How do I safely replace the router bit on my Ozito PXBPRS-018 PXC 18V Plunge Router?

[StephanieDella]

Changing the router bit on your Ozito PXBPRS-018 PXC 18V Plunge Router is a straightforward process. Follow these steps for safe and effective bit changes:

1. Safety First:

   • Always ensure the Ozito PXBPRS-018 router is turned off and the battery is removed before changing bits. This prevents accidental starts.
   • Wear gloves to protect your hands from sharp router bits, which can also be hot after use.
   • Only use the router unit with a compatible base for safe operation.

2. Removing the Existing Router Bit:

   • Detach the plunge router base from the router unit.
   • Use the smaller spanner provided to secure the spindle. Then, use the larger spanner to loosen the collet nut.
   • Insert the shaft of the router bit (not included) fully into the collet.
   • Engage the spindle lock and tighten the collet nut using your fingers.
   • Release the spindle lock and fully tighten the collet nut using both spanners.

3. Installing a New Router Bit:

   • If a different collet size is needed, completely remove the collet nut and replace the collet. Reattach the collet nut, but don’t tighten it fully yet.
   • Insert the shaft of the new router bit entirely into the collet.
   • Engage the spindle lock while you tighten the collet nut with your fingers.
   • Release the spindle lock and then use both spanners to fully tighten the collet nut.

4. Final Inspection:

   • Double-check that the router bit is securely fastened in the collet before use.
   • Reattach the plunge router base to the router unit.

Following these steps ensures you can confidently and safely change the router bits on your Ozito PXBPRS-018 PXC 18V Plunge Router.