···
Log in / Register

Should motor vehicles yield to school buses when encountering them?

6Answers
LaGenevieve
09/08/2025, 10:24:37 PM

Yes, yielding is required. Below are the specific details regarding this regulation: Introduction: When driving a motor vehicle and encountering emergency vehicles such as police cars, fire trucks, ambulances, or engineering rescue vehicles performing urgent tasks, you must yield promptly. Additionally, you should give way to road maintenance vehicles or engineering vehicles that are currently operating. If a school bus stops on a road with only one lane in the same direction, vehicles behind must stop and wait, and are not allowed to overtake. If a school bus stops on a road with two or more lanes in the same direction, vehicles in the lane behind the school bus and in the adjacent lane must stop and wait, while vehicles in other lanes should slow down and pass. Vehicles waiting behind the school bus must not honk or use lights to urge the school bus to move. Theoretically: In theory, whether it's a special vehicle, a school bus, a regular vehicle, or a pedestrian, yielding is necessary. This is about being responsible for yourself and others.

Was this review help?
116
Share
SanCharles
09/20/2025, 03:21:23 AM

As parents who shuttle our kids daily, I must stress the absolute necessity of yielding to school buses. When a school bus activates its red lights or extends the stop sign, all vehicles must come to a complete halt—no passing or detouring is permitted. Children may cross the road while disembarking, and their awareness of safety is often limited; the slightest lapse can lead to accidents. Once, in my neighborhood, I witnessed a driver hastily rushing past, only to be fined on the spot by police and nearly causing a collision. Maintain a distance of at least 5 meters, and only proceed once the bus retracts its signage or deactivates its lights. This rule is no trivial matter—it concerns life safety and community trust. Make it a habit while driving: slow down and prepare to stop at the sight of a school bus, ensuring safety comes first. The safety of our children is our future; waiting a few extra minutes is a small price to pay.

Was this review help?
3
Share
Expand All
DeLevi
11/03/2025, 02:44:26 AM

From a traffic regulation perspective, yielding to school buses while driving is mandatory. Regulations clearly require all vehicles in all directions to stop when a school bus displays its stop signal—including those in opposing lanes and same-direction lanes. The nationwide uniform rule mandates a complete stop when the red flashing lights are activated and the stop arm is extended, typically requiring a distance of approximately 10 feet. Violators face substantial fines and penalty points on their driving records, with severe cases potentially leading to liability for major accidents. While there are slight variations between urban and rural road conditions, the core principle remains ensuring student safety during boarding and disembarking. Having followed this issue for years, I've observed many drivers neglecting this rule and consequently receiving tickets. Remember, you may only proceed after the signals cease; always stay vigilant of school bus movements during daily driving to ensure compliance.

Was this review help?
11
Share
Expand All
OArcher
12/17/2025, 02:44:32 AM

As a new driver who just got my license, my driving instructor specifically taught me this: you must yield to school buses. Especially when the school bus stops with its red lights flashing or a stop sign extended, I need to come to a complete stop immediately, no matter how much of a hurry I'm in. The rule is simple – on a two-lane road, all directions must stop; on a single-lane road, only the same direction must stop. New drivers tend to be careless, but one oversight could lead to an accident. The instructor said to maintain a safe distance of at least 3 meters and wait until all students have finished boarding or exiting before moving. This was also heavily emphasized in the driving test. Now when I see a school bus while driving, I proactively slow down to develop good habits. Practicing yielding more often can reduce risks and avoid tickets.

Was this review help?
9
Share
Expand All
CeciliaLee
02/06/2026, 03:33:04 AM

As a regular commuter who often encounters school buses, I'll say it straight: you must yield without hesitation. When a school bus stops with its lights flashing or a stop sign displayed, come to a complete halt immediately and wait at least 5 seconds until the signal ends. This is especially common during rush hours on workdays - regulations require all vehicles to stop and yield to ensure student safety. I've made it a habit to allocate extra time for such situations, as rushing past could result in fines exceeding 1,000 yuan and pose serious dangers. I remember one personal experience: I stopped properly but the driver in the adjacent lane didn't, nearly hitting a child. My commuting experience has taught me that slowing down is safer, and paying extra attention to signal movements saves both time and trouble.

Was this review help?
12
Share
Expand All
DiEmmett
05/02/2026, 12:18:06 PM

With over 20 years of driving experience, I can guarantee that I always yield to school buses. When a school bus stops with its red lights flashing or the stop sign extended, I decisively stop and wait until it's over, keeping a safe distance. I've encountered similar situations on both urban and rural roads—once stopping on a narrow road while an oncoming driver rushed past and got a ticket; another time waiting until students safely disembarked before proceeding. Veteran drivers recommend developing an instinctive reaction: slow down and prepare to stop when you see a school bus, avoiding reckless actions due to impatience. Wait patiently for signal changes to ensure driving responsibilities are properly fulfilled. Experience proves that this rule is crucial for overall safety and should never be taken lightly.

