···
Log in / Register

What is the yellow dot on the car?

6Answers
OElisa
07/23/2025, 02:30:14 PM

There are two possibilities, here are the details: Dust or other impurities: When driving in dusty areas, dust and impurities may accumulate on white paint surfaces. Some impurities are stubborn and cannot be removed with regular cleaning, such as tar and bird droppings. These sticky impurities require special cleaners for soaking, stain removal, and rinsing to be completely eliminated. Car rust: During windy and rainy weather, if the car is parked outdoors, the inner layer of the car cover may repeatedly whip the paint, creating numerous tiny scratches on the body. If sand and dust get inside the cover, the number of scratches increases. Over time, this can also dull the paint. Additionally, after a sandstorm, avoid using a duster or cloth to clean sand particles off the car body directly. Instead, rinse the car with water to prevent the sand particles on the duster or cloth from scratching the paint.

Was this review help?
116
Share
SanEva
08/10/2025, 10:09:37 AM

Last month when I drove back from the outskirts, several small yellow spots inexplicably appeared on the car body, possibly from tree resin or dried splashed mud. If these small stains aren’t cleaned promptly, they can penetrate the paint, causing oxidation or even peeling. Last time, I used automotive clay to gently remove them, but it’s important to choose specialized products to avoid scratching the surface. Paint protection is crucial, especially for white cars which show dirt easily. It’s advisable to park away from tree canopies and corrosive environments. Regular washing with mild detergent and waxing can extend the car’s lifespan. Maintaining a clean appearance isn’t just about aesthetics—it also preserves the vehicle’s value. Small issues like these can accumulate and lead to bigger problems if ignored.

Was this review help?
8
Share
Expand All
LeOscar
09/22/2025, 04:57:24 AM

Yellow dots often appear on the windshield, especially in the corners or edges. These are typically firing points or coating marks left during installation to help the sealant bond more securely. I've researched automotive design details—these dots don't obstruct vision but are actually part of safety considerations, serving as reference points for calibrating driver-assistance systems. Modern vehicle ADAS features rely on such precise positioning, and damaging or covering them with stains may impair performance. Avoid scraping them off while driving; just wipe gently with a damp soft cloth—no special treatment needed. Understanding these minor details can ease unnecessary concerns. As a side note, regularly check the windshield for cracks.

Was this review help?
18
Share
Expand All
ConnorMarie
11/05/2025, 10:17:12 PM

Occasionally, yellow dots appear on the sidewalls of tires. I've encountered this with my old car—they actually mark the lightest point of the tire during manufacturing. When mechanics install the tire, aligning this point with the valve stem helps optimize wheel balance and prevents steering wheel vibration. Neglecting proper installation may accelerate wear or affect steering feel, so I recommend reminding service personnel to check alignment during every tire change. Proper wheel balance contributes to smoother driving and better fuel efficiency. That tiny dot is crucial for daily safety—address any irregularities promptly.

Was this review help?
9
Share
Expand All
OAndrew
12/27/2025, 12:04:42 AM

When I noticed yellow spots on my car's bumper, I tried to handle it myself with a DIY approach. A friend mentioned it might be bird droppings or acidic residue. I used an online-purchased stain remover spray, which took just a few minutes to wipe off, but if it penetrates the primer, it could turn into rust spots. The whole process is simple—just prepare some protective gloves and clean water. It's low-cost and time-saving. Car paint maintenance is a science; light stains are easy to deal with, but severe cases require professional repair. Developing a regular cleaning habit can prevent bigger issues.

Was this review help?
20
Share
Expand All
LeGrant
03/24/2026, 04:25:40 AM

As a novice driver, I once noticed yellow dots at the edges of the windshield while washing my car and was startled, thinking they were flaws. Later, I saw an explanation on a forum that these are actually pre-installed reference points by the factory, used to assist with UV protection or ADAS system camera calibration. Knowing they don't affect driving put my mind at ease, and learning more about these car details can reduce misjudgment concerns. Observing these small features during daily driving helps—your car is a reliable partner, and understanding it well is key to using it effectively.

Was this review help?
6
Share
Expand All
More Q&A

What is the standard ground clearance for an SUV?

