Installing casters on your Extreme Tools 41" 4 Drawer Chest and Roller Cabinet Combo enhances its mobility. Here's a step-by-step guide:
-
Caster Installation:
- Begin by ensuring the lid and drawers of your Extreme Tools cabinet are locked for safety.
- With assistance, carefully lay the cabinet on its back on a soft, protective surface.
- Position each swivel caster at the designated mounting points on the bottom of the cabinet.
- Secure each caster using M10 bolts, inserting them through the caster and into the corresponding holes on the cabinet.
- Tighten all four bolts on each caster securely to ensure stability.
- Before standing the cabinet upright, make sure all casters are locked.
-
Securing the Top Chest:
- Carefully place the chest on top of the roller cabinet.
- Open the top drawer of the roller cabinet and locate the two pre-drilled holes situated under the top surface.
- Insert M6 x 12mm hex bolts through these holes and into the corresponding holes on the underside of the top chest.
- Tighten these bolts securely to fasten the chest to the cabinet.
-
Handle Installation:
- For easier maneuvering, assemble the handle first, if not already done.
- Position the handle over the designated holes on the cabinet.
- Attach the handle using the provided M6 socket head screws.
- Ensure the screws are securely tightened.
By following these steps, you'll successfully install the casters and handle, optimizing your Extreme Tools 41" 4 Drawer Chest and Roller Cabinet Combo for convenient use.
