···
Log in / Register

What is the fuel consumption of the Binyue?

6Answers
MacMason
07/29/2025, 07:40:48 PM

The fuel consumption of the Geely Binyue 1.5T model is 6.1L/100km; the Binyue 1.0T model consumes 5.3L/100km. Below are the detailed specifications of the Geely Binyue: 1. Vehicle Positioning: A compact SUV under Geely Auto, with dimensions of 4330mm in length, 1800mm in width, and 1609mm in height, a wheelbase of 2600mm, and a curb weight of 1310kg. 2. Suspension System: The Binyue features a MacPherson strut front suspension and a torsion beam rear suspension, with a front-wheel drive configuration. 3. Powertrain: Equipped with a 1.4T turbocharged engine, delivering a maximum horsepower of 141ps, peak torque of 235Nm, and maximum power of 104kW, paired with a 6-speed manual transmission.

Was this review help?
117
Share
LaBryce
08/15/2025, 10:51:31 PM

I've been driving the Bin Yue for almost two years now, mainly for commuting in the city. The average fuel consumption is around 9 liters per 100 kilometers, but it can spike to 11 liters in heavy traffic. On the highway, the lowest I've seen is just over 7 liters. In real-world experience, fuel consumption really depends on personal driving habits. For example, I prefer smooth acceleration and less braking, which helps keep fuel consumption within a reasonable range. As a compact SUV, the Bin Yue comes with a 1.5T turbocharged engine, which isn't particularly fuel-thirsty by design, but vehicle weight and road conditions also play a big role. For instance, frequent stops at city traffic lights increase fuel usage. Regular maintenance is crucial—I check the tire pressure monthly to ensure it's at the standard value and avoid revving the engine hard during cold starts. Overall, it's an economical and practical choice for daily family use—not stunning but reliable.

Was this review help?
9
Share
Expand All
McJasmine
10/18/2025, 11:32:27 PM

From an automotive technology perspective, the fuel consumption of the Binyue is primarily influenced by engine efficiency and the transmission system. It is equipped with a 1.5-liter turbocharged engine featuring an intelligent electronic control system, with standard MIIT-rated fuel consumption of approximately 8.5L/100km in urban conditions and around 7L on highways. However, actual driving conditions can cause significant fluctuations in fuel consumption. For example, aggressive throttle inputs or running the air conditioning at full blast can increase fuel consumption by up to 15%. The advantage of turbocharging is strong torque at low speeds, while it becomes more fuel-efficient during high-speed cruising. Poorly maintained transmission systems, such as aged transmission fluid, can lead to additional energy losses. I recommend owners pay close attention to maintenance schedules, such as replacing the oil filter every 10,000 kilometers, and keeping the air filter clean to improve efficiency. Additionally, the Binyue's lightweight design helps reduce baseline fuel consumption, but excessive load or underinflated tires will naturally increase fuel usage. Among similar models, its average performance ranks in the upper-middle tier.

Was this review help?
13
Share
Expand All
HaleyMarie
12/01/2025, 11:06:09 PM

Newbie driver sharing about Binyue's fuel consumption: Initially, the Binyue's fuel consumption was higher, around 9-10 liters per 100 kilometers, but after gradually mastering driving techniques, it dropped to just over 8 liters. I usually use ECO mode to reduce engine load, and cruise control on highways for better fuel efficiency. Before short trips, I fill up the tank and conduct tests, with actual measurements showing around 7.5 liters per 100 kilometers. The Binyue is lightweight, so it starts without dragging, but avoid aggressive acceleration, especially in urban areas. Compared to friends' cars in the same class, the Binyue is quite economical; I recommend downloading a fuel consumption monitoring app to track it, and its long-term maintenance costs are also low.

Was this review help?
9
Share
Expand All
AdelynLynn
01/22/2026, 12:30:02 AM

Considering environmental protection, the Binyue's fuel consumption is moderate among small SUVs, averaging about 8L/100km, which has a minimal impact on carbon emissions. When driving, I try to plan routes to avoid congestion and brake less to save fuel and reduce exhaust emissions. It uses direct injection technology to improve combustion efficiency, making it greener than other SUVs, but high-speed operation or cold starts can increase fuel consumption. It is recommended that owners check components like the oxygen sensor to ensure clean emissions; proper maintenance can extend engine life and indirectly reduce fuel consumption. Choosing the eco-friendly mode is much better for the planet.

Was this review help?
14
Share
Expand All
RosalieDella
04/18/2026, 12:29:11 AM

As a long-term owner of the Bin Yue, I've found that fuel consumption heavily depends on driving style: I usually drive in mixed conditions, averaging 8 liters per 100 km, slightly higher in winter and lower in summer. Compared to vehicles like the Honda CR-V, the Bin Yue is more fuel-efficient with a durable engine. The key to saving fuel is maintaining steady speeds and minimizing idling; proper tire pressure can reduce consumption by 3%. Fuel efficiency noticeably improves after major maintenance, such as replacing spark plugs to enhance performance. Overall, it's affordable and worry-free, with manageable fuel consumption that's not the lowest but controllable.

