···
Log in / Register

How Many Months or Kilometers is the First Maintenance for the Sylphy?

2Answers
DeCamila
08/28/2025, 01:04:37 AM

The first maintenance for the Sylphy is recommended at 1,000 kilometers or one month, whichever comes first. The initial 1,000 kilometers are considered the break-in period for the vehicle. During this period, it is advisable to wait until the engine coolant temperature reaches at least 40 degrees Celsius before starting to drive after a cold start. When starting, gently press and slowly release the clutch and accelerator pedal, and choose smooth roads for driving. The primary tasks during the first maintenance include changing the engine oil and oil filter, inspecting the doors and engine hood, checking if the lights are functioning properly, examining tire pressure, performing tire rotation, detecting any abnormalities in the tire pressure monitoring system, conducting wheel alignment and balancing, cleaning and inspecting the windshield and wiper blades, ensuring the throttle pedal operates smoothly, verifying the brake pedal's smooth operation, checking the parking brake operation, inspecting all components of the seat belt system, examining for any changes in steering conditions such as excessive play, heavy steering, or unusual noises, and confirming that all warning lights and buzzers are working correctly.

Was this review help?
106
Share
LeGia
05/09/2026, 06:24:48 AM

As a Sylphy owner who just went through the first maintenance, I found the 3-month or 5,000-kilometer milestone very important. That day, the 4S shop not only changed the engine oil but also performed over 20 free vehicle inspections. The after-sales manager suggested regular maintenance every six months after the first service, but the exact timing depends on driving conditions. Urban drivers in heavy traffic may need slightly earlier maintenance, while frequent highway drivers can delay it a bit. Remember to bring the purchase invoice and maintenance manual - missing records in the system might affect future warranty claims. After maintenance, I clearly felt the accelerator became more responsive.

Was this review help?
14
Share
Expand All
More Q&A

How to Use the Clutch and Brake in Subject 2?

During Subject 2, the clutch is used to start the vehicle, and the brake is used to stop the vehicle. Related introduction: 1. Clutch: The clutch is installed between the engine and the transmission, and it is the assembly component in the car's drivetrain that directly connects to the engine. Typically, the clutch is installed together with the engine crankshaft's flywheel group, serving as the component that cuts off and transmits power between the engine and the car's drivetrain. 2. Brake: The principle of braking is to convert the vehicle's kinetic energy into heat energy, which is then dissipated. The kinetic energy comes from the power provided by the engine, which requires fuel combustion to generate work. In other words, every time you press the brake, it means a little bit of gasoline is wasted.
112
Share

How to reset the maintenance light on a 2020 Geely Icon?

After turning on the ignition, simultaneously press the mode switch and the clock switch to reset the maintenance light. Below is a related introduction to the car maintenance light: 1. Function: The function of the maintenance light is to record the mileage of important components, similar to a timer in a sprint race, serving as a reminder for both the car owner and maintenance personnel. 2. Notes: If related parts are replaced without resetting the maintenance light, the corresponding car maintenance light will not be reset. Although not resetting the light after replacing related parts does not affect the vehicle's performance, it may cause inconvenience for future part replacements, as it would be difficult to accurately track the usage time of the new parts.
113
Share

What are the differences between the BMW M5 Competition and the M5?

The differences between the BMW M5 Competition and the M5 are as follows: 1. Exterior: The M5 Competition features more aggressive exterior styling kits compared to the M5, with some subtle differences in appearance between the two models. 2. Horsepower: The M5 Competition has 26 more horsepower than the M5, although both models use the same engine, transmission, and share identical chassis. 3. Engine: The BMW M5 is equipped with a 4.4-liter twin-turbocharged V8 engine, codenamed S63B44B. The standard M5's engine delivers 600 horsepower and a maximum torque of 750 Newton-meters, with peak torque available between 1,800 and 5,860 rpm.
107
Share

What are the scoring rules for Subject 3?

Subject 3 detailed scoring criteria are: 1. Vehicle preparation: The following rules apply: Failure to walk around the vehicle to inspect its appearance and surrounding environment results in disqualification; Failure to observe rear traffic conditions before opening the door results in disqualification. 2. Starting off: The following rules apply: Starting with insufficient brake air pressure results in disqualification; Starting with the door not fully closed results in disqualification; Failure to observe interior and exterior rearview mirrors or turn head to check rear traffic conditions before starting results in disqualification; Starting the engine with the gearshift lever not in neutral (parking gear) results in disqualification; Starting without releasing the parking brake and failing to correct promptly results in disqualification.
102
Share

What is the fuel consumption of the 2014 Haval H6 manual 1.5t?

2014 Haval H6 manual 1.5t has a fuel consumption of 9.64L/100km. Below is the relevant introduction of the Haval H6: 1. Power: Equipped with 1.5T and 2.0T engines. The 1.5T engine has a maximum power of 124kW and a peak torque of 285Nm; the 2.0T engine has a maximum power of 145kW and a peak torque of 355Nm. 2. Configuration: The 1.5T engine features CVVL technology. CVVL technology mainly adjusts the opening and closing time of the valves, valve lift, and duration, ensuring that the engine can obtain sufficient intake air under different working conditions, thereby improving the engine's efficiency.
112
Share

What is the difference between fuel consumption information A and B?

Here are the differences between fuel consumption information A and B: 1. Display method: Fuel consumption A displays average fuel consumption A on the instrument panel, while fuel consumption B displays average fuel consumption B on the instrument panel. 2. Fuel consumption calculation method: (1) Fuel consumption A: Calculates the average fuel consumption for a partial trip distance. (2) Fuel consumption B: Calculates the average fuel consumption for the total distance. 3. Function: (1) Fuel consumption A: Allows the driver to understand the fuel consumption information of the vehicle over a fixed distance. (2) Fuel consumption B: Allows the driver to understand the fuel consumption information under the overall driving conditions of the vehicle. The differences between the two are designed to better help drivers understand their driving conditions.
115
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.