···
Log in / Register

What is the time limit for completing the Subject 2 driving test?

1Answers
VanKylie
09/04/2025, 04:22:10 AM

There is no overall time limit for the Subject 2 driving test, but individual test items have specified completion times. For the reversing test item, the time limit for completing the reverse parking starts when the reverse gear is engaged and must not exceed 210 seconds; otherwise, the test will be deemed as failed. The time limit for the parallel parking test item must not exceed 90 seconds. For the slope parking and starting test item, the vehicle must start moving uphill within 30 seconds after stopping. Subject 2, also known as the small road test, is the abbreviation for the field driving skills test. Its purpose is to master the basic driving operation essentials, possess the fundamental ability to control the vehicle, proficiently grasp the basic methods of field and in-field road driving, acquire the capability to reasonably use vehicle control components and correctly control the vehicle's spatial position, and accurately control the vehicle's driving position, speed, and route. In most regions, the Subject 2 test items include five components: reverse parking, parallel parking, slope parking and starting, right-angle turns, and curve driving. The newly added test items include four components: simulated tunnel driving, simulated highway card collection, narrow road U-turns, and passing through a width-restricted gate. Some regions have already implemented the new Subject 2 regulations, increasing the number of test items from the original five to nine.

Was this review help?
101
Share
More Q&A

What to Do with Tire Pressure Monitoring When Changing Tires?

When changing tires, the tire pressure monitoring system needs to be reset. The method is as follows: 1. Power on the vehicle; 2. Simultaneously press the lock and unlock buttons on the remote control; 3. Unscrew the tire valve cap and continuously release air until you hear the car horn sound, then stop releasing air; 4. After the tire pressure is reset, inflate the tires in sequence. The tire pressure monitoring system automatically monitors various conditions of the tires in real time by recording the rotation speed of the tires or through electronic sensors installed in the tires, providing effective safety protection for driving. The functions of the tire pressure monitoring system are: 1. To alert the driver in time when there are dangerous signs in the tires, prompting the driver to take corresponding measures to avoid serious accidents; 2. To keep the tires working within the specified pressure and temperature range, reducing tire damage and extending their service life.
111
Share

How to Clean a KN Air Filter?

KN air filter cleaning method is as follows: 1. Tap the intake side of the KN filter to remove loose large particles, then use a brush for further cleaning; 2. Evenly spray KN-specific cleaner on the air filter element; 3. Rinse with low-pressure tap water, ensuring the water flows in the opposite direction of the intake; 4. After rinsing, shake off excess water and allow the KN filter to air dry naturally; 5. After about half an hour of natural drying, evenly apply maintenance oil, and the cleaning process is complete after 20 minutes. The air filter is a type of filter, also known as an air filter cartridge or air cleaner, and should be replaced approximately every six months or 10,000 kilometers.
117
Share

How to Turn on the Right Rear Fog Light of the Vezel?

The method to turn on the right rear fog light of the Vezel is: 1. Locate the light control lever below the left side of the steering wheel; 2. Rotate the light control lever to the rear fog light position to turn it on. The rear fog light is the fog light located at the rear of the car, and its purpose is to make the vehicle visible to other vehicles in conditions of reduced visibility, such as foggy or rainy weather. Taking the 2020 Vezel as an example, its body dimensions are: length 4328mm, width 1772mm, height 1605mm, wheelbase 2610mm, fuel tank capacity 50l, luggage capacity 437 to 1456l, and the body structure is a 5-door, 5-seat SUV.
106
Share

What Causes the Engine Noise to Increase?

Car engine noise increases due to the following reasons: 1. The engine oil does not meet the standard or is overfilled, increasing the stirring resistance of the crankshaft connecting rod; 2. The viscosity of the engine oil is unsuitable; 3. Excessive carbon deposits in the engine, which aggravate the wear of the cylinder and piston; 4. Mixing different brands of engine oil; 5. Not changing the engine oil on time. An engine is a machine that can convert other forms of energy into mechanical energy. It is divided into: 1. Internal combustion engine: Fuel burns inside the engine; 2. External combustion engine: Fuel burns outside the engine; 3. Gas turbine: Combustion produces high-pressure gas, and the high-pressure gas is used to push the turbine blades to rotate; 4. Jet engine: An engine that directly generates reactive thrust by the high-speed airflow ejected from the nozzle.
115
Share

Which country does Renault belong to?

Renault is a French automobile manufacturer, and its models include the Koleos, Kadjar, Captur, and Espace. Taking the 2019 Koleos as an example, its body dimensions are: length 4672mm, width 1843mm, height 1717mm, with a wheelbase of 2705mm, a fuel tank capacity of 57 liters, and a body structure of a 5-door, 5-seat SUV. The 2019 Koleos is equipped with a 2.0L naturally aspirated engine, with a maximum power of 137kW and a maximum torque of 246Nm, paired with a CVT continuously variable transmission. It features a front suspension type of MacPherson independent suspension and a rear suspension type of multi-link independent suspension.
111
Share

Why does the time on the Peugeot 307 keep flashing?

The reason why the time on the Peugeot 307 keeps flashing is: the car battery is dead or there is poor contact in the wiring harness. The Peugeot 307 is a compact 5-door, 5-seat hatchback with body dimensions of: length 4212 mm, width 1762 mm, height 1531 mm, a wheelbase of 2608 mm, and a fuel tank capacity of 60 liters. The Peugeot 307 is equipped with a 1.6L naturally aspirated engine, with a maximum power of 86 kW and a maximum torque of 150 Nm. It is paired with a 5-speed manual transmission, adopts a front-engine, front-wheel-drive layout, uses MacPherson independent suspension at the front, and a deformable crossbeam type with a stabilizer bar at the rear.
112
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.