Was this review help?
17
Share
Expand All
More Q&A

can natural gas be used in cars

Yes, natural gas can absolutely be used as a vehicle fuel, primarily in the form of Compressed Natural Gas (CNG) . Vehicles designed to run on CNG are a proven technology, offering lower fuel costs and reduced emissions compared to traditional gasoline. However, their practicality for an individual driver heavily depends on local fueling infrastructure, which can be limited. The core technology involves storing natural gas in high-pressure tanks, typically in the trunk or under the vehicle, and using a dedicated engine or a bi-fuel system that can switch between CNG and gasoline. A major advantage is cost; CNG often costs significantly less per gallon-of-gasoline-equivalent (GGE). Environmentally, burning CNG produces fewer greenhouse gases and almost no particulate matter. The most significant hurdle is refueling. While some regions have public stations, they are not as ubiquitous as gasoline stations. Home refueling units are an option but represent a substantial upfront investment. CNG vehicles also tend to have a slightly higher initial purchase price and a reduced driving range due to the space the fuel tanks occupy. Here’s a quick comparison of key considerations: Factor CNG Vehicle Traditional Gasoline Vehicle Fuel Cost (per GGE) Typically 30-50% lower Standard market price Emissions Lower CO2, minimal soot Higher CO2 and pollutants Range Often 200-300 miles Typically 300-400 miles Refueling Time Similar to gasoline Quick and widely available Refueling Availability Limited public stations Extremely widespread Vehicle Cost Higher upfront cost Standard market price For daily commuting within an area with good CNG infrastructure, like certain fleet operations or specific municipalities, it can be an excellent choice. For long-distance travel or those without reliable local access to CNG, a gasoline, diesel, or hybrid vehicle remains a more convenient option.
113
Share

can i return a rental car early

Yes, you can typically return a rental car early, but be prepared for potential financial implications. The key is understanding your rental agreement's terms, which often structure the rate based on a specific rental period. An early return may trigger an early return fee or a rate adjustment that could make the rental more expensive per day than originally quoted. The first step is to review your rental agreement carefully. Look for clauses related to "Early Return" or "Modification." Many major companies like Enterprise, Hertz, and Avis have policies that allow for early returns, but the cost structure is the critical factor. If you booked a weekly rate but return the car after only four days, you might be charged a higher daily rate for those four days, plus a possible fee. This is because discounted weekly or monthly rates are incentives for longer rentals. It is highly recommended to call the rental location directly before you return the car. Speaking with a manager gives you a chance to explain your situation. In some cases, if the location is busy and needs the vehicle, they might waive any fees. However, if you simply show up unannounced, the standard policy will almost certainly be enforced. The table below outlines potential outcomes based on common policy structures. Scenario Likely Financial Outcome Key Consideration Early return on a standard daily rate Minimal to no extra fee; you only pay for days used. The daily rate might be slightly higher than a weekly rate average. Early return disrupting a weekly/monthly discount Early return fee applied (e.g., $15-$50) and/or rate re-calculated at a higher daily rate. This is the most common penalty. The total cost could end up being close to your original quote. Returning early due to company operational issue Fees are typically waived. For example, if the car has a mechanical problem. Pre-paid reservation You will likely not receive a refund for the unused days. Pre-paid rates are often deeply discounted and are final. Finally, always inspect your return receipt carefully before leaving the lot. Ensure the charges match what you were told over the phone. While returning a rental car early is logistically simple, the financial incentive is almost always with the rental company to keep the car for the full duration.
103
Share

can toyota rav4 fit 3 car seats

Yes, a Toyota RAV4 can fit three car seats, but it is a tight fit and requires careful planning. The key to success is using the right combination of seat types, specifically narrower models, and understanding the limitations of the LATCH system. The second-row bench in the RAV4 is officially a 60/40 split seat, but the reality is that it's designed more comfortably for two car seats rather than three. The biggest challenge is the vehicle's hip room measurement, which is the width across the second row. For most recent RAV4 models, this measurement is around 55-56 inches. When you install three car seats side-by-side, you are working with a space that is not much wider than a standard park bench. This means bulky, wide seats meant for infants will likely not fit. You'll have the best luck with a combination of slim-profile car seats or using a booster seat for an older child, which takes up less physical space. Furthermore, the LATCH anchors are only available on the two outboard seats. The middle seat position must be secured using the vehicle's lap-and-shoulder seat belt, which is safe and approved but can be trickier to get a tight installation. My advice is to treat this as a "try before you buy" situation. If you already own the car seats, take them to the dealership and attempt the installation. If you are purchasing new seats, look for models marketed as "slim" or "3-across" and check their specific dimensions against the RAV4's interior width. While it's possible, it may not be the most convenient long-term solution for a family that regularly transports three young children. Factor Consideration for 3 Car Seats in a RAV4 Second-Row Hip Room Approximately 55.8 inches; limits seat width combinations. LATCH System Anchors Only available on the two window seats; center seat requires seat belt installation. Ideal Seat Combination Mix of rear-facing convertible, forward-facing, and a slim booster seat. Ease of Access Difficult to buckle children in the center position with two other seats installed. Recommended Slim Seat Brands Diono, Clek, Graco SlimFit are known for narrower profiles. Real-World Test Essential to verify fit with your specific car seats before finalizing.
101
Share

