How to Remove the Rearview Mirror of a Santana?
3 Answers
First, manually adjust the rearview mirror of the Guangzhou Honda Accord to its lowest position to expose the connection point between the mirror and the drive mechanism. Locate the semi-circular platform at the connection point between the mirror and the drive mechanism. Use a flat-head screwdriver to pry the mirror away from the drive mechanism. At this point, you will see the wiring harness connector of the rearview mirror. Simply unplug the wiring harness connector to complete the removal.
Removing the Santana rearview mirror is actually quite simple. I've done it myself a few times. First, prepare tools like a small screwdriver, and make sure the car is turned off with the battery disconnected to prevent accidents. Gently pry open the plastic cover of the mirror, being careful not to use too much force to avoid scratching the paint. Under the cover, there are securing screws; loosen them, and the mirror can be removed. When disassembling, pay attention to the wiring connector and gently disconnect it to avoid pulling it apart. The whole process takes just a few minutes, but beginners might make mistakes, like when I accidentally cracked the cover and had to spend money to fix it. Afterward, it's advisable to test if the newly installed mirror is secure by giving it a shake. Regular cleaning or replacement can improve driving visibility and safety, and don't forget to properly recycle the old parts.
I've tried removing the Santana's side mirror, here's my experience. After parking and turning off the engine, simply pry open the edge of the housing with your fingers or a small tool to locate the hidden screws and loosen them. Don't yank the mirror forcefully when removing it, as this might damage the clips. For models with lighting, just unplug the wiring connector. I once replaced mine with a customized mirror and found it totally worth it. The whole process is lightweight and requires only basic tools like household screwdrivers. Recommend laying down a cloth beforehand to catch debris - safe and hassle-free. When reinstalling, align properly and press firmly before testing. It's a satisfying DIY experience, just remember to check wiring stability to ensure night driving safety.
