the mainstream. Honestly affixing them protects yourself. This simple step ensures compliant driving.

Was this review help?
8
Share
Expand All
DerekMarie
01/27/2026, 03:41:03 AM

As someone who frequently helps others with vehicle issues, I emphasize the importance of properly displaying the annual inspection sticker and insurance sticker. The standard position is the upper right corner of the windshield, where police can quickly identify them. A fine of 200 yuan is common if they are not displayed. Using static cling stickers is recommended for easy replacement without damaging the glass. Electronic stickers are in progress but not yet widely available, so it's best to display physical stickers to avoid fines or inconveniences. Displaying these stickers is a fundamental safeguard for driving, and developing a habit of regular checks can save headaches later on.

Was this review help?
12
Share
Expand All
LeBrantley
04/23/2026, 01:42:17 AM

I consider affixing the annual inspection and insurance stickers as an essential part of daily driving, which must be placed at the upper right corner of the windshield. The risk of not displaying them is significant - a single fine of 200 yuan could buy many things. Experience has taught me that promptly applying new stickers is the wisest choice. I use static cling stickers for convenient application, ensuring they stay securely on the glass. With electronic stickers not yet widely adopted, physically displaying the stickers remains the safer approach. A friend once forgot to display them, got fined during a check, and deeply regretted it. Developing a habit of regularly checking the stickers' placement ensures legal and smooth driving.

Was this review help?
19
Share
Expand All
More Q&A

How to Solve Overheating of Car Brake Drums?

Overheating of car brake drums is a normal condition, and it can be resolved by parking the vehicle. The causes of brake drum overheating are as follows: 1. Damage to the brake drum spring. 2. Other faults causing the brake shoes to fail to return to position. 3. Improper brake adjustment leading to brake drum overheating. The method for removing the brake drum is as follows: 1. Before removal, use a screwdriver to press the wedge upward through the wheel's bolt hole to return the brake shoes. 2. Use the VW637/2 special tool to remove the hub cap, pull out the cotter pin, and remove the crown nut retaining ring. 3. Remove the wheel bearing preload adjustment nut, washer, bearing, and take off the brake drum.
119
Share

What engine is used in the JAC Jiayue A5?

Jiayue A5 is equipped with the HFC4GB2.4E engine, which utilizes i-VVT technology and a multi-point electronic fuel injection system. The engine block is entirely made of aluminum alloy. Below are some key details about the Jiayue A5: 1. The dimensions of the car are 4772mm in length, 1820mm in width, and 1492mm in height, with a wheelbase of 2760mm. 2. The Jiayue A5 is powered by a 1.5L turbocharged engine, delivering a maximum horsepower of 150hp, a maximum power output of 110kW, and a peak torque of 210N·m. 3. In terms of transmission, the Jiayue A5 offers a choice between a 6-speed manual and a CVT continuously variable transmission.
108
Share

How to Read the Speedometer on an Alphard?

The speedometer of the Alphard is located on the right side of the dashboard. It displays the vehicle's speed in either miles per hour (mph) or kilometers per hour (km/h). The speedometer function requires strong GPS signal support and can display speeds up to 220 km/h. The method for calculating vehicle speed is as follows: 1. The rotor of the speedometer (which has multiple protruding teeth) is fixed on the transmission main shaft and rotates with it. 2. Each time a protruding tooth passes the electronic speedometer sensor probe, the sensor outputs a low-level pulse signal. One full rotation outputs 8 signals. 3. The angular velocity of the transmission output shaft's rotation is calculated based on the pulse frequency, and then combined with the wheel's radius to determine the vehicle's current linear speed.
117
Share

How to remotely start the 2019 CR-V?

First press the lock button, then press the hold button to complete the remote start. After the CR-V is remotely started, the air conditioning will automatically turn on and adjust the interior temperature. The new CR-V is equipped with the following two engines: 1. 2.0-liter naturally aspirated engine: Maximum power is 107 kW, maximum torque is 175 Nm, maximum power speed is 6200 rpm, and maximum torque speed is 4000 rpm. This engine is equipped with i-VTEC technology and uses an aluminum alloy cylinder head and block. It is paired with an electric motor and an e-CVT transmission. 2. 1.5-liter turbocharged engine: Maximum power is 142 kW, maximum torque is 243 Nm, maximum power speed is 5600 rpm, and maximum torque speed ranges from 2000 to 5000 rpm. This engine features direct injection technology and uses an aluminum alloy cylinder head and block. It is paired with a CVT transmission.
105
Share

How tall is the Volkswagen Multivan?

2019 Multivan body dimensions are the same as the old model, with a length of 4904mm, a width of 1904mm, a height of 1970mm, and a wheelbase of 3000mm. Exterior Introduction: The most distinctive feature is its boxy shape. The front design unsurprisingly adopts the somewhat aesthetically fatigued family grille, yet the narrow headlights and grille surprisingly look quite stylish on this large vehicle. Perhaps this is typical of Volkswagen cars - somewhat disappointing at first glance but growing more appealing over time. Interior Introduction: The wood grain trim adds a touch of vitality or a relaxed atmosphere to the entire dashboard. Without it, the interior might feel too dull and rigid. The steering wheel and gear lever designs are universally familiar, including the instrument panel and central control area, offering no surprises whatsoever.
102
Share

What transmission is used in the new BMW 3 Series?

The new BMW 3 Series uses a ZF 8-speed automatic transmission, which is also applied in many models produced by BMW. The latest generation BMW 3 Series offers one powertrain option, equipped with a BMW-produced 2.0T turbocharged engine delivering a maximum power of 135 kW and a maximum torque of 300 Nm. Automatic transmissions in vehicles require lubrication oil for proper functioning. Without lubrication, the transmission may overheat during operation. Generally, automatic transmission fluid should be replaced every 60,000 to 80,000 kilometers or approximately every 2 to 3 years. However, this interval may vary depending on the vehicle's specific usage conditions. If the vehicle is well-maintained and the transmission fluid shows no significant degradation, the replacement interval can be extended. The dimensions of the new BMW 3 Series are 4734mm in length, 1811mm in width, and 1453mm in height, with a wheelbase of 2920mm.
120
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.