The standard ground clearance for an SUV is greater than or equal to 200mm. SUV models include: Haval H6, Honda CR-V, Honda Vezel, Nissan Qashqai, Haval M6, etc. Taking the 2021 Haval H6 as an example, its body dimensions are: length 4615mm, width 1860mm, height 1720mm, wheelbase 2680mm, minimum ground clearance 182mm, and body weight 1675kg. The 2021 Haval H6 is equipped with a 1.5T turbocharged engine, with a maximum horsepower of 150PS, maximum torque of 210Nm, maximum power of 110kW, and is paired with a 6-speed manual transmission.
112
Share

How to Check the Date on a Car Seat Belt?

To check the date on a car seat belt, locate the end of the seat belt where the date is usually marked. The method for replacing a seat belt is as follows: 1. Locate the wiring under the car seat to find the sensor line of the seat belt buckle. 2. Remove the seat cushion, take out the airbag, find the bolt securing the seat belt, and remove the seat belt buckle. 3. Locate the seat cushion sensor inside the seat cushion and remove it. 4. Install the new seat belt buckle onto the seat and insert the bolt. 5. Install the weight sensor onto the car seat, then attach the new retractor and tighten it with a wrench. 6. Reinstall the seat cushion onto the car seat and neatly arrange the wiring at the bottom of the seat.
110
Share

Where is the MG6's Cabin Air Filter Located?

The cabin air filter of the MG6 is located behind the glove box on the passenger side. The function of the cabin air filter is to separate dust, pollen, grinding particles, and other solid impurities from the air. Taking the 2020 MG6 as an example, it belongs to the compact car category, with body dimensions of: length 4704mm, width 1848mm, height 1466mm, a wheelbase of 2715mm, a fuel tank capacity of 50 liters, and a curb weight of 1300kg. The 2020 MG6 features a MacPherson strut front suspension and a multi-link independent rear suspension. It is equipped with a 1.5L turbocharged engine, delivering a maximum horsepower of 181PS, a maximum power of 133kW, and a maximum torque of 285Nm, paired with a 6-speed manual transmission.
117
Share

What is the difference between hybrid electric vehicles and plug-in hybrid electric vehicles?

The differences between hybrid electric vehicles (HEVs) and plug-in hybrid electric vehicles (PHEVs) are: 1. Different charging methods: HEVs do not use a pure electric charging mode; PHEVs can be charged in a pure electric mode. 2. Different power sources: The main power source of HEVs is engine oil, with electricity serving only as an auxiliary function; the power source of PHEVs is the battery. The principle of HEVs is to power the car by simultaneously using the internal combustion engine and the electric motor to drive the vehicle. The principle of PHEVs is to charge the battery pack through plug-in charging, allowing the electric motor and the gasoline engine to drive the vehicle together or in pure electric mode, thereby reducing fuel consumption and air pollution.
119
Share

Where is the engine number located on the Sagitar?

The engine number of the Sagitar is located at the junction between the engine and the transmission. Taking the 2021 Sagitar as an example, it is a compact car with body dimensions of 4753mm in length, 1800mm in width, and 1462mm in height, a wheelbase of 2731mm, a minimum ground clearance of 108mm, and a curb weight of 1355kg. The 2021 Sagitar features a front MacPherson strut independent suspension and a rear multi-link independent suspension, with a front-wheel-drive layout. It is equipped with a 1.2T turbocharged engine, delivering a maximum horsepower of 116PS, a maximum torque of 175Nm, and a maximum power of 85kW, paired with a 5-speed manual transmission.
114
Share

What is the method to determine excessive steering gear play?

To determine excessive steering gear play, look for noticeable looseness or abnormal noises. The adjustment method for excessive steering gear play is: there is an adjustment screw on each side of the steering gear, and the tighter you adjust it, the smaller the play becomes. The steering gear assists the driver by reducing the effort required to turn the steering wheel, making driving easier and more convenient. Steering gears are mainly divided into rack-and-pinion steering and worm-and-sector steering. Power steering systems include: electric power steering (EPS), hydraulic rack-and-pinion power steering, and electro-hydraulic power steering. Normally, the free play of the steering gear is about 10 to 15mm.
105
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.