···
Log in / Register

Differences between the Avancier 240 and 370?

6Answers
OMaddox
09/03/2025, 02:14:14 AM

The main differences between the Avancier 240 and 370 lie in the car's exterior, engine power, and transmission. The specific details are as follows: 1. The Avancier is a classic SUV model under Honda's brand, positioned as a mid-to-large-sized SUV. 2. Avancier 240 version: Equipped with a 1.5T engine, the 1.5T+CVT powertrain includes features such as direct fuel injection, high-response turbocharging, dual exhaust, and dual VTC. The engine's maximum power is 142kw, with a maximum torque of 243 Nm. 3. Avancier 370 version: This version has stronger power compared to the 240 version, but the 370 version's car body is 50 kg heavier than the 240 version. This model adopts a 2.0T+9AT powertrain combination, providing ample power.

Was this review help?
111
Share
Adams
09/15/2025, 03:41:54 AM

Hey, I've driven both of these cars, and as a car enthusiast, I feel the power difference is huge: The Avancier 240 comes with a 1.5L turbocharged engine, which is easy to drive but feels sluggish during acceleration; the Avancier 370 is equipped with a 2.0L engine, delivering nearly 300 horsepower with strong acceleration and stable overtaking on highways. When I test-drove the 370 in sport mode, the response was incredibly quick, though the fuel consumption is indeed higher, averaging around 10L, while the 240 is much more fuel-efficient at about 8L. The 240 is sufficient for city driving, but if you're looking for a thrilling drive, the 370 is much more satisfying. Both models have the same spacious interior, but the 370 adds features like a panoramic sunroof and sport seats. The overall driving experience is noticeably different, making the 370 a better choice for those who love excitement.

Was this review help?
16
Share
Expand All
EmilianoLee
10/29/2025, 04:20:51 AM

As a stay-at-home dad with frequent school runs, the Avancier 240 is perfect for me: its smaller engine saves fuel, averaging 8L in the city, cutting costs significantly. The space is just as spacious as the 370, comfortably seating the whole family. In contrast, the 370 offers stronger power but fuel consumption surges above 10L, making it unsuitable for daily commutes. Both models have the same basic safety features like airbags, but the 240 starts at a lower price by 10-20K, and the 370's extra power is unnecessary. I often drive my wife to the supermarket, and the 240 is easy to park and economical, while the 370's extra power is wasted in the city. Long-term, the 240 is cheaper to maintain and more reliable, saving money for the kids' snacks.

Was this review help?
20
Share
Expand All
SiennaRose
12/12/2025, 03:32:30 AM

As a car enthusiast, I study engine differences: the Avancier 240 is equipped with a 1.5T engine producing 193 horsepower, while the Avancier 370 uses a 2.0T engine with up to 272 horsepower, a power difference of 70-80%. On the road, the 370 accelerates faster with earlier turbo engagement, delivering noticeable push-back sensation, but the 240 is more economical and smooth with 20% lower fuel consumption. The 240 mostly pairs with a CVT transmission for fuel efficiency, while the 370 comes with a 9AT for sharper handling. Both models have solid chassis and decent noise insulation, but the 370 is more suited for high-speed driving. I really enjoy analyzing these technical details in my daily life.

Was this review help?
15
Share
Expand All
Graham
02/01/2026, 09:47:44 PM

As a working woman, choosing the Crown Road 240 for daily commuting is really wise: lightweight and agile, fuel-efficient and comfortable in the city, without pursuing high horsepower. My friend drives the 370 and finds it powerful but with higher fuel consumption and more noise; my model's configuration is basically sufficient, features like air-conditioned seats might be upgraded in the 370, but the price difference is significant. For city traffic jams, the 240 is more than enough and easier to park, while the 370 accelerates faster for longer trips but consumes more fuel, which isn't cost-effective. Choosing a car depends on your needs, and I suggest all women try it out first.

Was this review help?
17
Share
Expand All
VonLaila
04/27/2026, 02:46:31 PM

As a budget-conscious buyer, comparing the Guan Dao 240 and 370: the price difference is around 50,000 yuan. The 240 starts at 200,000 yuan, offering fuel efficiency and economy, while the 370 costs about 250,000 yuan with stronger power and more features. Needs determine everything: if you frequently drive on highways, the 370 provides smooth acceleration and stability on mountain roads; but for city commuting, the 240's 8L/100km fuel consumption saves you thousands in annual fuel costs, making it a great deal. Maintenance costs are similar, and both are reliable, though the 370's larger engine makes upkeep slightly more expensive. It depends on personal preference—I prefer the practicality and cost-effectiveness of the 240.

Was this review help?
15
Share
Expand All
More Q&A

How to Turn Off the Civic's Remote Start?

Using the remote control system on the smart key, you can remotely turn off the engine. If the engine idles for an extended period while running, it will automatically shut off. Below is some relevant information: 1. Exterior Design: The ninth-generation Civic shares a similar body design with its North American counterpart. However, to cater to the aesthetic preferences of Chinese consumers, the ninth-generation Civic features chrome accents around the front grille and fog lights, enhancing its premium feel. Additionally, the central section of the front bumper adopts a mesh design, which gives it a more sporty appearance compared to the horizontal bar styling of the North American model. 2. Powertrain: The ninth-generation CIVIC (Civic) fully unleashes the advanced i-VTEC engine, showcasing its many highlights. As a globally renowned engine, the i-VTEC has been refined through track testing and further improvements, delivering superior power and lower fuel consumption. With cutting-edge technology, the engine optimally distributes dynamic power between the front and rear wheels, ensuring precise transmission for excellent traction and grip performance, thereby maximizing the utilization of power.
118
Share

What Causes the ABS Light to Appear on the Dashboard?

