Setting up your MONACOR IT-12M Interpretation System Base Unit and IT-12D Interpretation Consoles involves a few key steps. First, for the physical setup: Install the base unit in a standard 19" rack using the included brackets. Then, connect your IT-12D interpretation consoles to the base unit; up to eleven consoles can be linked together. Plug microphones directly into the combi jack located on the front panel of the base unit. If you're using wireless transmitters, connect them to the 12V power supply connections on the base unit. Next, for configuration: Use the interpretation console to set up the interpretation channels, which you can save permanently on the console. Configure the active and standby channels on the interpretation console, and adjust headset connections, including volume and microphone settings. Make use of the relay interpreting function via the 11-step language selector. Use the console's push-buttons to switch between relay and floor languages. For power, the interpretation console receives its power from the base unit. Finally, take advantage of the additional features: The base unit includes a slow-down signal, an alarm function, and status LEDs. It also provides 48V phantom power for your microphones. You can record interpretations using the two record outputs on the interpretation console. By following these steps and consulting the detailed manual, you can ensure your MONACOR IT-12M and IT-12D system is correctly configured for effective multilingual interpretation.
