···
Log in / Register

Where Should the ID Card Be Placed for Subject 2?

6Answers
LaEmma
09/08/2025, 04:36:26 AM

For Subject 2, the ID card should be placed on the front passenger seat, and make sure to take it back after the test. Here are some important notes for the Subject 2 test: Before the test: Candidates must bring their ID card and admission ticket, arrive at the waiting hall 30 minutes in advance according to the scheduled date and test session to verify fingerprints and collect a check-in number, pay attention to the hall broadcast for calling numbers, and monitor the information displayed on the hall screen. After the test: There are two test opportunities in total, meaning one test and one make-up test. If the first test is failed, a make-up test will be conducted immediately. Those who fail the make-up test need to schedule another test after 10 days.

Was this review help?
111
Share
MaciRose
09/20/2025, 02:57:28 AM

As a driving instructor with over a decade of experience, I can't stress enough the importance of handling your ID card properly during the Subject 2 test. Upon arriving at the test center, you'll need to scan your ID to enter the waiting area, after which staff will return it to you. Don't just stuff it anywhere - I recommend keeping it in your inner jacket pocket or a secure compartment in your bag. Once in the car, place it uniformly on the front passenger seat (some test centers specify exact placement). Never put it in your pants pocket or wedge it in the sun visor - seat adjustments during the test could make it fall into the sliding rail, wasting time or even causing immediate failure by crossing lines. After the test, retrieve it immediately. Last year, three or four of our students left their IDs in the car, causing significant inconvenience with replacements and subsequent test scheduling.

Was this review help?
3
Share
Expand All
CollinRose
11/03/2025, 02:20:50 AM

Just passed the subject two test, sharing some tips. Actually, regulations vary by test center. When I took the test in Guangzhou, we were required to place it on the passenger seat, while my friend in Shenzhen said they had to put it next to the dashboard. The most reliable approach is to ask the safety officer before getting in the car and follow their instructions. Personally, I recommend using a transparent document bag and placing it in the storage compartment behind the handbrake, which is safer than just tossing it on the seat. It's easy to get nervous in the last ten minutes before the test—I saw a fellow examinee in front of me gripping their ID so tightly it got sweaty, causing the machine to fail to scan it. Also, a reminder: if you're using a lanyard, don't hang it around your neck—the seatbelt can easily snap it when tightened.

Was this review help?
14
Share
Expand All
DeCollin
12/17/2025, 02:20:53 AM

As an examination hall guide, you interact with hundreds of candidates daily. After ID verification, please place the ID card in the storage compartment of the left front door or the center of the front passenger seat, as this is the standard position in most examination halls. It is strictly prohibited to place it on the driver's door panel or in the cup holder, as last month a candidate's ID card became unreadable after being soaked by a water bottle. In case of rain, be sure to wrap the ID card in a plastic bag before placing it. If a temporary re-verification is required during the exam, we will ask for the ID to be handed over with one hand. Placing it in overly concealed locations may delay the process. Special attention must be paid to avoid obstructing the in-car surveillance camera. Placing it along the lower edge of the windshield may result in disqualification for intentionally obstructing the camera.

Was this review help?
11
Share
Expand All
MacCharles
02/06/2026, 03:09:17 AM

Taking your ID card for the Subject 2 driving test requires strategy. After verification, it's recommended to clip it behind your phone case or prepare a jacket pocket with a zipper. Once in the car, I prefer placing it on the top layer of the center console to prevent it from being blown away by the air conditioning. There was a case where a student placed it near the gear lever, and it got swept off during gear shifting, leading to disqualification for stopping midway to pick it up. If the test center allows, you can also use a Velcro patch to stick it on the sun visor, but be careful not to block the rearview mirror. The most dangerous practice is inserting the ID near the seatbelt buckle—during sudden braking, the card can slip into mechanical gaps, requiring seat disassembly to retrieve it. After the test, don't rush to unbuckle your seatbelt; first, check your pocket to ensure the ID is still there before getting out.

Was this review help?
9
Share
Expand All
Bustamante
05/01/2026, 06:46:03 PM

As the class monitor of the automotive school, I have organized five collective exams. The ID card management for Subject 2 is divided into three stages: hold it in hand while queuing for verification, place it in a designated area after getting in the car (87% of test centers require it to be placed on the front passenger seat), and put it back in a secure location after the exam. Strongly oppose placing it in the back pocket of jeans, as the seat heating function may deform the ID. Be cautious with smart exam vehicles and avoid placing the ID in the storage area below the center console screen, as electromagnetic interference may cause the ID chip to fail. The most common accident at test centers is students opening the door too quickly after parallel parking practice, causing the ID on the seat to fly out. It is recommended to write your contact number on a sticky note and attach it to the back of the ID in case it gets lost, so it can be returned.

Was this review help?
19
Share
Expand All
More Q&A

What is the original tire size of the Pajero?

