How to reset the tire pressure on the Trumpchi GS4?

[Grayson]

The method to reset the tire pressure on the Trumpchi GS4 is as follows: 1. Press the electronic parking button; 2. Locate and press the DISP button on the multifunction steering wheel to switch the instrument information; 3. Click the RES+ button on the multifunction steering wheel; 4. Switch to the tire pressure monitoring setup interface and click the reset button. Taking the 2021 Trumpchi GS4 as an example, its body dimensions are: length 4545mm, width 1856mm, height 1668mm, wheelbase 2680mm, fuel tank capacity 50l, minimum ground clearance 190mm, and body weight 1480kg.

[AbelDella]

When I drove the GAC GS4 before, I also encountered the issue of the tire pressure warning light coming on. Resetting it was quite simple. After starting the car but before driving, locate the menu button on the steering wheel, usually the MODE or INFO button. Press it to enter the vehicle settings menu, then select the tire pressure reset option and confirm. After resetting, it's best to drive on the highway for a while to let the system auto-calibrate, which helps the light turn off faster. Remember to check the tire pressure monthly. The normal tire pressure for the GAC GS4 is around 32-35 psi. In summer, the pressure increases due to heat, and in winter, it decreases. Maintaining the right pressure can extend tire life and prevent blowouts. If the reset doesn’t work, the sensor might be faulty or there could be a leak. Don’t push it—go straight to the 4S shop for a check-up; safety comes first. Checking the sensors during routine maintenance can save a lot of trouble. I’ve made it a habit for years, and my car has never had any accidents.

[BenjaminLynn]

As a seasoned driver of the Trumpchi GS4, I'll walk you through the proper way to reset the tire pressure monitoring system. First, start the car on level ground without pressing the accelerator. Locate the settings icon on the dashboard screen, enter the driving assistance menu, select the tire pressure reset function, and confirm. Some model years may require holding down a steering wheel button for several seconds. After resetting, drive a few kilometers for the system to update data. If the warning light remains on, it could indicate dirty sensors or incorrect tire pressure (manually adjust to 30-35 psi). Pro tip: Regularly check pressure with a professional gauge rather than relying solely on the monitoring system, as aging and road conditions affect accuracy. Neglecting timely resets may trigger false alarms that distract drivers and potentially cause accidents.

[MacMary]

I've performed tire pressure reset multiple times. The TPMS on the GAC GS4 often requires manual reset after inflation or tire replacement. Simple steps: start the engine, use the left steering wheel button to navigate to vehicle info menu, switch to tire pressure reset option, confirm and wait for completion. After reset, drive at highway speed for a few minutes and the warning will disappear. Develop a habit of regularly checking tires for damage/tread marks, maintaining around 33 psi for better fuel efficiency and reduced noise.

[Harriet]

Be careful when resetting the tire pressure light. Start the car and park in a safe place, use the steering wheel navigation buttons to enter system settings, find the tire pressure option, and press reset. If the reset fails, it may indicate low tire pressure or a sensor malfunction. Inflate the tires to 32-35 psi and try again. Failure to reset the warning light promptly will cause it to stay on, distracting you while driving and increasing the risk of accidents, especially at night or in rainy conditions. I emphasize that tire maintenance should not be overlooked. Quarterly checks can prevent leaks, save on repair costs, and ensure family safety.

[McLily]

Resetting the tire pressure on the Trumpchi GS4 is not difficult. After starting the car, use the steering wheel buttons to navigate to the settings menu, select tire pressure reset, and confirm. After resetting, drive for a while to allow the sensors to calibrate, and the warning light will turn off automatically. Maintaining normal tire pressure around 34 psi ensures more stable driving and reduces wear. While resetting, check the tire condition—replace any with cracks promptly to improve handling, comfort, and fuel efficiency, saving money in the long run.