···
Log in / Register

Do You Need to Tap the Brake When Going Straight at an Intersection in Subject 3?

6Answers
DelFrancisco
07/29/2025, 10:38:49 PM

During the Subject 3 driving test, when passing through a straight intersection, even if the traffic light is green, you need to tap the brake to slow down. Below is some information about the driver's license: 1. Introduction: A driver's license (full name: Motor Vehicle Driver's License), also known as a "driving license," is a document issued by the government transportation department to individuals who qualify to drive motor vehicles. It is usually a card, but electronic versions are also available. 2. Requirements for Holding: To obtain a driver's license, you must meet the minimum age requirement and pass the driving test. The driver's license typically specifies the types of motor vehicles the holder is permitted to drive. 3. Relevant Legal Basis: "Regulations on the Application and Use of Motor Vehicle Driver's Licenses."

Was this review help?
109
Share
LaKathryn
08/16/2025, 04:52:23 AM

Regarding the issue of tapping the brakes when going straight through an intersection, I only truly started paying attention to this after going through driver's license training. After driving for a long time, I've found that intersections are highly variable—pedestrians might dart out or electric bikes could appear suddenly. Tapping the brakes to slow down helps maintain a safe distance, preventing rear-end collisions or loss of control. During the driving test (Subject 3), examiners pay close attention to this small action because it reflects safety awareness; missing it could lead to point deductions or even failure. I've now developed the habit of lightly tapping the brakes whenever approaching an intersection, even at low speeds, and checking both sides. This isn’t just a test requirement—it’s a fundamental practice for protecting myself and others in daily driving. Since adopting this habit, my accident rate has dropped significantly, making driving much more relaxed.

Was this review help?
19
Share
Expand All
GabriellaDella
10/21/2025, 03:25:20 AM

During the days right after passing the third driving test, I truly understood the necessity of tapping the brakes at intersections. The instructor always emphasized that exam rules require slowing down and tapping the brakes when driving straight through an intersection, even if there are no cars or pedestrians, as this demonstrates your control over the vehicle speed. Through practice, I found that this technique makes the car more stable, avoids the risk of sudden braking, and allows extra time for observation. During the test, forgetting this step would result in severe point deductions from the examiner—I’ve seen people fail because of it. Later, when driving to work, I stuck to this habit, and the probability of accidents at intersections decreased significantly. Safety always comes first—nothing is more important than that.

Was this review help?
17
Share
Expand All
Dakota
12/04/2025, 02:52:52 AM

Let me share my personal experience: When driving straight through an intersection during the driving test (Subject 3), my instructor taught me to always tap the brake to slow down. This is because it's a requirement in the exam rules, and the examiner needs to see if you have safe driving awareness. After practicing repeatedly, I realized that tapping the brake isn't just procedural—it's crucial for speed control to avoid speeding or unnecessary risks. I maintain this habit in daily driving, making intersections much safer.

Was this review help?
19
Share
Expand All
JaxonMarie
01/24/2026, 09:28:19 PM

As an experienced driver, I believe tapping the brakes when going straight through an intersection is not an unnecessary move. It helps you slow down and maintain stability, especially during exams—missing it will make the examiner think you're careless. I recommend making it a habit to lightly tap the brakes every time you approach an intersection to check your surroundings. This is much better than trying to remedy the situation afterward. The key to the third driving test lies in safety control—small details determine success or failure.

Was this review help?
6
Share
Expand All
KadenAnn
04/20/2026, 03:14:12 AM

From the perspectives of safety and testing, tapping the brakes when going straight at intersections is crucial. I deliberately practiced this maneuver during my Category 3 driving test—slowing down made observation easier and helped avoid blind spot issues. In actual driving, this habit has reduced potential collisions and made journeys smoother.

Was this review help?
19
Share
Expand All
More Q&A

Is It Normal for a Car to Shake When the AC Is On?

