···
Log in / Register

What are the body dimensions of the SAIC Tayron?

6Answers
OHaven
09/02/2025, 12:00:32 AM

The body dimensions of the SAIC Tayron are: length 4590 mm, width 1860 mm, height 1660 mm, with a wheelbase of 2731 mm and a fuel tank capacity of 60 liters. It is a 5-door, 5-seater mid-size SUV launched by FAW-Volkswagen. The SAIC Tayron is equipped with a 1.4T inline 4-cylinder turbocharged engine, with a maximum power of 110 kW and a maximum power speed range of 5000 to 6000 rpm. The SAIC Tayron adopts a front-engine, front-wheel-drive layout, with MacPherson independent suspension at the front and multi-link independent suspension at the rear, featuring a unibody structure.

Was this review help?
102
Share
StReese
09/14/2025, 02:13:05 AM

I've been driving this Tanyue for over half a year. The vehicle dimensions are approximately 4453mm in length, 1841mm in width, 1632mm in height, with a wheelbase of 2680mm. For urban commuting, these dimensions are quite suitable - it's nimble around corners without feeling cramped, and parking is a breeze. The space utilization is excellent, with the rear seats comfortably accommodating three adults without feeling tight. The trunk easily handles luggage or bulky items. Safety-wise, the well-proportioned body provides excellent driving visibility, and it feels rock-solid on highways. Fuel consumption is reasonable, and routine maintenance is hassle-free, making it ideal for daily commutes or weekend family trips. The long wheelbase delivers a comfortable ride quality - my friends always compliment how pleasant it is to sit in during outings.

Was this review help?
3
Share
Expand All
StDante
10/28/2025, 02:56:20 AM

Driving the Tayron for daily commuting, the body dimensions are 4453mm in length, 1841mm in width, and 1632mm in height, with a wheelbase of 2680mm. It offers good handling, with a moderate size that makes it easy to navigate through city traffic and park without hassle. The high-speed stability is excellent, with minimal wind noise. The interior space, ensured by the wheelbase, provides ample legroom and headroom, making long drives comfortable. The trunk capacity is 455L, sufficient for daily necessities. The well-proportioned dimensions contribute to fuel efficiency, making it much more economical than larger SUVs. Maintenance is straightforward, and cleaning the body is easy. It's ideal for those who travel frequently.

Was this review help?
16
Share
Expand All
SimonMarie
12/11/2025, 02:12:15 AM

I drive the Tayron with my kids. The body dimensions are 4453mm in length, 1841mm in width, and 1632mm in height, with a wheelbase of 2680mm. The spacious rear seats easily accommodate strollers or toys. The ideal height ensures good visibility for safe driving. The long wheelbase provides a comfortable ride, minimizing bumps. The trunk is spacious enough for groceries and shopping. The practical dimensions make daily family life convenient.

Was this review help?
8
Share
Expand All
VanTessa
01/31/2026, 03:17:20 AM

I like the appearance of the Tayron. The body dimensions are 4453mm in length, 1841mm in width, and 1632mm in height, with a wheelbase of 2680mm. Its elegant lines make it stand out when parked on the roadside, and its moderate size ensures it doesn’t look bulky. The interior space is well-optimized, offering ample legroom. The strong design sense makes it a head-turner when driven out. It handles flexibly with a small turning radius. The size and proportions are just right for daily driving needs.

Was this review help?
20
Share
Expand All
LaJosiah
04/26/2026, 01:54:19 PM

The Tanyue has a body length of 4453mm, width of 1841mm, height of 1632mm, and a wheelbase of 2680mm. I focus on space practicality, with a spacious rear seat that comfortably accommodates multiple passengers, and the wheelbase ensures fatigue-free long-distance travel. The large trunk is convenient for cargo transportation, and the height design prevents head bumps. The dimensions strike a balance between comfort and flexibility, making daily parking easy and ensuring stability at high speeds. The fuel consumption is reasonable, making it suitable for a busy lifestyle.

Was this review help?
6
Share
Expand All
More Q&A

What is the function of the exhaust valve?

The exhaust valve mainly has the following functions: 1. It allows the exhaust gas to be recirculated into the cylinder for combustion. This small amount of exhaust gas reduces the combustion temperature in the cylinder. Since NOX is generated under high-temperature and oxygen-rich conditions, the generation of NOX is suppressed, thereby reducing the NOX content in the exhaust gas. 2. When the throttle reaches a certain opening degree, the exhaust valve opens, connecting the exhaust gas in the cylinder to the intake pipe, which then enters the cylinder for recirculation and combustion. This ensures complete combustion of the exhaust gas and purifies the air. 3. The exhaust valve improves heat transfer efficiency in the condenser and evaporator by separating oil and gas, which is crucial for systems where the lubricating oil and working fluid have poor mutual solubility.
119
Share

Does Tar Remover Affect Car Paint?

