···
Log in / Register

How to Replace the Sunny's Air Conditioning Filter?

6Answers
CharlesAnn
07/28/2025, 11:33:22 PM

Method for replacing the Sunny's air conditioning filter: 1. Prepare a new air conditioning filter; 2. Pay attention to the arrow direction, which indicates the air intake direction—the arrow points toward the seat, and the tail points toward the engine side. The air conditioning filter is located above the left foot area of the front passenger seat, and the white cover on the right side is the air conditioning filter cover; 3. Remove the cover by hand from below; 4. Align the filter direction, push it in, and close the cover. The air conditioning filter can filter the air entering the cabin from outside, improving air cleanliness, providing a good air environment for passengers, and protecting their health.

Was this review help?
108
Share
Arianna
08/12/2025, 10:27:35 AM

I often change the air conditioning filter myself at home. Last year, a musty smell started coming from my car's AC vents, and upon checking, I found the filter needed replacing. It's located behind the glove compartment in front of the passenger seat. First, open the glove box—some models require pressing the release clips on both sides or unscrewing small screws to remove it. Then, gently pry open the filter cover and pull out the old filter. When installing the new filter, pay attention to the arrow direction, which usually points toward the rear of the car to ensure proper airflow. After finishing, the air feels much fresher. I replace it once a year, especially before seasonal changes, which helps alleviate pollen allergies. The whole process takes about 20 minutes and saves me the labor cost of going to a shop. Doing it myself is both cost-effective and fun.

Was this review help?
6
Share
Expand All
SanSienna
10/02/2025, 02:42:42 AM

Don't worry if it's your first time changing the cabin air filter—I learned from scratch too. It's usually located inside the glove compartment on the passenger side. First, empty the glove box and firmly press both sides to lower it. Move any cover plate aside if present. Then, you'll see the filter slot—gently pull out the old filter. When inserting the new one, align it with the airflow direction (usually the arrow points toward the interior). The whole process takes just 5-10 minutes. After replacement, the air inside becomes much cleaner, preventing bacterial growth. Recommended to change every 10,000-20,000 km or when airflow weakens. No tools needed—just your fingers. Give it a try—it's simple and healthy!

Was this review help?
15
Share
Expand All
StPeter
11/15/2025, 03:26:04 AM

As a health-conscious individual, I regularly replace the cabin air filter to avoid inhaling dust. It's located behind the glove box—simply open it and remove the cover panel. The old filter usually accumulates significant debris. When installing the new filter, ensure the arrow direction is correct for effective filtration. Replacing it reduces odors and allergens inside the car. The recommended frequency is once a year, offering noticeable benefits at a low cost. It's a simple DIY task that requires no professional skills.

Was this review help?
20
Share
Expand All
AlexisAnn
01/05/2026, 10:16:40 PM

Changing the air conditioning filter yourself is cost-effective. I spent 30 yuan on the filter, while it would cost over 100 yuan at a shop. The operation is easy: first locate the glove box on the passenger side, open it, and remove the cover. Pull out the old filter, then insert the new one with the arrow facing backward. No tools are needed, and the whole process takes 10 minutes. Regular replacement prevents a drop in AC efficiency and avoids moldy odors. It's recommended to check every 15,000 kilometers, just make sure the filter matches your car model.

Was this review help?
18
Share
Expand All
StVanessa
04/02/2026, 04:41:53 AM

Replacing the cabin air filter can be done quickly even when time is tight. I can finish it in just a few minutes with my car parked roadside: Open the glove compartment on the passenger side, pull down and remove any obstacles. Take out the old filter and insert the new one in the correct orientation. Be careful not to install it backwards to avoid airflow blockage. This simple process takes just 5 minutes, saving both time and hassle. Replace it every 10,000 kilometers or when odors appear - the air becomes fresher instantly.

Was this review help?
12
Share
Expand All
More Q&A

What is the actual fuel consumption of the 2018 Changan CS75?

The actual fuel consumption of the 2018 Changan CS75 is approximately 8.4 to 11.85 liters. The 2018 Changan CS75 features a five-door, five-seat SUV body structure with dimensions of 4650mm in length, 1850mm in width, and 1705mm in height. It has a wheelbase of 2700mm, front and rear track widths of 1565mm, a fuel tank capacity of 58 liters, and a luggage compartment capacity ranging from 520 to 1490 liters. The curb weight is 1625kg. The 2018 Changan CS75 is equipped with a MacPherson independent front suspension and a multi-link independent rear suspension. It is powered by a 1.5T turbocharged engine delivering a maximum horsepower of 178PS, a maximum power output of 131kW, and a maximum torque of 265Nm, paired with a 6-speed manual transmission.
101
Share

What is the actual measured fuel consumption of the Great Wall VV7?

