Assembling your Pro Breeze PB-F06B 16-inch Pedestal Fan is straightforward. Here's a step-by-step guide:
-
Base Assembly:
- Unscrew the base screws and washer from the outer pole.
- Insert the outer pole into the base plate.
- Secure by placing the washer underneath the base plate and inserting and screwing the base screws through the washer and into the outer pole.
- Place the assembled base on a level surface.
-
Main Body Assembly:
- Turn the height adjustment collar counterclockwise to loosen.
- Adjust the inner pole to your desired height.
- Turn the height adjustment collar clockwise to secure the height.
- Insert the fan body onto the inner pole and turn the fan body securing screw clockwise to secure it.
-
Fan Blade and Grille Assembly:
- Rear Grille: Remove the blade cap (turn clockwise) and the clamping nut (turn counterclockwise).
- Install the rear grille by aligning it with the three pins on the front motor cover.
- Lock and secure the rear grille with the clamping nut by turning it clockwise.
- Fan Blade: Insert the fan blade onto the motor shaft, ensuring the motor shaft pins fit into the groove on the rear of the fan blade.
- Fit the blade cap onto the motor shaft and turn counterclockwise to secure.
-
Front Grille Assembly:
- Loosen the safety screw with a screwdriver to open the locking clip at the bottom of the guard ring.
- Align the front and rear grilles.
- Press the guard ring firmly over the rear grille.
- Tighten the safety screw with a screwdriver to close the locking clip at the bottom of the guard ring.
By following these instructions, your Pro Breeze PB-F06B fan should be ready to provide a refreshing breeze. If you have any issues, the manual contains more detailed diagrams and safety information.
