···
Log in / Register

What are the requirements for booking Subject 3?

1Answers
VonJake
07/29/2025, 01:23:14 PM

To book Subject 3, you must first pass the Subject 2 exam. Subject 3, also known as the Road Safety Driving Test, is part of the motor vehicle driver's license assessment. It is the abbreviation for the road driving skills and safe civilized driving knowledge test in the motor vehicle driver's examination. The content of the road driving skills test varies depending on the type of vehicle you are licensed to drive. Additional information: Subject 3 precautions: 1. If a candidate's fingerprint verification fails, they must exit the vehicle to re-collect their fingerprint before rejoining the queue for the test. 2. If a candidate's score falls below the passing mark during the test, the system will automatically prompt the candidate to pull over. After completing the pull-over maneuver, the system will prompt the candidate to proceed to the next test. 3. After completing all required test items and driving a distance of more than 3 kilometers, the system will automatically prompt the candidate to pull over. Upon hearing the pull-over instruction, the candidate should choose a clear curb on the test route and complete the pull-over maneuver after confirming safety. Once the pull-over is completed, the system will announce the test results via voice broadcast.

Was this review help?
105
Share
More Q&A

What is the function of the exhaust valve?

The exhaust valve mainly has the following functions: 1. It allows the exhaust gas to be recirculated into the cylinder for combustion. This small amount of exhaust gas reduces the combustion temperature in the cylinder. Since NOX is generated under high-temperature and oxygen-rich conditions, the generation of NOX is suppressed, thereby reducing the NOX content in the exhaust gas. 2. When the throttle reaches a certain opening degree, the exhaust valve opens, connecting the exhaust gas in the cylinder to the intake pipe, which then enters the cylinder for recirculation and combustion. This ensures complete combustion of the exhaust gas and purifies the air. 3. The exhaust valve improves heat transfer efficiency in the condenser and evaporator by separating oil and gas, which is crucial for systems where the lubricating oil and working fluid have poor mutual solubility.
119
Share

Does Tar Remover Affect Car Paint?

Tar remover has little effect on car paint. Just rinse it off with clean water after spraying; if left unwashed, it may penetrate and cause the paint to discolor. Here is some information about tar remover: 1. Tar cleaner is used in homes, cars, boats, and RVs. It can effectively remove grease, ground stains, road stains caused by vehicles, and the toughest grease around houses. It is suitable for any washable surface and can powerfully eliminate heavy stains. 2. Store it in a place below 40°C, away from heat sources and open flames. Avoid exposure to sunlight, impact, puncturing, or burning the can.
114
Share

Why Does the Coolant Disappear Without Reason?

The reasons for the unexplained loss of coolant are as follows: The cylinder head gasket is corroded, leading to severe coolant loss; the oil holes on the cylinder head are blocked, causing insufficient lubrication of the rocker shaft and rocker arms, resulting in severe wear and increased engine noise. Below is additional information about coolant: 1. The car's coolant operates in a closed-loop system, with the water pump as the power source and the radiator used to cool the coolant. The main function of the coolant is to cool the engine, along with other roles such as rust prevention. 2. It is primarily composed of a mixture of water, ethylene glycol, propylene glycol, and other compounds, with specific boiling and freezing points. Particularly important is the freezing point of the coolant, which is generally below minus forty degrees Celsius.
102
Share

Is 30 liters of fuel for 400 kilometers considered normal fuel consumption?

It is considered normal fuel consumption for mainly urban driving, but it is relatively high for mixed driving conditions. Below is the relevant content introduction: Constant speed fuel consumption: Constant speed fuel consumption is the vehicle's fuel consumption per 100 kilometers obtained in the constant speed driving fuel consumption test specified by national standards for certain types of vehicles. These types of vehicles include: (1) M1 category, M2 category with a maximum design total mass not exceeding 3.5t, and N1 category compressed natural gas vehicles; M1 category and N1 category vehicles with a maximum design total mass not exceeding 3.5t, tested according to the method specified in GB/T-12545.1-2008 "Test methods for fuel consumption of passenger cars". (2) M2 category, M3 category with a maximum design total mass exceeding 3.5t, and N2 category, N3 category compressed natural gas vehicles; M2 category, M3 category, and N category vehicles with a maximum total mass greater than or equal to 2t, tested according to the method specified in GB/T12545.2-2001 "Test methods for fuel consumption of commercial vehicles".
115
Share

Is it true that new vehicles exempt from annual inspection within 6 years also don't need to replace the driving license?

6-year exemption from inspection does not require replacing the driving license. Here is additional information: Exemption process: Bring your ID card to the service hall of the vehicle management office to fill out an application form, then queue for a number; when your number is called, proceed to the corresponding service window, present your ID card, and submit the form to the staff for verification; upon approval, the annual inspection compliance label will be issued. On-site inspection process: Bring the required documents to the motor vehicle inspection agency to obtain the annual inspection form and have it stamped; take the annual inspection form to the motor vehicle inspection point for vehicle on-site inspection; after passing the inspection, bring the annual inspection form, driving license, inspection results form, and vehicle inspection certificate to the vehicle management office to obtain the motor vehicle inspection compliance label, and have the new inspection validity date stamped on the supplementary page of the driving license.
108
Share

What is a Stock Car?

Generally, if a car has been in stock for more than three months or half a year, it can be considered a stock car. For imported vehicles, due to factors such as transportation cycles, models manufactured more than one year ago are also regarded as stock cars. Currently, there is no clear definition for stock cars, but the term is indeed used in the automotive sales industry. The following are potential risks associated with stock cars: 1. After leaving the factory, various fluids, electronic components, batteries, rubber seals, and tires may deteriorate due to prolonged storage without periodic inspection and maintenance, leading to issues like moisture damage and aging. 2. Only a very few dealerships implement periodic inspection and maintenance measures. While the cost is not high, it consumes manpower and time. Some 4S stores even park new cars in open-air garages, exposing them to sun, wind, and rain. 3. For stock cars stored for too long, without proper warehouse management, the aging of electronic components and rubber products is difficult to monitor and requires professional testing equipment.
102
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.