
To adjust the temperature on your SILVERCREST SHL 2000 A1 Fan Heater, follow these simple steps. First, ensure the heating level switch (labeled "2" in the manual) is set to "0" to power off the device. Next, plug the heater into a grounded outlet protected by a residual current device with overload protection. To start the heater, turn the temperature regulator (labeled "4" in the manual) clockwise until you hear a click. Now, set the heating level switch to your desired setting. You have three options: "Fan" for fan-only mode, "Heating level 1" for 1000W, and "Heating level 2" for 2000W. The control light (labeled "3" in the manual) will illuminate when the heater is on. To fine-tune the temperature, rotate the temperature regulator clockwise to its maximum setting. If the room doesn't reach your preferred temperature, slowly turn the regulator counter-clockwise until you hear a click. This activates the built-in thermostat, which will automatically manage the heating based on your setting. Note that when the thermostat is set to its minimum (MIN) position, the heater is off. To turn the SILVERCREST SHL 2000 A1 off, switch the heating level to "Fan" and allow the heating elements to cool for 30 seconds. Finally, switch the heating level switch to "0" and unplug the device. For comprehensive instructions and safety guidelines, always consult the SILVERCREST SHL 2000 A1 Fan Heater Instruction Manual.