can i scrap a car without title

No, you generally cannot legally scrap a car without a title. The certificate of title is the primary legal document that proves you are the owner of the vehicle. Scrapyards and recycling centers are legally required to verify ownership before accepting a vehicle to avoid handling stolen property. Attempting to scrap a car without a title will almost certainly be rejected by reputable facilities. However, there are specific, legal pathways you might be able to follow depending on your situation and your state's regulations. The core issue is ownership verification. For a scrapyard, accepting a vehicle without a clear title is a significant liability. They could be fined or held responsible if the car is later discovered to have been stolen or have an outstanding lien. This is a universal practice across the United States to deter auto theft and fraud. Your options depend on why you don't have the title. If you've simply lost it, the solution is straightforward: apply for a duplicate title from your local Department of Motor Vehicles (DMV). This process involves filling out a form, paying a fee, and waiting for the new document to arrive. This is the simplest and most recommended route. If the vehicle is very old, inoperable, and has been in your possession for a long time, some states offer alternative processes. You might be able to apply for a bonded title . This involves purchasing a surety bond from an insurance company, which acts as a guarantee of your ownership for a set period (usually 3 years). If no one contests your ownership, you can then receive a clear title. Alternatively, some states have a specific "Certificate of Destruction" or "Salvage Title" process for vehicles that are only fit for scraping. You will need to contact your local DMV to understand the exact requirements, which can vary significantly. Potential Path to Scrap a Car Without a Standard Title Key Requirement State Variability Duplicate Title Application You must be the registered owner. Low; available in all states. Bonded Title Process Requires purchasing a surety bond. High; not available in all states, rules differ. Abandoned Vehicle Process Following specific state protocols for vehicles left on your property. Very High; each state has unique laws. State-Specific Affidavits Using forms for older vehicles of minimal value. Extreme; some states have these, others do not. The most critical step is to contact your local DMV and the scrapyard you plan to use. Explain your situation; they can provide the most accurate guidance for your location. Never attempt to bypass these rules, as the legal consequences outweigh any potential scrap value.
120
Share

can i put wider tires on my car

Yes, you can often put wider tires on your car, but it's not a simple swap. The key factors are clearance, wheel width, and the impact on your vehicle's systems. You must ensure the new tires don't rub against the suspension, fenders, or inner wheel wells when turning or going over bumps. A common rule is the "plus-sizing" concept, where you increase wheel diameter and tire width while decreasing the tire's aspect ratio (the sidewall height) to keep the overall diameter nearly identical. This preserves your speedometer accuracy and vehicle dynamics. The primary benefit of wider tires is increased contact patch —the area of the tire touching the road. This generally improves grip, especially during cornering and acceleration, leading to better dry-road handling. However, there are significant trade-offs. Wider tires are more prone to hydroplaning on wet roads because it's harder for them to disperse water. They can also increase road noise, reduce fuel economy due to higher rolling resistance, and place more strain on suspension components. Here’s a quick comparison of common outcomes: Upgrade Scenario Potential Benefit Key Consideration Slightly wider on stock wheels Minor grip improvement Exceeding wheel width can be unsafe Wider wheels and tires (properly sized) Maximized grip and aesthetics Significant cost; potential for rubbing Extremely wide tires (stretched fenders) Aggressive look for show cars Compromised daily driveability, legal issues Before making any changes, consult your owner's manual for manufacturer specifications or talk to a trusted tire professional. They can measure clearance and recommend a size that works with your specific car's setup, ensuring the modification is safe and effective.
106
Share

can multimeter test car battery

Yes, a standard digital multimeter is an excellent tool for performing a basic health check on your car battery. The most common and straightforward test is measuring the battery's open-circuit voltage , which gives a strong indication of its state of charge. A healthy, fully charged battery should read between 12.6 and 12.8 volts when the car is off. A reading significantly lower than 12.4 volts suggests the battery is undercharged and may need to be driven or charged to be tested accurately. While a multimeter can't simulate the massive current draw of starting the engine like a dedicated load tester can, you can perform a simple voltage drop test. Have a helper crank the engine while you monitor the voltage. If the voltage drops below approximately 9.6 volts during cranking, it indicates the battery is struggling and may be failing. It's also crucial to test for surface charge , which can give a falsely high voltage reading. To dissipate this, turn on the headlights for a minute or two with the engine off, then take your measurement. This provides a more accurate picture of the battery's real state of charge. For a complete diagnosis, combining multimeter voltage tests with a visual inspection for corrosion on the terminals is a reliable approach. Voltage Reading (Engine Off) State of Charge Interpretation 12.6V - 12.8V 100% Battery is fully charged and healthy. 12.4V - 12.6V 75% - 100% Battery is in good condition. 12.0V - 12.4V 25% - 75% Battery is undercharged; recharge and retest. 11.7V - 12.0V 0% - 25% Battery is deeply discharged; may be damaged. Below 11.7V 0% Battery is likely completely dead or has a faulty cell.
104
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.