Based on general furniture expertise, as the provided search context does not contain relevant information, here is a guide on how to disassemble a recliner sofa. While specific mechanisms can vary by manufacturer, most models follow a similar modular design that allows for easier transport.
To begin the disassembly process, you will typically start with the backrests. Feel along the gap where the backrest meets the main body of the sofa, usually towards the outside edge. You are looking for a small metal lever or a locking tab. On many models, this is hidden beneath a flap of fabric or upholstery that is secured with a hook-and-loop fastener. Once you locate the lever, you will need to lift it up or, in some cases, use a flathead screwdriver to gently pry it open. With the lever disengaged, you should be able to lift the backrest straight up and off the metal mounting brackets on the sofa's base. Repeat this process for each reclining back section.
After the backrests have been removed, you can separate the main seating sections. If your sofa has a center console, it may lift straight up and out once the adjoining backrests are gone. For the main seat sections, carefully tip the sofa forward to access the underside. The sections are usually connected to each other with interlocking metal brackets or are bolted together. For brackets, one section will need to be lifted up to disengage from the other. If they are bolted, you will need the appropriate wrench or socket to remove the hardware. It is advisable to have a second person assist with lifting and separating these heavier base components.
Finally, check if the feet need to be removed for clearance through doorways. Most sofa feet are simply screwed into the frame and can be twisted off by hand. As you disassemble the sofa, it is a good practice to keep all screws, bolts, and small hardware together in a labeled bag to ensure a smooth reassembly process. Always consult the manufacturer's instructions if they are available, as this will provide the most accurate guidance for your specific model.
