How do I switch input sources for a specific output on my SEADA SWMP 4K Seamless Video Wall Matrix Switcher?

[Shelley]

Changing the input source for a specific output on your SEADA SWMP 4K Seamless Video Wall Matrix Switcher is straightforward. You can accomplish this using either the PC tool or the front panel controls:

Using the PC Tool:

1. Connect your control PC to the SWMP Matrix via an Ethernet cable.
2. Open the SEADA SWMP Matrix management software.
3. Configure your control PC's IP address to be within the same range as the SWMP Matrix (e.g., 192.168.0.x).
4. Within the software, check the 'Network' box, and then click the 'Search Device' button.
5. Select your SEADA SWMP device from the search results, and then click 'Disconnect'.
6. The PC tool will then display the current input-to-output routing.
7. To modify the routing, select the grid corresponding to the desired outputs, and then choose the desired input source on the same horizontal line.

Using the Front Panel:

1. Ensure the 'LOCK' key on the front panel is inactive. If it's active, press the 'LOCK' key to unlock it.
2. Press the output button (1 to 8) corresponding to the output you want to change.
3. Select the input source (1 to 8) you wish to display on that output.
4. Press 'ENTER' to execute the change. For example, pressing 'OUT 1 + IN 1 + ENTER' will display the video from input 1 on the screen connected to output 1.

Following these steps, either through the PC tool or the front panel, makes it easy to change the input source for a specific output on your SEADA SWMP 4K Seamless Video Wall Matrix Switcher. For comprehensive information on features like OSD, video wall setup, and IR remote control, please consult the SWMP Matrix User Guide, which is included in the Software & Documentation User CD provided with your purchase.