Installing your NEXEL commercial refrigerator or freezer correctly is key to optimal performance and longevity. Here's how to unpack, position, and install your unit, ensuring it meets manufacturer recommendations:
-
Unpacking:
- If the unit has been transported, let it stand upright for at least 24 hours before plugging it in.
- Remove all external packaging materials like cardboard, bubble wrap, and plastic.
- Move the refrigerator or freezer close to its final location before removing the wooden pallet it sits on.
- Use a screwdriver to remove the screws securing the L-brackets that attach the unit to the pallet.
- Detach the pallet by unscrewing the base rail anchor brackets and set the pallet aside.
- Carefully stand the cabinet upright, avoiding lifting it by the countertop.
-
Positioning:
- Place the unit on a sturdy, level surface to minimize vibrations and noise.
- Locate the unit in a well-ventilated indoor space, maintaining a minimum of 7cm (3 inches) of clearance between the cabinet and the walls to allow for proper air circulation.
- Keep the unit away from heat sources to maintain its refrigeration efficiency.
- Ensure the unit is in a dry environment to prevent rust that could compromise electrical insulation.
- Avoid exposing the unit to rain or direct sunlight, as this can reduce efficiency and potentially cause damage.
-
Sealing Cabinet to Floor:
- Position the cabinet with approximately one inch of space between the wall and the back of the unit for ventilation.
- Use a carpenter's level to ensure the cabinet is level from side to side and front to back.
- Apply an NSF-approved sealant around the base of the cabinet to seal the perimeter to the floor.
- Confirm that the cabinet is completely sealed to the floor around its entire base. Following these guidelines will help ensure your NEXEL commercial refrigerator or freezer operates efficiently and safely, as recommended by the manufacturer.