Was this review help?
9
Share
Expand All
More Q&A

What to Do When a Car Battery Won't Charge?

Check if the battery is low on electrolyte. If the electrolyte has dried up, first add distilled water. After adding enough, do not replace the battery's filler caps. Connect a 220V ordinary incandescent bulb in series with the battery and then to a household 220V AC power source to see if the bulb can light up normally. If the bulb lights up normally, continue supplying power for about 1 minute before disconnecting. Wait a few minutes, then connect again for 1 minute. Repeat the above step three to five times, then connect the battery to the charger for a normal 15-hour charging session.
119
Share

How to turn off the automatic headlights on the 2021 RAV4?

First, press the vehicle's one-touch start button to start the engine, keeping the car in an operational state. Otherwise, you won't be able to turn on the automatic headlight switch. Locate the lever on the left side of the steering wheel and rotate the outermost knob. Find the AUTO button for adjusting the automatic headlights and set the switch to the AUTO position. Adjust the central light control knob from the "0" position to the "AUTO" position to activate the automatic headlight function.
117
Share

What maintenance should be done at 50,000 kilometers for a car?

The following maintenance should be performed at 50,000 kilometers for a car: 1. Replace engine oil and filter: Depending on the road conditions frequently driven on, normally change the oil every 5,000 kilometers; if there is a lot of dust, change the oil every 3,000 kilometers. 2. Check and replace brake pads: The lifespan of vehicle brake pads is about 4-5 years or 40,000 kilometers. The degree of wear varies depending on driving habits, driving environment, and speed. Generally, vehicles that frequently drive on highways experience minimal brake pad wear, while those often driven in the city with frequent traffic jams suffer more severe brake pad wear. 3. Check and replace spark plugs: They typically last 2-3 years or 20,000-30,000 kilometers. However, if the vehicle shows signs of insufficient power or acceleration shaking, it may indicate a problem with the spark plugs, which should be checked as soon as possible. 4. Clean the throttle body and fuel injectors: Over time, the throttle body and fuel injectors can accumulate dirt or carbon deposits and require regular cleaning. Generally, vehicles that have run over 50,000 kilometers need to be checked and cleaned, but the cleaning frequency should be determined based on the driving environment. 5. Clean the radiator: When a vehicle has been driven over 40,000-50,000 kilometers, the radiator often accumulates dirt and grime, affecting its cooling and cleaning functions for the engine. 6. Replace brake fluid: In addition to brake pads, brake fluid should also be replaced regularly. It can be replaced along with the brake pads or based on the mileage driven. 7. Pay attention to the tires, especially the spare tire: The typical lifespan of vehicle tires is also 4-5 years. Even if the mileage is low, tires often exposed to sunlight can age significantly. Therefore, if there are large cracks on the tire sidewalls or the tread pattern has reached the minimum limit, check whether they need to be replaced. Also, don’t forget to replace the spare tire. Although it is not used frequently, it is better to be prepared.
120
Share

How to Replace the Battery in a Volkswagen T-Roc Car Key?

Pull out the mechanical key by releasing the clip at the end of the key, then stand the key upright and use a screwdriver to pry it open. After separating the casing, remove the old battery directly and observe the battery type to determine the battery model. Replace with a new battery and secure the device in reverse order. Improper battery replacement may damage the car key. Before replacing the battery, check the battery model in advance. When selecting a battery, ensure the size, specifications, and rated voltage match those of the old battery.
119
Share

What are the steps for engine disassembly?

Engine disassembly steps are as follows: Proceed in the order of machine, assembly, component, sub-assembly, and part. During disassembly, pay attention to checking alignment marks to ensure proper reassembly. When removing various threaded fasteners, follow professional symmetrical sequences to ensure complete removal without damage. Engine types include: 1. By fuel type: gasoline engine, diesel engine; 2. By stroke: four-stroke internal combustion engine, two-stroke internal combustion engine; 3. By cooling method: water-cooled engine, air-cooled engine; 4. By cylinder configuration: single-cylinder engine, twin-cylinder engine; 5. By intake system: naturally aspirated engine, turbocharged engine, supercharged engine.
119
Share

Are Car Key Batteries Universal?

Car key batteries are not universal. Each key's battery has a model number, and currently, there are about 10 types of car key batteries available. When replacing the battery, it is essential to first confirm the battery number and then replace it accordingly. Common battery numbers for car keys include 2032, 2025, 2016, 1632, 1620, and 1616. You only need to purchase the battery with the corresponding number to replace the key's battery. Among these, the CR2016 coin-type battery is commonly used. This type of battery has a voltage of 3V, while car key batteries typically operate on 9V. The battery diameter is 20mm, and the thickness is 1.6mm. When replacing the batteries, it is usually recommended to replace all three batteries at the same time.
108
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.