The actual measured fuel consumption of the Great Wall VV7 is around 12 liters per 100 kilometers. Taking the 2021 Great Wall VV7 as an example, its body structure is a 5-door, 5-seat SUV with dimensions of 4760mm in length, 1931mm in width, and 1655mm in height. It has a wheelbase of 2950mm, a fuel tank capacity of 65 liters, a trunk capacity of 306 liters, and a curb weight of 1920kg. The 2021 Great Wall VV7 features a MacPherson independent front suspension and a multi-link independent rear suspension. It is equipped with a 2.0T turbocharged engine that delivers a maximum horsepower of 227 PS, a maximum power of 167 kW, and a maximum torque of 387 Nm, paired with a 7-speed dual-clutch transmission.
116
Share

What does roz/ron90-98 mean?

It represents the gasoline grade, indicating the octane rating range between 90 and 98 can be used. Relevant introductions are as follows: 1. Composition: Gasoline is composed of isooctane and heptane, and the proportion of isooctane is the actual octane rating of the gasoline. For example, the so-called 97-grade gasoline means isooctane accounts for 97% of the fuel composition, and heptane accounts for 3%. 2. RON: The value of RON/ROZ can directly reflect the compression ratio that the gasoline can withstand. When the gasoline quality is good, without impurities and other chemical substances that should not be contained, the RON value of gasoline is the most scientific, accurate, and commonly used standard to reflect the actual performance of gasoline.
107
Share

What is the actual fuel consumption of the Buick Envision 1.5t?

The actual fuel consumption of the Buick Envision 1.5t is approximately 8.9 to 11 liters per 100 kilometers. Taking the 2020 Buick Envision 1.5t as an example, its body structure is a 5-door, 5-seat SUV with dimensions of 4694mm in length, 1839mm in width, and 1686mm in height, with a wheelbase of 2750mm and a fuel tank capacity of 66 liters. The 2020 Buick Envision 1.5t features a front MacPherson independent suspension and a rear multi-link independent suspension. It is equipped with an inline 4-cylinder turbocharged engine, delivering a maximum horsepower of 169ps, a maximum power of 124kw, and a maximum torque of 250nm.
107
Share

What are the body dimensions of the Picasso?

The length, width, and height of the Picasso are 4287 mm, 1751 mm, and 1642 mm respectively, with a wheelbase of 2760 mm. Relevant information is as follows: The Picasso is equipped with two engines, one is a 1.6L naturally aspirated engine, and the other is a 2.0L naturally aspirated engine: 1. 2.0L naturally aspirated engine: The 2.0L naturally aspirated engine delivers 135 horsepower and a maximum torque of 190 Nm. This engine reaches its maximum power at 6000 rpm and its maximum torque at 4100 rpm. It features multi-point fuel injection technology and uses an aluminum alloy cylinder head and block. 2. 1.6L naturally aspirated engine: The 1.6L naturally aspirated engine produces 106 horsepower and a maximum torque of 142 Nm. This engine achieves its maximum power at 5750 rpm and its maximum torque at 4000 rpm. It also employs multi-point fuel injection technology and utilizes an aluminum alloy cylinder head with a cast iron cylinder block.
115
Share

What causes the Odyssey to have difficulty accelerating?

The reasons for the Odyssey's acceleration difficulty may include ignition system malfunctions, insufficient fuel injection, excessive engine carbon buildup, fuel system failures, engine system faults, or damage to the catalytic converter/turbocharger. Below are more detailed explanations: Specific causes: 1. Ignition system failure: Components like aging ignition coils or overdue spark plug replacement can cause insufficient ignition energy, poor combustion, weak engine acceleration, and illuminated engine warning lights. 2. Fuel system failure leading to low pressure: Insufficient fuel injection results in poor engine acceleration. 3. Excessive engine carbon buildup: This affects fuel atomization, leading to poor combustion, excessive emissions, and weak acceleration. 4. Engine system faults triggering emergency operation mode: This restricts engine power output, causing acceleration difficulties. Sensor failures (oxygen sensor, air flow meter, crankshaft position sensor, knock sensor, etc.) may trigger this mode. 5. Catalytic converter or turbocharger damage: In such cases, visit a repair facility for computer diagnostics to identify trouble codes and resolve the issue accordingly.
110
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.