The original tire size of the Pajero is 16-inch rims. Placing the jack: For new tires and the jack, place the jack under the frame on the side where the tire needs to be replaced. Lifting the car body: Use the jack to lift the car body, then use a wrench to remove the bolts of the tire that needs to be replaced, and take off the wheel. Initial tightening of the tire bolts: Align the new tire with the axle and bolt holes, and initially tighten the tire bolts. While tightening the bolts, you can step on the sidewall of the tire at the bottom with your foot. Lowering the jack: Tighten each bolt in a diagonal sequence. When changing tires, make sure to do it in a safe and stable place to prevent the car from rolling.
118
Share

Can a driver's license be transferred online?

Driver's licenses cannot be transferred online; you need to go to the vehicle management office to handle the procedure. More details are as follows: 1. According to Article 58 of the "Regulations on the Application and Use of Motor Vehicle Driver's Licenses": If a motor vehicle driver's household registration is transferred out of the jurisdiction of the original vehicle management office, the driver should apply for a replacement license at the vehicle management office of the new location. If a motor vehicle driver resides outside the jurisdiction of the issuing vehicle management office, they can apply for a replacement license at the vehicle management office of their residence. When applying, the driver should fill out an application form, submit their identity proof and motor vehicle driver's license, and declare their physical condition. 2. Article 61 of the "Regulations on the Application and Use of Motor Vehicle Driver's Licenses": If a motor vehicle driver's physical condition changes and no longer meets the requirements for the permitted vehicle type of their current driver's license but meets the requirements for other permitted vehicle types, they should apply to reduce the permitted vehicle type at the issuing vehicle management office or another vehicle management office within 30 days. When applying, the driver should fill out an application form and submit their identity proof, motor vehicle driver's license, and a medical certificate issued by a county-level or higher medical institution or a military medical institution at the regiment level or above.
110
Share

How to Check the Production Date of Linglong Tires?

On the outer side of Linglong tires, specifically where the yellow dot is marked, there is a set of four-digit vulcanization numbers that indicate the production date. This number consists of four digits in the format "AABB". The first two digits "AA" represent the week of the year, while the last two digits "BB" indicate the year. Below is more information about Linglong tires: 1. How to Identify Fake Linglong Tires: In terms of tread patterns, counterfeit retreaded tires are usually processed irregularly, resulting in relatively shallow grooves. In terms of color, fake retreaded tires appear brighter and more glossy, whereas genuine ones are relatively darker. 2. Explanation of the Linglong Brand: The logo design of Linglong Tires originates from the geographical name "Linglong Mountain", which is the mountain with the largest gold reserves in Zhaoyuan City, known as the "Gold Capital of China". The company is located in front of Linglong Mountain, drawing inspiration from the mountain's grandeur to express the company's ambition. 3. Meaning of the Brand Logo: The logo features a stylized variation of the English abbreviation of "Linglong", with the Chinese name and an oval forming the main image of the logo. The contrast in oval sizes creates a harmonious and dynamic foundation, symbolizing the company's professional technology and public-oriented services. The overall design is light and dynamic, reflecting the company's steady operation and flexible adaptability in the competitive industry.
103
Share

Can National 5 Vehicles Apply for an Upgrade to National 6?

Technically, upgrading the three-way catalytic converter and the engine ECU logic can improve the vehicle's emission standards, allowing it to pass the National 6 environmental test. While theoretically feasible, this practice violates relevant regulations in reality. If the vehicle has already been registered, unauthorized modifications will result in failure during subsequent annual inspections. For newly purchased National 5 vehicles, such modifications will be detected during the registration process, affecting the vehicle's license plate and other related matters. During production or import, vehicles must comply with national certification standards, and their final emission standards must be reported and approved before they are allowed on the road. Additionally, these strict standards set a lifetime benchmark for motor vehicles, prohibiting any modifications under any circumstances.
113
Share

Where is the BMW X3 air pump located?

The BMW X3 air pump is located under the rear seat, inside the fuel tank. To access it, lift the rear seat of the car: After lifting the rear seat, use a screwdriver to pry open the fuel pump cover plate. Gently pry the clips with a screwdriver: Use a screwdriver to gently pry the clips on the side of the wiring harness, then remove the wiring harness connector and disconnect the two fuel lines. A small amount of fuel may leak out, but the quantity is minimal. Remove the sealing cover and replace the fuel pump gasket: Use a specialized large tool for the pump cover to remove the sealing cover and replace the fuel pump gasket. Remove the fuel pump assembly: Gently remove the fuel pump assembly from the fuel tank and place it in a prepared container.
113
Share

Chery A3 rear door window won't come down after being rolled up?

There are several possible reasons why the rear door window of a Chery A3 won't come down after being rolled up: Check for foreign objects in the window track: Consider whether debris or impurities have entered the internal window track. Accumulated debris can cause sticking. Clean it promptly. Check for residue: Examine if there's any residue on the glass preventing it from rolling down, such as thick bird droppings. Excessive sticky substances can also hinder window movement. Inspect the motor: If the window won't roll up when pressing the button, listen for abnormal sounds. If there's noise inside the door panel, the window regulator motor might be damaged. It's recommended to visit an auto repair shop for inspection.
102
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.