How to Replace the Air Conditioning Filter in the Binyue?

[MacAaliyah]

The air conditioning filter in the Binyue is located in front of the glove compartment on the passenger side. To replace it, open and flip down the glove compartment, then remove the old filter and replace it with a new one. Below is some relevant information: 1. The air filter can absorb dust particles, reduce respiratory discomfort, minimize irritation for allergy sufferers, enhance driving comfort, and protect the air conditioning cooling system. 2. The Binyue is the first SUV model under Geely's BMA modular architecture, positioned as a compact SUV. Its body dimensions are 4330mm in length, 1800mm in width, and 1609mm in height, with a wheelbase of 2600mm. It is powered by a 1.5TD turbocharged engine.

[HaileyLynn]

I just replaced the cabin air filter on my Geely Binyue myself, it's located behind the glove box on the passenger side. First, you need to fully open the glove box. There are plastic clips on both sides - press them to completely remove the glove box. Then you'll see a rectangular cover with small clips on both sides, just gently squeeze them to remove the cover. Important: when removing the old filter, remember the direction of the arrow. The arrow on the new filter should point toward the front of the vehicle when installing. No tools are needed for the whole process, but be careful not to force the glove box clips as the plastic parts can break easily. After replacement, remember to test the air flow by turning on the AC. Last time I replaced mine, the airflow became weaker - turns out I installed the filter backwards and had to redo the whole process.

[McAlaina]

Changing the air filter requires both courage and attention to detail. I've been replacing it myself for my Binyue over the past two years. When removing the glove box, be careful to detach the damping rod on the left side - just press the small clip and twist gently to release it. The filter compartment is located behind the glove box, marked with an UP arrow on the black plastic cover. Make sure the arrow on the filter aligns with this mark. You can buy activated carbon filters online for just over 20 yuan, much cheaper than OEM parts. Never try to replace it without removing the glove box - that often leads to misaligned filters and dust leakage. After each replacement, I always wipe the blower fan blades. Even after three years, my car's AC system remains completely odor-free.

[DiFaith]

Open the glove compartment and locate the retaining clips on both inner walls. Press the left clip with your thumb and push outward, then do the same for the right clip—the entire glove box will drop down. You'll then see a rectangular filter cover; pinch the clips on both sides and pull to expose the old filter. Install the new filter with the activated carbon side facing up, ensuring the airflow direction arrow on the side points toward the driver's seat. The whole process takes just five minutes—keep a flashlight handy for better visibility. I replace mine every six months without fail before summer, otherwise, the AC blows a musty odor.

[CameronLee]

First, purchase a correctly sized filter element, preferably one with activated carbon for better odor removal. The filter compartment for the Bin Yue is located behind the glove box on the passenger side, which needs to be completely removed. Pinch the left and right limiters of the glove box and press down simultaneously to lower the entire box. Be careful to unhook a damping rod. The filter compartment cover is labeled AIR FLOW; remember its orientation when removing it to avoid incorrect reinstallation. When removing the old filter, ensure the dust-accumulated side faces downward. When installing the new filter, align the arrow toward the rear of the vehicle. Doing it yourself saves 80 yuan in labor costs. Wear a mask during the operation to prevent dust allergies.

[DiCharlotte]

The first step is to remove the glove compartment on the passenger side. Press both side clips simultaneously to detach it. The filter compartment cover has an upward arrow mark, and the arrow on the filter must align with it. It's recommended to choose an activated carbon filter, which can adsorb PM2.5. Ensure the air conditioning is turned off during the operation to prevent the blower from starting and stirring up dust. Replacing it once each in spring and autumn is most reasonable, and doing so before the rainy season prevents musty odors. Last time I changed it, I found leaves stuck in the old filter, no wonder the AC had a strange smell. After installing the new filter, run the AC at maximum fan speed for five minutes to blow away any floating dust from the installation before hitting the road.