Installing your Progress Lighting P710114 Two-Light Brushed Bronze Mid-Century Modern Wall Sconce is straightforward with these steps. First, make sure you have all the parts. You'll need a Phillips screwdriver, pliers, wire strippers, safety glasses, electrical tape, and a ladder. Safety first: turn off the power at your circuit breaker! Now, let's begin the assembly: Loosely attach screws (AA) and hex nuts (DD) to the round mounting plate (CC). Adjust the length of the screws to match your fixture canopy. Attach the mounting plate assembly to your outlet box using its screws, ensuring a secure fit. Next, lift the sconce to the mounting surface and pass screws (AA) through the mounting holes on the fixture's canopy. Adjust the screw length to show about 3/16" of threads. Tighten hex nuts (DD) against the round mounting plate (CC). Now, strip 3/8" of insulation from the wire ends and connect the fixture wires to your home's wires using wire nuts (BB): white to white, black to black. Don't forget the ground wires! Slide the fixture over screws (AA) and tighten it with cylinder nuts (EE). Insert the correct lamps (not included), use 60-watt MAX incandescent candelabra base lamp, SBCFL, or SBLED. Finally, attach the glass shade (D) to the retaining bracket fixture (A) and secure it with the glass cover (C) and coupling (B). For maintenance, always turn off the power before cleaning or changing bulbs. Use a damp cloth; avoid abrasive cleaners or alcohol. Your Progress Lighting sconce is covered by a one-year warranty against defects. For help, contact Progress Lighting customer service at 800-447-0573 or customerservice@progresslighting.com.
