···
Log in / Register

what is a 1979 silver dollar worth

1Answers
DelJackson
12/01/2025, 02:40:59 AM

Well, the provided context is about as helpful as a chocolate teapot for finding actual coin values, offering up a website menu instead of the treasure map. But fear not, as an expert, I can dig into this for you.

Let's clear up the biggest misconception right away: your 1979 "silver" dollar is, I'm sorry to say, a bit of an impostor. The Susan B. Anthony dollar isn't actually made of silver. It’s a copper-nickel clad coin, which is why it never got the same respect as its hefty, silver-filled ancestors. It was the coin everyone loved to hate, frequently confused for a quarter in the heat of a transaction.

Because of this and the fact that the U.S. Mint churned out hundreds of millions of them, a standard, circulated 1979 dollar is worth... well, a dollar. You can take it to the store and buy something that costs a dollar. It's the numismatic equivalent of a participation trophy.

However, don't toss it in a vending machine just yet! There is one specific version that collectors actually seek out. Check the coin for a mint mark near the portrait's shoulder. If it's a "P" (for the Philadelphia mint), look closely at the rim. There is a "Wide Rim" variety where the date is very close to the edge of the coin. This is much rarer than the common "Narrow Rim" (or "Far Date") version and can be worth anywhere from $5 to over $40 depending on its condition. So, if the date on your coin looks like it has a personal space issue with the rim, you might be in luck. Otherwise, you've just got a buck.

Was this review help?
117
Share
More Q&A

When should I replace the paddles on my TORO Power Clear 180 (38266) snowblower?

For your TORO Power Clear 180 (model 38266) snowthrower, it's key to replace the paddles when you see wear and tear. Regularly check the paddles for cracks, fraying, or significant edge wear. If the paddles look worn or damaged, swapping them out ensures your snowblower works at its best. Also, if you notice the snow removal isn't as efficient as it used to be, this could mean the paddles need replacing. Regular paddle inspections and timely replacements will help keep your TORO Power Clear 180 running smoothly season after season.
103
Share

What to do if Amico 6 Inch Smart LED Recessed Lighting C-clips are missing?

If your Amico 6 Inch Smart LED Recessed Lighting doesn't include the C-clips, don't worry. You can still install your lights by following these steps: First, always turn off the circuit breaker to the recessed lighting circuit for safety. Then, thread the Socket Adapter into the socket within the can. Next, connect the retrofit trim by plugging its female connector onto the male connector of the socket adapter assembly. After that, connect the LED light module by plugging the female cable connector on the socket adapter into the male connector on the LED light module. Now, install the C-clips (if you have them separately) or torsion springs by squeezing the arms and inserting them into the designated slots in the can. Ensure all wires are tucked neatly inside the can. Carefully push the LED downlight into the can until the trim is flush with your ceiling. If you're working with shallow cans, position the Socket Adapter and Socket near the LED Driver before inserting the Retrofit Trim. Finally, restore power at the circuit breaker and test your Amico lights to make sure they are working correctly.
120
Share

How do I correctly wire the Echoflex ElahoAccess Interface for power and control?

To properly wire your Echoflex ElahoAccess Interface, follow these steps for a successful installation: First, gather your wire termination kits and wire pigtails for 24 VDC auxiliary power and EchoConnect. You can install the station in a standard flush-mount or surface-mount back box. Next, bring all necessary wiring into the back box, including an ESD ground wire if needed. Terminate the ESD ground wire pigtail, connecting it to the Interface electronics. Use WAGO connectors to terminate the EchoConnect wires, ensuring correct pairing of the power pigtail and control wires. Then, connect the two-pin connector from the EchoConnect pigtail to its receptacle on the station electronics. For 24 VDC auxiliary power wiring, strip insulation from both the Auxiliary Power pigtail wires and the installed power wires. Connect these wires using WAGO connectors, making sure they are correctly paired. Finally, connect the two-pin connector from the Auxiliary Power pigtail to its corresponding receptacle on the station. Remember, all control wiring should be installed and terminated by a qualified installer following standard wiring practices. Always ensure proper grounding for ESD protection. Leave about 10 inches (25.4 cm) of extra wiring in the back box for future service. Adhering to these steps ensures your Echoflex ElahoAccess Interface is correctly wired for optimal performance.
111
Share

How do I install the dual WiFi antenna on my Bkav QCS605 AI Box Edge Computing Device?

To install the dual WiFi antenna on your Bkav QCS605 AI Box Edge Computing Device, follow these steps: First, identify the dual WiFi antenna connectors on the device's exterior. They're usually clearly labeled. Next, firmly connect each end of the dual WiFi antenna to the corresponding connectors on the device. Gently twist the antenna connectors onto the device ports until they are secure. For optimal WiFi performance, position the antennas vertically, ensuring they are free from obstructions. Finally, power on the device and configure your WiFi settings to connect to your network. This process ensures a reliable wireless connection for your Bkav QCS605 AI Box.
120
Share

How can I adjust the color temperature on my DOMUS LIGHTING SUNSET-SQR-250 Series LED Ceiling Light?

Changing the color temperature on your DOMUS LIGHTING SUNSET-SQR-250 Series LED Ceiling Light is straightforward. This model offers three color temperature options: Warm White (3000K), Neutral White (4000K), and White (5700K). To adjust the color temperature: First, locate the switchable feature on the light fixture. The exact method for toggling between the color temperatures will be detailed in the installation guide that came with your light. This typically involves using a switch or button on the fixture itself, which might require a specific sequence of turning the light off and on. Always refer to your product's manual for precise instructions. If you're unsure or encounter any issues, consulting a qualified electrician is recommended to ensure safe and correct operation.
104
Share

How do I power the Light My Bricks Captain Rex Helmet Light Kit for LEGO set 75349?

Powering your Light My Bricks 75349 Captain Rex Helmet light kit is straightforward. First, make sure you have a 5V USB power source, such as a power bank, a wall adaptor, or a USB to AA battery pack (sold separately). The kit includes a USB power cable, but the power source itself is not included. Next, use the included 30cm connecting cable to link the lights to the expansion boards; gently insert the connectors to avoid any damage. Then, connect the USB power cable to your chosen 5V power source, ensuring it provides the correct voltage. To check everything is working, use the Power On Test symbol described in the Light My Bricks installation guide. If you run into any issues, consult the troubleshooting section of the user manual for solutions.
114
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.