ABS light can illuminate in various states, and different states have different causes and solutions. The details are as follows: State 1: ABS warning light stays on (most common). Cause 1: The ABS speed sensor's sensing part is covered by dirt, mud, or other contaminants, affecting its ability to detect the corresponding speed signal. This prevents the ABS computer from determining the vehicle speed and wheel slip rate, thus failing to issue appropriate commands to adjust braking. Solution: Clean the dirt from the speed sensor and adjust the gap between the sensor and the signal ring to restore normal function. Cause 2: Poor signal transmission due to loose system wiring connections or poor contact in the ABS relay, leading to system failure. Solution: Check wiring connections and reconnect any loose parts. State 2: ABS warning light intermittently illuminates but turns off during acceleration. Cause: When multiple vehicle electrical devices are in use, the battery voltage drops below 10.5V. The ABS light turns off as the engine speed increases and voltage rises. This may also occur due to insufficient power supply voltage to the ABS system, such as poor terminal contact or grounding issues. Solution: Check the battery's specific gravity, charging system, and power supply (e.g., voltage relay or poor power contact). State 3: ABS warning light stays on after engine start and turns off only when the engine is turned off (IGFF). Cause: Poor grounding contact in the ABS hydraulic valve body; poor contact in the ABS hydraulic valve body wiring connector; ABS computer malfunction. Solution: Loosen and retighten the hydraulic valve body's grounding screw, cleaning the contact surface if necessary. Check for enlarged gaps in the connector; replace the ABS or ABS/ASR computer if needed. State 4: ABS warning light illuminates during high-speed driving. Cause: The ABS computer detects a significant difference between rear and front wheel speeds during high-speed driving; incorrect tire or wheel rim specifications. Solution: Refer to the vehicle's tire and wheel rim specifications, as indicated on the label near the fuel tank cap. State 5: ABS warning light intermittently illuminates. Cause: Improper adjustment of the brake light switch; poor internal contact in the brake light. Solution: With the engine running, press the brake pedal and manually push the brake switch lever down completely, then release the pedal to reset its position. Replace the brake light switch if necessary. If the ABS warning light is on, it is not recommended to continue driving. A lit ABS light indicates a malfunction in the vehicle's anti-lock braking system. During emergency braking, locked wheels can cause the vehicle to skid uncontrollably, preventing the driver from slowing down or adjusting the vehicle's trajectory, posing significant safety risks.
108
Share

Where is the maintenance light reset button for the Maxus G10 business van?

The maintenance light reset button for the Maxus G10 business van is located on the vehicle's steering wheel. Reset precautions: After completing the maintenance light reset operation, if you need to disconnect the battery cable, you must lock the vehicle and wait for at least 5 minutes. Otherwise, the reset will not be recorded by the control unit. Purpose of the maintenance light: As driving time increases, the wear and tear on internal vehicle components gradually intensifies. To ensure normal vehicle operation, manufacturers install reminder indicator lights during production. After reaching a certain mileage, owners must promptly replace components. After successful replacement, the vehicle maintenance light also needs to be reset.
117
Share

What documents are required for vehicle license plate registration?

Documents required for vehicle license plate registration include: 1. Vehicle qualification certificate; 2. Vehicle purchase invoice; 3. Vehicle tax payment certificate; 4. Original ID card of the vehicle owner and a copy; 5. Compulsory traffic insurance policy. The method for installing a license plate is: 1. Take out the license plate screws and insert them into the anti-theft caps by rotating; 2. Position the license plate correctly, align the screws with the gaps on the bumper, and secure them with tools; 3. Cover the anti-theft caps and press them into place. The functions of a license plate are: 1. Identification mark for the vehicle; 2. Indicates the region to which the vehicle belongs; 3. Allows for tracking of the vehicle owner and registration information based on the license plate.
118
Share

Why is the center hump in the rear row of the Lavida relatively high?

The relatively high center hump in the rear row of the Lavida is due to two reasons: first, in front-engine, front-wheel-drive vehicles, that area accommodates the exhaust pipe; second, in front-engine, rear-wheel-drive vehicles, that area accommodates the drive shaft. Here is more information about the Lavida: 1. The comfort of the Lavida actually meets the needs of most families quite well. The suspension is soft, the sound insulation is excellent, and the engine noise heard inside the car is minimal across the entire RPM range. 2. There is a flaw in the powertrain matching because it uses a 1.5-liter naturally aspirated engine. 3. The rear seating space of the Lavida is not particularly large. The rear seat cushions in its previous generation were relatively short, and in this generation, the cushions have been lengthened by 2-3 cm, though visually, the difference is not very noticeable.
119
Share

Why does the fan keep running after the car is turned off?

Vehicle fan keeps running after the engine is turned off because the engine temperature remains too high after parking. The onboard computer automatically calculates the fan speed and duration - the higher the engine temperature, the longer the fan will run to protect the engine. If the fan continues running after the engine temperature has dropped, it might be caused by a poor electrical connection. You can try unplugging the fan wiring harness to cut power separately. The function of the car fan is to increase air flow through the radiator core, enhance cooling efficiency, and accelerate water cooling. Automotive engine fans are classified into axial-flow fans and centrifugal fans by structure principle, and divided into mechanically driven and electrically driven types by driving method.
120
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.