It is not normal for a car to shake when the AC is on. Here are the reasons why the engine may idle roughly with the AC on: 1. Throttle body carbon buildup: For most electronic throttle bodies, the engine will automatically increase the throttle opening to draw in more air and thus increase power output. If the throttle body is not maintained for a long time, carbon buildup can easily form, obstructing the engine's air intake. This can make it difficult for the engine to drive the compressor, resulting in rough idling. Solution: Clean the throttle body. If you drive in harsh conditions, it's best to clean it regularly—recommended every 10,000 kilometers. 2. Excessive air intake: After cleaning the throttle body, if the original opening is maintained, the removal of carbon buildup can lead to excessive air intake, causing engine shaking during startup, poor acceleration, and engine warning light alerts.
105
Share

What is an Automotive Flange?

Flange plate, referred to as flange, is a general term. It usually refers to a disk-shaped metal body with several fixing holes around its perimeter for connecting other components. This part is widely used in machinery, resulting in various shapes and forms. As long as it resembles one, it's called a flange plate, with its name originating from the English word 'flange'. Below is additional information: Detailed introduction: Internationally, there are two main systems for pipe flange standards: the European pipe flange system represented by the German DIN (including the former Soviet Union) and the American pipe flange system represented by the ANSI pipe flange. In addition, there is the Japanese JIS pipe flange, but it is generally only used in public utilities within petrochemical plants and has relatively little international influence.
101
Share

What to Do If a Volkswagen Car Key Is Lost?

If both the car key and the spare key are lost, you can take the vehicle documents and your ID card to a 4S shop or service station to have a new key made. However, you will need to provide the 17-digit anti-theft code and the key blade number. Alternatively, you can choose to replace the entire car lock. Here is additional information: Solutions: If you cannot find the spare key and have no key to open the door, for convenience in the future, you can only ask the service station to replace the entire car lock. The cost of replacing the lock varies depending on the car model. Some models use the same key for the doors, trunk, and glove compartment. If you replace the entire car lock, more locks will need to be replaced, leading to higher costs. Therefore, it is recommended that car owners take good care of their car keys.
115
Share

What is the reason for the occasional inability to accelerate when pressing the throttle in the Ford Escort?

Ford Escort's inability to accelerate when pressing the throttle is generally caused by fuel line blockage, exhaust system failure, severe carbon buildup in the throttle body, or throttle pedal malfunction. Below are detailed explanations regarding the inability to accelerate: 1. Cause Introduction: When the car's fuel line system is blocked, especially if the fuel injector is clogged, fuel cannot be adequately transported, resulting in incomplete combustion within the engine cylinder. 2. Throttle Body Carbon Buildup: When a car has been driven for an excessive mileage without cleaning the engine throttle body, carbon buildup occurs, affecting fuel combustion and ultimately leading to reduced car power and increased fuel consumption.
117
Share

The Difference Between Shell Engine Oil 5w30 and 5w40

So the biggest difference between 5W-30 and 5W-40 engine oils is their viscosity at 100 degrees Celsius, with 5W-30 having better fluidity. This may be caused by insufficient oil volume or excessively high engine temperature. Here is some extended information about engine oil: 1. Increased fuel consumption: When adding engine oil, the oil level should be between the upper and lower limits on the dipstick. If too much oil is added, the oil volume will expand as the engine temperature rises, increasing pressure in the oil chamber and operational resistance, which can reduce vehicle power and increase fuel consumption. 2. Overfilling oil: If too much oil is added, the crankcase breather pipe may leak oil, and increased crankcase pressure can cause oil seals to loosen due to oil pressure, leading to oil leaks. 3. Heat dissipation: Overfilling oil can affect engine cooling.
108
Share

Does Water on the Vehicle Floor Affect the Car?

It is necessary to completely remove the floor and carpet, then dry the carpet in the sun and wipe the water off the floor. This will not affect the car. However, if the water under the carpet is not properly dealt with, the floor may rot over time. Failure to address water on the car floor can lead to rusting and mold growth of internal components. Below is an extended explanation: 1. Drain the water as soon as possible: If there is water inside the car, it should be drained immediately. There is a rubber drain plug at the bottom of the floor—remove it to drain the water. 2. Identify the source of the leak promptly: Check whether the car floor is deformed and if the surrounding rubber seals are damaged, then mark the affected areas. 3. Ventilate by opening covers: Remove internal items from the rear and open the covers to air them out for about an hour to prevent mold and rust.
103
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.