How to adjust the high beam on Sylphy?

[VanElias]

Sylphy high beam adjustment method is: 1. Locate the high beam adjustment button on the lower left side of the steering wheel; 2. Turn on the high beam switch, manually rotate the knob upwards to raise the beam and downwards to lower it. High beams refer to adjusting the intensity of light based on filament distance during nighttime driving, which can improve visibility and expand the field of observation. The Sylphy is a compact sedan under Dongfeng Nissan. Taking the 2021 Sylphy as an example, its body structure is a 4-door, 5-seater sedan with dimensions of 4631mm in length, 1760mm in width, 1503mm in height, and a wheelbase of 2700mm.

[LillianaAnn]

I've been driving for over ten years, and operating the high beams on the Sylphy is actually quite simple. There's a lever behind the steering wheel on the left side. First, turn the headlight switch to the low beam position, and a green headlight indicator will light up on the dashboard. Then, push the entire lever toward the steering wheel until you hear a click, and the dashboard will display a blue high beam indicator, indicating that the high beams are on. On the highway, I usually keep the high beams on, but when I see oncoming traffic or am following another car, I pull the lever back to switch to low beams to avoid blinding others. The newer Sylphy models even have an automatic high beam function. Just turn on the 'auto' setting in the dashboard, and it will automatically switch between high and low beams based on road conditions at night, which is very convenient. However, during rainy or hazy days with poor visibility, it's best to switch manually.

[McBlakely]

When I first got my Sylphy, I also didn't know how to use the high beams. Later, I specifically studied it. After starting the vehicle, turn the light knob to the far right position with the headlight symbol - that's the low beam position. The high beam switch is at the top of the left-hand stalk on the steering wheel. Just gently push it forward with your finger to activate, and you'll see a blue indicator light on the dashboard. Using high beams at night significantly improves visibility, but remember to pull it back to low beam when meeting oncoming traffic, otherwise other drivers will flash their lights at you. If you're driving with high beams and see taillights getting close ahead, it means you're following too closely and should switch back immediately. This design is very user-friendly as you can operate it without taking your hands off the steering wheel.

[DelBrynlee]

Sylphy owner tells you how to operate the high beams: There's a rotatable ring on the light control stalk. First turn it to the headlight icon to activate low beams. Then push the stalk all the way forward to engage high beams. A blue light symbol will appear on the instrument cluster. New Sylphy models come with automatic switching function - front sensors detect opposing headlights and automatically switch to low beams, which is super convenient. This function can be toggled in the vehicle settings on the center display. Special reminder: Avoid prolonged high beam use during rainy nights as water mist reflections can actually reduce visibility. Also try to avoid using high beams in well-lit urban areas.

[WyattLee]

Here's a practical tip for you: When turning on the high beams in your Sylphy, you don't need to keep staring at the dashboard. After the headlights are on, simply push the control lever all the way toward the front of the car until you hear a crisp click sound, which indicates the high beams are activated. Pulling it back halfway activates the flashing reminder function for temporarily flashing high beams to alert pedestrians. There's a separate fog light switch on the left side of the steering wheel, so don't confuse it with the high beams. Importantly, avoid using high beams on well-lit urban roads at night, as police may issue fines for this. On highways, anticipate when to use high beams and switch back to low beams when you're about 200 meters away from the car ahead. It's also advisable to maintain low beams on suburban roads with street lighting.

[LeAnderson]

As an owner of the older Sylphy model, remember to follow three steps when operating the high beams. First, rotate the left knob to turn on the headlights, then push the entire lever forward firmly until it clicks. At this point, a distinct blue beam indicator will appear on the left side of the instrument panel. What new owners often overlook are the post-activation details: immediately switch to low beams when following closely behind red taillights, manually turn off high beams in tunnels, and avoid using them while searching for parking spots in residential areas. There's also a thoughtful design—a dedicated segmented switch on the left side of the steering wheel for flashing headlights. A gentle push activates the high beam flash, allowing you to alert vehicles ahead without switching modes.