What brand is the engine of the Landwind X7?

1 Answers
LeBentley
07/29/25 6:34pm
The engine of the Landwind X7 is provided by Shenyang Aerospace Mitsubishi and is a domestically produced engine. The 1.5T version of the Landwind X7 has an engine model JX4G15B5L, with a maximum power of 120kW and a maximum torque of 250Nm. The 1.5T version also has an engine model 4G63S4T, with a maximum power of 140kW and a maximum torque of 250Nm. For daily maintenance of the Landwind X7 engine, the following methods can be used: Use lubricating oil of appropriate quality grade. For gasoline engines, SD--SF grade gasoline engine oil should be selected based on the additional equipment of the intake and exhaust system and usage conditions. For diesel engines, CB--CD grade diesel engine oil should be selected based on mechanical load, with the selection standard not lower than the manufacturer's requirements. Regularly change the engine oil and filter. The quality of any grade of lubricating oil will change during use. After a certain mileage, performance deteriorates, which can cause various problems for the engine. To avoid faults, the oil should be changed regularly based on usage conditions, and the oil level should be kept moderate. When engine oil passes through the fine pores of the filter, solid particles and viscous substances in the oil accumulate in the filter. If the filter is blocked and the oil cannot pass through the filter element, it will either burst the filter element or open the safety valve, bypassing the filter and bringing contaminants back to the lubrication area, accelerating engine wear and increasing internal pollution. Regularly clean the crankcase. During engine operation, high-pressure unburned gas, acid, moisture, sulfur, and nitrogen oxides from the combustion chamber enter the crankcase through the gap between the piston rings and cylinder walls, mixing with metal powder from component wear to form sludge. A small amount remains suspended in the oil, while a large amount precipitates, blocking filters and oil passages, making engine lubrication difficult and causing wear. Regularly use radiator cleaner to clean the radiator. Removing rust and scale not only ensures the engine operates normally but also extends the overall lifespan of the radiator and engine.
Was this review help?
17
2
Share
More Forum Discussions

How Long After Failing the Motorcycle Test Can You Retake It?

You can schedule a retest for the motorcycle exam ten working days after failing. Cancellation of Appointment: If the applicant is unable to attend the exam at the scheduled time, they must apply to cancel the appointment one day in advance. Failure to attend the exam at the scheduled time without cancellation will result in the exam being marked as failed. Number of Retests: Each subject can be tested once, and if failed, can be retaken once. If the applicant does not attend the retest or fails the retest, the current exam session is terminated. If the subject three safety and civilized driving knowledge test is failed, the passed road driving skill test scores remain valid. Number of Appointments: Within the validity period of the driving skill test permit, the number of appointments for subject two and subject three road driving skill tests must not exceed five. If the fifth appointment still results in failure, the passed scores of other subjects will be invalidated.
3
1
Share

Can a C-class license drive a double-row mini truck?

C1 driver's license can drive a double-row mini truck. Permitted vehicle types for C-class license: According to the "Regulations on the Application and Use of Motor Vehicle Driver's Licenses", the permitted driving scope of a C1 driver's license includes small and mini passenger vehicles, light and mini cargo vehicles; light, small, and mini special-purpose vehicles; and small passenger vehicles with a seating capacity of 9 or fewer. Precautions for driving on highways with a C-class license: According to relevant regulations in the "Regulations on the Application and Use of Driver's Licenses", the first 12 months after a motor vehicle driver initially applies for a motor vehicle driver's license is the probationary period. During the probationary period, C1 drivers can drive on highways, provided that there is a "veteran driver" with more than three years of driving experience accompanying them in the front passenger seat. Otherwise, they will be fined.
15
0
Share

What should be paid attention to during sheet metal painting repair?

During sheet metal painting repair, the following matters should be noted: On-site inspection: Before automotive painting, the construction site must be inspected and prepared, keeping the ground clean and wall surfaces sanitary. If it's an outdoor construction site, the ground should be watered to prevent wind-blown sand and dust from affecting the gloss and weather resistance of the paint film during construction. Construction tools: Check the surface quality and cleanliness before painting. Before automotive painting, all tools used in construction, such as brushes, spray guns, paint mixing buckets, and stirring rods, must be kept highly clean and free from substances that could contaminate the paint, including oil stains, dust, water marks, and old paint residue. Color paint mixing: If color adjustment is needed, first test-mix a small sample. Only after matching the standard color panel should the mixing be expanded according to the tested ratio. Experience should be relied upon to understand the difference between wet and dry samples.
3
4
Share

Where is the Audi Q3 tailgate sensor switch located?

The Audi Q3 tailgate sensor switch is located on the inner side of the tailgate, where there are two buttons: one for simply closing the tailgate and the other for closing and locking the vehicle. The power tailgate feature means there is a button at the tailgate, allowing the owner to just press it lightly to automatically open or close the tailgate, making it convenient and effortless. The Audi Q3 is positioned as a compact SUV. In terms of body dimensions, the Elegance version measures 4481mm in length, 1848mm in width, and 1584mm in height; the Sport version measures 4495mm in length, 1848mm in width, and 1616mm in height. The LED daytime running lights on the Audi Q3's bumper have been removed, as Audi has integrated the LED daytime running lights with the headlights into a single unit. This design gives the front face of the Audi Q3 a cleaner and more streamlined appearance.
10
4
Share

What is the reason for the exclamation mark on the steering wheel preventing startup?

The exclamation mark on the steering wheel indicates the electric power steering warning light, which disappears immediately after the engine starts. The Electric Power Steering (EPS) system is a power steering system that directly relies on an electric motor to provide assistive torque. Compared to the traditional Hydraulic Power Steering (HPS) system, the EPS system offers many advantages. The EPS system mainly consists of a torque sensor, vehicle speed sensor, electric motor, reduction mechanism, and Electronic Control Unit (ECU). The electric power steering system evolved from the traditional mechanical steering system. It utilizes the power generated by an electric motor to assist the driver in steering operations. The system primarily comprises three major components: signal sensing devices (including torque sensor, steering angle sensor, and vehicle speed sensor), steering assist mechanism (electric motor, clutch, reduction transmission mechanism), and electronic control unit. The electric motor operates only when assistance is needed. When the driver operates the steering wheel, the torque and angle sensor generates corresponding voltage signals based on the input torque and steering angle. The vehicle speed sensor detects the speed signal, and the control unit issues commands to control the electric motor's operation based on the voltage and speed signals, thereby generating the required steering assistance.
6
5
Share

What is the mileage for a car's first maintenance?

The first maintenance for a new car is approximately 3,000 to 5,000 kilometers. Here are the details regarding new car maintenance: General situation: The first maintenance for a new car is quite special. Depending on the brand, the maintenance intervals vary. Generally, the first maintenance should be done within 3-5 months or after driving 3,000-5,000 kilometers. Some vehicles may even extend this to 8,000 kilometers. Critical stage: When a new car reaches 5,000 kilometers, it enters a crucial maintenance phase. In addition to routine inspections and maintenance, it is essential to replace the engine oil and oil filter, clean the air filter, and check the coolant level and freezing point during winter. Additionally, inspect the braking system for any leaks, ensure the brake pads are within the specified thickness, and examine the engine belt for wear. If necessary, adjust the belt tension and conduct a comprehensive inspection.
16
4
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.