Tar remover has little effect on car paint. Just rinse it off with clean water after spraying; if left unwashed, it may penetrate and cause the paint to discolor. Here is some information about tar remover: 1. Tar cleaner is used in homes, cars, boats, and RVs. It can effectively remove grease, ground stains, road stains caused by vehicles, and the toughest grease around houses. It is suitable for any washable surface and can powerfully eliminate heavy stains. 2. Store it in a place below 40°C, away from heat sources and open flames. Avoid exposure to sunlight, impact, puncturing, or burning the can.
114
Share

Why Does the Coolant Disappear Without Reason?

The reasons for the unexplained loss of coolant are as follows: The cylinder head gasket is corroded, leading to severe coolant loss; the oil holes on the cylinder head are blocked, causing insufficient lubrication of the rocker shaft and rocker arms, resulting in severe wear and increased engine noise. Below is additional information about coolant: 1. The car's coolant operates in a closed-loop system, with the water pump as the power source and the radiator used to cool the coolant. The main function of the coolant is to cool the engine, along with other roles such as rust prevention. 2. It is primarily composed of a mixture of water, ethylene glycol, propylene glycol, and other compounds, with specific boiling and freezing points. Particularly important is the freezing point of the coolant, which is generally below minus forty degrees Celsius.
102
Share

Is 30 liters of fuel for 400 kilometers considered normal fuel consumption?

It is considered normal fuel consumption for mainly urban driving, but it is relatively high for mixed driving conditions. Below is the relevant content introduction: Constant speed fuel consumption: Constant speed fuel consumption is the vehicle's fuel consumption per 100 kilometers obtained in the constant speed driving fuel consumption test specified by national standards for certain types of vehicles. These types of vehicles include: (1) M1 category, M2 category with a maximum design total mass not exceeding 3.5t, and N1 category compressed natural gas vehicles; M1 category and N1 category vehicles with a maximum design total mass not exceeding 3.5t, tested according to the method specified in GB/T-12545.1-2008 "Test methods for fuel consumption of passenger cars". (2) M2 category, M3 category with a maximum design total mass exceeding 3.5t, and N2 category, N3 category compressed natural gas vehicles; M2 category, M3 category, and N category vehicles with a maximum total mass greater than or equal to 2t, tested according to the method specified in GB/T12545.2-2001 "Test methods for fuel consumption of commercial vehicles".
115
Share

Is it true that new vehicles exempt from annual inspection within 6 years also don't need to replace the driving license?

6-year exemption from inspection does not require replacing the driving license. Here is additional information: Exemption process: Bring your ID card to the service hall of the vehicle management office to fill out an application form, then queue for a number; when your number is called, proceed to the corresponding service window, present your ID card, and submit the form to the staff for verification; upon approval, the annual inspection compliance label will be issued. On-site inspection process: Bring the required documents to the motor vehicle inspection agency to obtain the annual inspection form and have it stamped; take the annual inspection form to the motor vehicle inspection point for vehicle on-site inspection; after passing the inspection, bring the annual inspection form, driving license, inspection results form, and vehicle inspection certificate to the vehicle management office to obtain the motor vehicle inspection compliance label, and have the new inspection validity date stamped on the supplementary page of the driving license.
108
Share

What is a Stock Car?

Generally, if a car has been in stock for more than three months or half a year, it can be considered a stock car. For imported vehicles, due to factors such as transportation cycles, models manufactured more than one year ago are also regarded as stock cars. Currently, there is no clear definition for stock cars, but the term is indeed used in the automotive sales industry. The following are potential risks associated with stock cars: 1. After leaving the factory, various fluids, electronic components, batteries, rubber seals, and tires may deteriorate due to prolonged storage without periodic inspection and maintenance, leading to issues like moisture damage and aging. 2. Only a very few dealerships implement periodic inspection and maintenance measures. While the cost is not high, it consumes manpower and time. Some 4S stores even park new cars in open-air garages, exposing them to sun, wind, and rain. 3. For stock cars stored for too long, without proper warehouse management, the aging of electronic components and rubber products is difficult to monitor and requires professional testing equipment.
102
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.