How do I install the FABTECH FTS22338 Rear Lower Link Kit?

[LeAustin]

Installing the FABTECH FTS22338 Rear Lower Link Kit correctly involves several key steps to ensure optimal performance and safety. Before you begin, gather all necessary tools as listed in the FABTECH manual, and check local regulations regarding such modifications. It's also recommended to get a front-end alignment before installation and to verify the differential fluid level. Carefully read all warnings and warranty information provided by FABTECH.

Here's a breakdown of the installation process:

1. Preparation:

   • Disconnect the negative battery terminal and safely lift the rear of your vehicle.
   • Support the frame using jack stands, then remove the rear wheels.

2. Component Removal and Assembly:

   • Remove the original rear lower link arms, saving the original hardware for reuse.
   • Install the bushings, sleeves, and zerk fittings into the new FABTECH lower link arms, using the provided grease.

3. Installation of New Link Arms:

   • Mount the new FABTECH rear lower link arms using the factory hardware, ensuring correct alignment. Torque these bolts to 180 ft-lbs.
   • Tighten the jam nut on the rod end, applying thread locking compound for security.

4. Final Steps:

   • Reinstall the wheels and tires, torquing the lug nuts to the manufacturer's specifications. Double-check the torque on all bolts.
   • After driving 50 miles, re-torque all nuts, bolts, and lug nuts, and repeat this check periodically.
   • Regularly inspect ball joints, uniballs, tie rod ends, and other steering components every 2500-5000 miles.
   • Affix the Driver Warning Decal and complete the product registration card provided by FABTECH.

FABTECH offers a Limited Lifetime Warranty against defects in workmanship and materials. However, alterations or improper installation may void this warranty. Be aware that this modification can affect vehicle handling and potentially increase the risk of rollover. If you use oversized tires, be mindful that braking capacity might be reduced, requiring adjustments to your driving habits. For additional support, contact FABTECH at 909-597-7800 or email [e-mail].