···
Log in / Register

Where is the USB port located in the old model Besturn B50?

6Answers
EllieDella
07/28/2025, 06:33:22 AM

The USB port in the old model Besturn B50 is located inside the sunglasses compartment below the left side of the steering wheel. Functions of the car USB port: The USB port in a car can be used for playing music from a USB flash drive, charging mobile phones and MP3 players, serving as a USB car cigarette lighter port, functioning as an interface for radar detectors and dash cams, and charging laptops and tablets. It utilizes the car's standard power supply to charge 5V DC devices via the USB interface or serves as a fixed power supply port for electrical appliances. USB working principle: The in-car power supply converts 12V DC or 24V DC to 5V DC, then uses the standardized USB interface to transfer the 5V DC output to charge corresponding devices. Since different devices have varying power requirements, the power output of USB car chargers also varies significantly, primarily distinguished by the current capacity of the USB car charger.

Was this review help?
118
Share
SanLuke
08/11/2025, 12:08:30 PM

I've been driving an older model Besturn B50 for several years, and the USB port is located inside the glove compartment on the passenger side. You'll need to open the lid to find it. Generally, it's positioned at the top left corner or the right side of the inner wall, somewhat hidden, but designed there to prevent data cables from dangling and obstructing the view while driving. In my car, when plugging in a USB drive or connecting a phone via Bluetooth, it only supports music playback or charging. The port is USB 2.0, not particularly fast but sufficient. If you can't locate it, I suggest carefully checking the corners of the glove compartment or seeing if there's a small flap under the center console that can be opened. In older cars, sometimes the port might be loose or blocked by clutter, so it's best to clean the area and try again. If you still can't find it, your car might not have this port as standard—older models varied in configuration, and you may need to install an adapter, which costs just a few dozen bucks at a repair shop. Always operate when parked safely to avoid distractions while driving.

Was this review help?
12
Share
Expand All
OElisa
09/28/2025, 12:48:45 AM

As a car detail enthusiast, I noticed that the USB port in the old Besturn B50 is hidden inside the glove compartment on the passenger side—a rather classic placement that prevents dust from entering the port and protects the wiring. Looking back, early models were designed this way because the multimedia system was integrated into the passenger area, and the USB was mainly used to connect CD players or external devices. I’ve compared similar layouts in some Japanese cars, like the older Toyota Corolla, which also placed it inside the glove box or under the center armrest. If you wanted to listen to music while driving, you’d have to stop, open the compartment, and connect your phone or USB drive first—otherwise, there’d be no signal. Nowadays, using Bluetooth headphones is a better option. If you can’t find it, don’t panic—check if there’s an opening in the glove compartment lining, as it might be covered by clutter. I recommend regular cleaning and maintenance of the port to prevent oxidation and malfunction.

Was this review help?
4
Share
Expand All
MakaylaLee
11/11/2025, 01:42:29 AM

When I go out with my old Besturn B50, the USB port is right inside the glove compartment on the passenger side—it's easy to overlook if you don't look carefully. I remember the first time I used it; I fumbled around for a while before finding the small port tucked in the corner of the compartment. Just plug in a cable, and you can charge your phone or play music—pretty convenient. If you can't find it while driving, pull over and take a proper look; it's common for clutter to block the way. The port design is simple and user-friendly, but don't forget safety comes first.

Was this review help?
17
Share
Expand All
VivienneDella
01/01/2026, 03:29:11 AM

In my opinion, the USB port of the old Besturn B50 is located inside the glove compartment on the passenger side, a design intended for convenient connection to the vehicle's host control system. The USB port supports basic data transfer and charging functions, but with limited speed—older cars often only provide 1A current output. Before driving, check if the port is securely fixed, as a loose USB drive connection may cause unresponsiveness. If you can't find it, try other storage areas such as behind the center armrest cover. Overall, it makes music playback more convenient, but maintaining the port properly can extend its service life.

Was this review help?
20
Share
Expand All
DiSpencer
03/29/2026, 04:42:34 AM

Based on experience with the older Besturn B50, the USB port is commonly located deep inside the glove compartment on the passenger side. I usually connect my USB drive or data cable before driving; the position is slightly concealed but easy to operate. If you can't find it, don't panic—check the base of the glove compartment or pull out the inner lining. The port may become unresponsive due to aging, so regularly clean dust with a cotton swab to prevent malfunctions. Adding a converter for extended use is recommended.

Was this review help?
11
Share
Expand All
More Q&A

What Causes Car Jerking at Low Speed but Normal at High Speed?

