···
Log in / Register

What National Emission Standard Does the Changan Oushang X70A Comply With?

6Answers
McOmar
09/02/2025, 11:40:18 PM

All four currently available models of the Changan Oushang X70A comply with the China VI emission standard, meeting the latest national emission requirements. The Changan Oushang X70A is positioned as a 5-door, 7-seater compact SUV with body dimensions of 4620/1770/1820 mm and a wheelbase of 2750 mm. The entire lineup is equipped with a 1.5L naturally aspirated engine, delivering a maximum power of 79 kW (107 PS) and a maximum torque of 145 Nm, paired with a 5-speed manual transmission. It features a front-engine, rear-wheel-drive layout with a MacPherson front suspension and a spiral spring non-independent rear suspension, utilizing a unibody construction. Standard equipment across the range includes tire pressure monitoring, a monochrome trip computer display, foldable rear seats, halogen headlights, and manual air conditioning. China implemented the China VI emission standard starting from July 1, 2020. Compared to the China V standard, the China VI standard reduces carbon monoxide emissions from gasoline vehicles by 50%, lowers the emission limits for total hydrocarbons and non-methane hydrocarbons by 50%, and tightens nitrogen oxide emission limits by 42%. This emission standard has comprehensively surpassed European emission standards. Owners can verify whether their vehicle meets the China VI standard by checking the factory certificate and the vehicle's environmental protection information list, or by logging onto the official vehicle environmental protection website for related information.

Was this review help?
120
Share
ElianaLee
09/15/2025, 01:18:01 AM

I'm a car enthusiast who frequents forums researching various models. The Changan Oushang X70A SUV, based on my research, mainly complies with the China 5 emission standard, meaning its exhaust emissions are at a moderate level—not the latest but still acceptable. The China 5 standard requires significantly lower emissions of harmful gases like nitrogen oxides and particulate matter compared to China 4, so driving it in the city won't heavily pollute the air. I recall most of these vehicles were produced between 2017 and 2019 when China 5 was the mainstream standard. If you're curious, newer versions might have been updated to China 6, but you'd need to check the VIN or manual to confirm. Emission standards affect annual inspections and registration, but China 5 vehicles can generally operate normally in most regions, offering cost savings and peace of mind. Just keep an eye on policy changes in cities with driving restrictions. Overall, this car is well-suited for daily driving.

Was this review help?
7
Share
Expand All
MartinAnn
10/29/2025, 01:57:18 AM

Over the past decade in auto repair, I've handled numerous maintenance cases involving the Changan Oushang X70A. This vehicle generally complies with the China 5 emission standards, with a relatively reliable exhaust system design, commonly seen in models around 2018. Emission standards reflect a vehicle's environmental performance, where China 5 indicates that the control of harmful substances in exhaust emissions meets requirements without exceeding limits, thus avoiding issues during annual inspections. In actual driving, emissions may deteriorate if maintenance is neglected, so I remind owners to regularly check engine oil and air filters to maintain engine efficiency. Compared to China 6 vehicles, China 5 models are slightly older but offer lower costs and reasonable fuel expenses. If new owners are uncertain, they can simply refer to the environmental compliance sticker or registration certificate—no need for unnecessary worry.

Was this review help?
11
Share
Expand All
RoseLee
12/12/2025, 01:09:08 AM

Our family has owned a Changan Oushang X70A, which we used as a regular family car for several years. We initially chose it because it met the China V emission standard, which is a moderate environmental level with cleaner exhaust, and we never encountered any issues during vehicle inspections. Driving a China V car in the city is relatively quiet, fuel-efficient, and cost-effective. Environmentally, it's much better than older vehicles, reducing pollution without being as strict as the China VI standard. Just make sure to maintain the engine and exhaust system regularly to prevent carbon buildup from affecting performance. When buying a used car, check the production year carefully—most models from 2017 to 2019 are China V compliant.

