What are the regulations for installing license plate screws on vehicles?

[CaydenMarie]

The regulations for installing license plate screws on vehicles are as follows: 1. Legal requirements for screw installation: For vehicles produced after March 1, 2016, both the front and rear license plates must have four installation holes each, requiring a total of eight screws (four for the front and four for the rear). If one hole is left empty and only seven screws are installed, it is considered "failure to install the license plate according to regulations." 2. According to the "Special Sealing Devices for Motor Vehicle License Plates" regulation: The sealing cap must bear the Chinese character abbreviation of the province, autonomous region, or municipality directly under the central government and the letter representing the issuing authority's code, which must match the abbreviation and code on the license plate.

[HaleyFitz]

When it comes to installing car license plate screws, plain and simple, you can't use ordinary screws. You must use the specialized anti-tamper screws issued by the vehicle management office. According to regulations, both the front and rear license plates must be secured with at least two fixing points each, totaling four screws. These screws must be tightened properly without any looseness or misalignment. During installation, just align them with the holes and screw them in vertically using a wrench. I often help friends with their cars and have seen many people cutting corners by using household screws, only to get fined 200 yuan by the police, possibly with demerit points. The key point is that these screws are tamper-proof, preventing others from swapping license plates and protecting vehicle information and safety. During every annual inspection, the condition of the screws is also checked for rust or damage. If they're worn out, replace them immediately with official parts—don't take any chances.

[EmilyFitz]

National traffic regulations have mandatory requirements that license plate screws must be specialized and sealed, and ordinary substitutes cannot be used. The installation positions are such that the front and rear license plates are each fixed to designated positions with screws, generally two or more per plate. The screws must be tightened without any looseness, and the license plate must not obscure the numbers. For improper installation, the law stipulates a fine starting from 200 yuan, and in severe cases, points may be deducted, affecting the annual inspection. As a car owner, I believe it's essential to obtain the corresponding screws from the vehicle management office for self-installation or seek assistance from service points. After installation, check the flatness to avoid any issues caused by shaking during driving.

[LaElisa]

I've been driving for decades, and while installing license plates is simple, the rules are strict. You must use tamper-proof screws, with two or four screws tightened at the front and back. Don't cut corners by using household screws, or you might get fined. When installing, use a wrench to screw them vertically into the holes without tilting. A common issue is rusted or broken screws, which should be replaced promptly. If you don’t comply and get caught during a traffic police check, you’ll be in big trouble.

[DeMadeline]

License plate screw installation emphasizes theft prevention and safety. Each license plate must be secured with anti-tamper fixed screws, with at least two points for both front and rear plates. During installation, the screws should be fully tightened into the holes without any tilting or looseness, ensuring the license plate numbers remain clearly visible. In my daily driving routine, I make it a habit to check the screws for integrity every time I wash the car, as regulations require that screws must not be missing to avoid affecting identification; otherwise, the police can issue fines. The benefits include preventing license plate theft and aiding in accident identification. Never opt for speed by using ordinary screws for installation.

[McEllie]

Vehicle license plate screw installation regulations clearly state: Use the dedicated sealing screws provided by the vehicle management office, with at least two fixing points for both front and rear plates to ensure secure and tight installation. The installation method is simple—just align the screw with the plate hole and screw it in vertically without using excessive force. Having used them several times, I find it easy but attention to detail is necessary, such as ensuring screws do not obscure the license plate numbers or cause tilting. Violations may result in a 200-yuan fine, posing significant risks. Relevant advice: Regularly check for rust on screws and replace them promptly to avoid inspection issues, preventing problems before they occur.