Car jerking at low speed but normal at high speed reasons: Engine oil passage blockage: First, attention should be focused on the engine. If the car experiences jerking while driving, the engine is certainly involved. The engine's ignition, air intake, and fuel injectors collectively determine fuel combustion, which is also the power source of the engine. If the air intake decreases, ignition weakens, or fuel injection reduces, the power will be insufficient, resulting in a jerking sensation. Transmission oil contamination causing solenoid valve damage: If sludge in the transmission oil circulates within the transmission and blocks the oil passages in the valve body, jerking issues will arise. Over time, this can lead to a series of transmission problems such as overheating, impact, and slipping.
112
Share

How to Activate Cruise Control on Volkswagen Magotan?

Method to activate cruise control on Volkswagen Magotan: There is a button on the left side of the multifunction steering wheel with a speedometer icon, which is the cruise control switch. Press this button to activate the cruise control system, then press the set button to store the current speed. At this point, the vehicle will maintain the stored speed. The Magotan is a B-class sedan under the Volkswagen brand, equipped with three engine options: a 1.4L turbocharged engine, a low-power 2.0L turbocharged engine, and a high-power 2.0L turbocharged engine. In terms of exterior design, the Volkswagen Magotan showcases a stylish and sophisticated design language. Its refined appearance features full LED headlights that align with the brand's latest design trends, seamlessly integrated with the large central grille for a cohesive look. The three horizontal chrome trim strips add a sharp and dynamic touch to the front fascia.
107
Share

What is the tire size for the Golf?

The Golf has two tire sizes: 205/55R16 and 225/45R17. The Volkswagen Golf uses Hankook tires, which primarily cater to small cars and compact vehicles. Hankook mainly produces radial tires, and this brand employs run-flat tire technology, allowing the tires to continue driving even without air pressure. In terms of exterior design, the Golf's innovative roofline contour fully embodies the robust character of the new Golf, while the sharp angular waistline visually lowers the vehicle's center of gravity. Under the hood, the Golf is equipped with EA211 series 1.6L and 1.4T engines. The 1.6L engine delivers a maximum power of 81 kW and a maximum torque of 155 Nm, paired with a 5-speed manual or 6-speed automatic transmission.
104
Share

What is the actual fuel consumption of the Geely Boyue?

Geely Boyue's fuel consumption is 6.4-7.7L/100km. The following is relevant content introduction: 1. Body dimensions: The body dimensions are: length 4519mm, width 1831mm, height 1694mm, wheelbase 2670mm, and curb weight 1575kg. 2. Configuration: Taking the 2021 Geely Boyue as an example, it belongs to the compact SUV category with a 5-door, 5-seat SUV body structure. The front suspension is MacPherson independent suspension, and the rear suspension is multi-link independent suspension. It is equipped with a 1.8L turbocharged engine with a maximum horsepower of 163PS, maximum power of 120kW, and maximum torque of 250Nm, paired with a 6-speed manual transmission.
114
Share

How to Turn Off the Speed Limiter Function in Mercedes-Benz?

Mercedes-Benz speed limiter deactivation method: 1. On the left side of the steering wheel, there is a slender lever; 2. Push the lever forward to cancel the speed limit; 3. Press the lever to the right to turn off the small yellow light, which will disable the speed limiter. Mercedes-Benz is a luxury and high-performance German automotive brand headquartered in Stuttgart, Germany, and is a member of the Daimler AG group. Purpose of the Mercedes-Benz speed limiter function: Once activated at the driver's desired speed, it automatically maintains the vehicle's speed without requiring the driver to press the accelerator pedal, enabling the car to travel at a constant speed. This feature allows drivers to avoid continuous throttle control during prolonged highway driving, reducing fatigue and unnecessary speed fluctuations while improving fuel efficiency.
120
Share

What are the symptoms of too small valve clearance?

Symptoms of too small valve clearance: The valve components will expand due to heat, causing valve leakage and burning of the valve seat. For deformed or burned valve seats, they must be corrected by reaming and grinding, and cannot be repaired solely by lapping with the valve. Valve seats that cannot be repaired should be replaced with new ones. The repaired or replaced seat must be coaxial with the guide hole, with a coaxiality error of less than 0.03 mm. When the engine is running, the valve will expand due to the increase in temperature. If there is no clearance or too little clearance between the valve and its transmission components in the cold state, the thermal expansion of the valve and its transmission components in the hot state will inevitably cause the valve to not close tightly, resulting in air leakage during the compression and power strokes, thereby reducing power. In severe cases, it may even be difficult to start. To eliminate this phenomenon, a certain clearance is usually left between the valve and its transmission mechanism during cold assembly of the engine to compensate for the expansion of the valve after heating.
101
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.