Was this review help?
14
Share
Expand All
MariaRose
02/01/2026, 02:20:24 AM

As an environmentally conscious individual, I place great importance on a vehicle's emission performance. The Changan Oushang X70A generally meets the China V emission standards, which I know clearly because I've researched the relevant data. The China V exhaust treatment reduces carbon monoxide and particulate emissions, contributing to improved air quality. It's more environmentally friendly than China IV standards but slightly inferior to China VI. In reality, driving this vehicle in urban areas can help reduce some pollution pressure. Emission standards affect a vehicle's service life and drivable regions, and China V vehicles can be used in most areas for many years. I recommend potential buyers prioritize Changan models with China VI or higher standards, but the existing China V version remains a reasonable choice. Remember to maintain the catalytic converter properly to extend its environmental benefits.

Was this review help?
5
Share
Expand All
CassidyLee
04/27/2026, 12:30:45 PM

Having sold multiple models under the Changan brand, I'm well aware of the emission status of the Changan Oushang X70A. Most variants comply with the China V standard, with exhaust emissions controlled within reasonable limits to meet current environmental regulations. This offers significant benefits to owners: simplified license plate registration, high annual inspection pass rates, and reduced daily operating costs. Compared to China VI vehicles, China V engines demonstrate stable efficiency and better fuel economy. If you're considering a vehicle from around 2018, it's almost certainly China V compliant. In terms of driving experience, higher emission standards ensure cleaner operation and reduced environmental impact. When selecting, it's best to physically inspect the vehicle's identification plate to avoid discrepancies.

Was this review help?
5
Share
Expand All
More Q&A

What are the disadvantages of aftermarket catalytic converters?

The disadvantages of aftermarket catalytic converters include: The performance of aftermarket catalytic converters may not be as effective as the original ones, leading to non-compliant exhaust emissions; Unlike original catalytic converters produced by the car manufacturer, aftermarket ones may lack relevant certifications or quality assurances; The quality of aftermarket catalytic converters varies greatly, often resulting in a shorter lifespan. More details are as follows: 1. The operating temperature of a catalytic converter typically should not exceed 800°C: However, if the engine's cylinder combustion is poor (a common occurrence, such as with faulty spark plugs or high-voltage lines), the exhaust will contain excessive unburned fuel gases. These gases can combust inside the exhaust manifold, causing the catalytic converter to fail or be damaged due to excessively high temperatures. 2. The hazards of tetraethyl lead: Tetraethyl lead in leaded gasoline not only causes significant pollution and harm to the environment and human health but also deposits on the active surfaces of the oxygen sensor and catalytic converter within the catalytic converter. This leads to 'lead poisoning' of the oxygen sensor and greatly reduces the purification efficiency of the catalytic converter, eventually causing damage. Therefore, the quality of gasoline has a significant impact on the performance of the catalytic converter.
105
Share

What brand is Victra tires?

Victra is a series of tire products under Maxxis tires. Maxxis is one of the brands under Cheng Shin Rubber Industry Co., Ltd., a Taiwanese company established in 1967. Maxxis International continuously provides high-quality tire products for passenger cars, light trucks, bicycles, motorcycles, ATVs, trailers, go-karts, and lawn mowers. For Victra tires in daily use, pay attention to the following points: Regularly check the tire surface for cracks, deformations, and other defects. Due to driving wear, the tread grooves of the tire gradually become shallow. If the tread is worn flat, it will lose its drainage and anti-slip functions, significantly reducing the vehicle's performance. Small cracks may seem minor but can be a hidden danger for tire blowouts at high speeds. Additionally, promptly remove pebbles from the grooves. Park on level ground whenever possible. Avoid parking on roads with thick, sharp, or pointed stones. Do not park the vehicle near or in contact with petroleum products, acids, or other materials related to rubber deterioration. After parking, the driver should not turn the steering wheel, as this operation accelerates tire wear. Do not splash water to cool down. In hot weather or during high-speed driving, tires are prone to overheating, and the air pressure increases. In such cases, stop to allow the tires to cool naturally. Never release air to reduce pressure or splash water to cool down, as this can cause abnormal aging of the tread rubber. Avoid sudden braking. Try to minimize frequent use of brakes and sudden stops to prevent accelerated tread wear caused by dragging between the tires and the ground.
109
Share

What is the Structure of a Car Door Lock?

