Where is the vehicle with the 'Yu' license plate from?

What Are the Causes of Car Air Conditioning Compressor Failure?

Car air conditioning not blowing air can be caused by blower motor failure, clogged air filter, or control system malfunction. Car air conditioning refrigeration system: consists of compressor, condenser, receiver-drier, expansion valve, evaporator, and blower motor, etc. These components are connected by copper pipes and high-pressure rubber hoses to form a sealed system. When the refrigeration system operates, refrigerant circulates in different states within this sealed system. Blower motor failure: The car blower motor is a crucial component for air conditioning airflow. If the air conditioning compressor fails during operation, the car air conditioning will definitely not blow air. Overheating damage to the internal coil or capacitor failure are significant causes of blower motor failure. You can turn the car air conditioning to maximum and listen for the blower motor sound. Clogged air filter: A clogged air filter is a common and major reason for air conditioning not blowing air. During operation, the car air conditioning absorbs many impurities from the air, leading to filter clogging. If the air conditioning stops blowing air, you can remove the air filter to check if it's clean. Control system malfunction: If neither the blower motor nor the air filter is causing the air conditioning to stop blowing air, then the issue might be with the air door, air conditioning computer, or control switch. Control system switches generally don't fail easily.

15

0

Share

How Long After the Car Overheats Can the Radiator Cap Be Opened?

The radiator cap should only be opened using a safe method more than 15 minutes after the car has been parked. The working principle of the radiator cap is that when the car is running, the coolant temperature rises, increasing the pressure inside the radiator. When the pressure reaches a certain level, the pressure valve is pushed open, allowing the coolant to flow into the adjacent overflow tank. Then, when the car stops running and cools down, the vacuum in the cooling system draws the coolant back from the overflow tank into the radiator. Here is some relevant information about car overheating: Handling method: Avoid turning off the engine immediately when the water temperature is high. When the car's water temperature is too high, the cooling system's water pump is driven by the engine. Turning off the engine stops the pump, preventing the coolant from continuing to circulate. At this time, all parts of the engine remain at high temperatures, and if they are not effectively cooled, the engine may be damaged. Precautions: A triangular warning sign must be placed after parking. If the car "boils over" on the road, remember to place a triangular warning sign 50-100 meters behind the car after parking on the roadside to alert oncoming vehicles to avoid it. On highways, the placement distance of the warning sign should be increased to at least 150 meters.

17

5

Share

Can Blind Spot Monitoring Be Installed Afterwards?

Blind spot monitoring can be installed afterwards. When changing lanes, if there is a vehicle approaching from behind, the blind spot monitoring system will alert the driver to ensure safe lane changing. However, it's important to note that blind spot monitoring is only a warning device and cannot assist in completing the lane change maneuver. Blind spot monitoring can also be referred to as blind spot detection. This system typically consists of hidden sensors in the rear of the vehicle and indicator lights at the base of the A-pillar or other methods to alert the driver of approaching vehicles from behind. For both novice drivers and even experienced ones, due to vehicle design limitations, the visual range provided by side mirrors always has some blind spots. Since drivers cannot constantly turn their heads (which would actually increase driving danger), the blind spot monitoring system was developed.

11

2

Share

What are the differences between Emgrand and Vision?

Emgrand and Vision differ in the following aspects: 1. Body dimensions: The Emgrand measures 4632mm in length, 1789mm in width, 1470mm in height, with a wheelbase of 2650mm. The Vision measures 4599mm in length, 1747mm in width, 1482mm in height, with a wheelbase of 2615mm. 2. Powertrain differences: The new Emgrand is equipped with a 1.3T GeTec DVVT turbocharged engine, featuring front-wheel drive, with a maximum power output of 98kW. The turbo engages at 1800 rpm, delivering a peak torque of 185Nm at 2000 rpm. The new Vision comes with a 1.5L DVVT high-efficiency engine, which utilizes DVVT intelligent continuous variable valve timing technology for both intake and exhaust. It delivers a maximum power of 80kW and a peak torque of 140Nm at 4400 rpm, paired with either a reliable 5-speed manual transmission or an intelligent automatic transmission. 3. Distinct characteristics: The Emgrand embodies the brand values of excellence, stability, and prestige, representing Geely's development direction in safety, energy efficiency, and environmental protection. The Vision features Geely's family-style design language, including the signature water ripple grille, complemented by a blade-style hood and a shark-mouth lower grille.

6

4

Share

Is a Car Sunshade Mat Necessary?

Car sunshade mats are necessary as they prevent direct sunlight from hitting the dashboard and also reduce glare from the dashboard that could impair the driver's vision. Precautions for using sunshade mats: 1. Some dashboards are made of soft plastic, and using a sunshade mat with low-quality adhesive may cause corrosion. It is advisable to purchase genuine sunshade mats. 2. If the sunshade mat emits an odor after prolonged exposure to sunlight, it may be a substandard product and should be replaced immediately. 3. Choose a sunshade mat specifically designed for your car model, ensuring that necessary gaps are maintained to avoid interfering with airbag deployment.

20

0

Share

What are the benefits of waxing a vehicle?

The benefits of waxing a vehicle include: 1. Regular waxing makes it difficult for rainwater to adhere to the car's surface, preventing acid rain from corroding the paint; 2. The thin layer formed by waxing reflects light, avoiding paint aging; 3. Waxing prevents the generation of static electricity and reduces the attachment of charged dust to the car; 4. It has a polishing effect, enhancing the brightness of the paint and making the car appear newer. There are various types of car wax on the market, including solid and liquid forms, with different qualities and performances. Each type of wax has different effects and outcomes, so it is essential to choose carefully. Improper selection may not only fail to protect the vehicle but could also cause the paint to discolor.

15

2

Share

Where is the vehicle with the 'Yu' license plate from?

What Are the Causes of Car Air Conditioning Compressor Failure?

How Long After the Car Overheats Can the Radiator Cap Be Opened?

Can Blind Spot Monitoring Be Installed Afterwards?

What are the differences between Emgrand and Vision?

Is a Car Sunshade Mat Necessary?

What are the benefits of waxing a vehicle?

What Causes a Car to Fail to Start and Make a Buzzing Sound?

What are the differences between the Touareg and the Teramont?

What is the positioning of the Tiguan L model?

What to Do When the Luxgen Trunk Won't Open?