The structure of a car door lock includes the following: 1. Large Carrier: The large carrier is the main component that drives the movement of the large latch. Hangzhou Lock Company is the main body for installing the large latch. The head of the large carrier is the riveting part for the large latch, the middle rectangular hole can cooperate with the lug on the pull plate, the outer step is the slot for the brake plate to snap into, and the lower part can snap into the slider clamp, facilitating the pulling of the slider. At the same time, when the large carrier is pushed inward, it is not obstructed by the slider clamp. 2. Small Carrier: The small carrier is the main body for installing the small latch and is the primary component controlling the self-locking of the large latch. The head of the small carrier is used to assemble the small latch, and the protruding triangular part in the middle is used to push the brake plate to eliminate the self-locking of the brake plate on the large carrier. 3. Pull Plate: The pull plate serves to position and release the self-locking when the large latch is pulled inward. The lug at the top of the pull plate can be inserted into the rectangular hole in the middle of the large carrier, allowing it to pull the large carrier inward together, and also enabling it to slide within the rectangular hole when the large carrier is pushed inward. The supporting corners on both sides of the pull plate can move the brake plate to release the self-locking of the brake plate on the large carrier. The small circle in the middle of the pull plate is used for its own positioning, and the protrusions on both sides allow the large carrier to move within the formed groove. The lower snap can fit into the slider clamp, moving under the control of the slider.
109
Share

What does the white dashed line on the right edge of the lane mean?

The white dashed line on the right edge of the lane indicates that vehicles may temporarily cross the line for lane changes or turning. Below is an explanation of the meanings of various road markings: 1. White dashed line: When marked on road sections, it separates traffic moving in the same direction; when marked at intersections, it guides vehicle movement. 2. White solid line: When marked on road sections, it separates motor vehicles and non-motor vehicles moving in the same direction or indicates the edge of the lane; when marked at intersections, it serves as a guide lane line, stop line, or directs vehicle movement; when used as parking space markings, it indicates paid parking spaces.
119
Share

What Causes Severe Vibration When the Car Air Conditioner is On?

Severe vibration when the car air conditioner is on can be caused by the following reasons: 1. Dirty throttle body: This affects the engine. If the air conditioner is turned on at this time, it will increase the engine idle load, resulting in steering wheel vibration. 2. Throttle carbon buildup: If the throttle body has not been maintained for a long time, carbon deposits can easily form, obstructing engine air intake. This causes the engine to struggle or barely power the compressor, leading to idle vibration. The solution is to clean the throttle body. If driving conditions are harsh, regular cleaning is recommended, preferably every 10,000 kilometers.
102
Share

Which brand of car tires are wear-resistant with low noise?

Every brand has quiet tires. However, wear-resistant tires are definitely harder, and harder tires tend to produce more road noise. It's hard to achieve both quietness and wear resistance, but car owners can choose a tire that strikes a better balance between quietness and comfort. Here are two wear-resistant tires with relatively low noise: 1. Goodyear's TripleMax: The TripleMax is a tire that combines comfort, quietness, handling, and wear resistance, making it one of Goodyear's most outstanding tires in terms of overall performance. The rubber padding effectively reduces noise, while the sturdy shoulder enhances handling performance and extends tire life. 2. Michelin ENERGY-XM2 (Tough Grip): Primarily designed for small and medium-sized sedans. Specially designed for Chinese road conditions, its advantages include safety, durability, and long mileage. It also features fuel-saving capabilities while maintaining comfort and quietness.
120
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.