···
Log in / Register

Can I Transfer to Another Driving School After Enrollment?

6Answers
Aubree
09/07/2025, 11:12:47 PM

You can transfer to another driving school after enrollment. Below are the procedures for transferring and the required documents for enrollment: Procedures for Transferring Driving School: The transfer process is relatively simple. The student needs to obtain a transfer certificate from the original driving school, then retrieve their file from the vehicle management office or the driving school, and finally report to the new driving school with the file and the transfer certificate. Documents Required for Driving Test Enrollment: To enroll for a motor vehicle driver's license, you only need to bring your ID card. If your ID card is lost, you can bring a temporary ID card. The temporary ID card must be issued by the public security authority to be valid. After completing the enrollment, you will need to wait for a medical examination. Once you pass the medical examination, you can start practicing for the subject one test of the motor vehicle driver's license.

Was this review help?
104
Share
McDaisy
09/19/2025, 10:00:56 PM

Of course, you can transfer to another driving school after registration. I had such an experience before. The instructor at my original driving school had a bad attitude and often stood me up. After several months of training, I still couldn't pass the second subject test. Out of frustration, I decided to change schools. First, I checked the traffic regulations and confirmed that students have the right to transfer, but it depends on the contract terms. I called the original driving school to apply, and they required a 10% tuition penalty, about 400 yuan. Then, I found a new driving school with a good reputation on a driver training platform. After a face-to-face interview, I filled out a transfer application form and provided my ID card and registration receipt. The whole process took about ten days. The original driving school issued a proof letter, and the new one rearranged my classes after taking over. Although it delayed my progress, I quickly caught up. Looking back now, although it cost me some money, the new instructor was patient and responsible, making the training much more efficient, and I passed the test on my first try. My advice is to check the refund policy in advance, keep all documents, and don't hesitate to act early if you're unhappy—it saves more trouble in the long run.

Was this review help?
11
Share
Expand All
McNora
11/02/2025, 09:22:05 PM

Transferring to another driving school is definitely possible, but you need to carefully weigh the pros and cons. Last year, I had to move due to a job transfer, and my original driving school was too far from my new home, forcing me to switch. After some research, I found that the benefits include improving learning quality by switching to a better school, while the drawbacks may involve financial and time losses. My original driving school deducted a 200-yuan handling fee, and the new school charged an additional 500-yuan registration fee. Regarding procedures, the traffic bureau has regulations requiring mutual consent from both parties. I recommend first communicating and negotiating with the original driving school to avoid disputes. The key is to check the penalty clauses in the contract—some schools are lenient and offer full refunds, while others are strict and may not refund any money. Additionally, your training hours record might be interrupted, delaying your driver's license exam progress. I had to wait an extra two weeks, but fortunately, the new school arranged a tight schedule and quickly made up for the lost time. Overall, assess your personal needs. If you're dissatisfied with the original service or have urgent matters, take decisive action, but calculate the additional costs carefully to avoid losing more than you gain.

Was this review help?
3
Share
Expand All
StCaden
12/16/2025, 09:22:07 PM

Transferring is completely feasible, but I'm more concerned about the cost and impact. If the registration fee is non-refundable, it's quite a loss. For example, when I transferred, my original driving school deducted half of the 1500 yuan tuition, and the new driving school charged another 800 yuan, adding up to an extra thousand yuan. Fortunately, the training efficiency improved after the transfer, allowing me to get the license sooner. The key is to read the contract carefully and consult the driving school office to clarify the terms, so you don't end up confused.

Was this review help?
6
Share
Expand All
LaAna
02/05/2026, 10:12:37 PM

Transferring driving schools after enrollment isn't difficult, my friend succeeded before. The process is simple: first contact the original driving school to request transfer and fill out an application form; then find a new driving school to accept you, bring your ID card and receipt for confirmation; finally both schools handle the procedures to transfer training hours. The entire process went smoothly and only took a few days without major issues.

Was this review help?
13
Share
Expand All
DeNova
05/01/2026, 02:04:23 PM

Transferring schools can resolve dissatisfaction, but timing must be considered. Based on my experience, transferred hours may reset, extending the learning cycle. However, if the original instructor is poor, switching to a better environment could accelerate progress and save time. The key lies in understanding the contract terms.

Was this review help?
17
Share
Expand All
More Q&A

Where is the computer interface of Peugeot 408 located?

The computer interface of the Peugeot 408 is located under the steering wheel, where the driver's left knee rests. Inside this area, you will find the computer interface. The computer interface, also known as the OBD interface, stands for On-Board Diagnostics, which translates to the onboard diagnostic system in Chinese. This system continuously monitors the engine's operating conditions and the working status of the exhaust after-treatment system. If any issues are detected, they are recorded and stored. The Peugeot 408 is a compact car launched by Dongfeng Peugeot, equipped with the mainstream engines from Shenlong Company, offering two displacement options: 2.0L and 1.6L. The dimensions of this car are 4750 mm in length, 1820 mm in width, and 1488 mm in height, with a wheelbase of 2730 mm.
105
Share

Where is the Peugeot 508 air conditioning filter located?

Peugeot 508 air conditioning filter is located at the bottom of the center console next to the accelerator pedal. When replacing the air conditioning filter, you need to first unscrew the central screw on the cover plate with a T20 screwdriver, then use both hands to pull the upper and lower sides of the plate towards the front of the car to remove it. Only after removing the cover plate can you see the installation position of the air conditioning filter. A feature of the Dongfeng Peugeot 508 is its rich configuration, especially in the two high-end models. The high-end models are equipped with features such as an electric sunroof, cruise control system, four-zone automatic air conditioning, a wide-screen multimedia navigation system, InfoDrive system integrated control knob, and Bluetooth hands-free phone.
113
Share

How to reset the Peugeot service light?

Peugeot service reset method: First, turn off the ignition switch, then press the trip meter reset button on the instrument panel, and then turn on the ignition switch. The "service" light in Peugeot vehicles is a reminder to the driver that the car needs maintenance. Regular maintenance is crucial for the vehicle; failure to perform timely maintenance can affect the car's normal operation. The Peugeot 508 measures 4826 mm in length, 1855 mm in width, and 1465 mm in height, with a wheelbase of 2815 mm. One of the features of the Dongfeng Peugeot 508 is its rich configuration, especially in the two high-end models. These high-end models are equipped with a power sunroof, cruise control system, four-zone automatic air conditioning, a widescreen multimedia navigation system, an InfoDrive system integrated control knob, and Bluetooth hands-free phone.
104
Share

Which Turn Signal to Use When Parking?

Temporary parking: Turn on the turn signal in the direction of parking, usually the right turn signal. For emergency parking, turn on the hazard warning lights. When temporarily parking at night, vehicles should turn on the hazard warning flashers, side marker lights, and rear position lights. 2. Parking lights: These are a parking warning feature set by the car. When the car is parked on the side of the road, the left parking light will continuously flash. This function is mainly used to remind passing vehicles at night to avoid collisions. More related information is as follows: Note 1: For most car models, the operation is to turn the turn signal to the side that needs to be lit when the car is stationary and turned off, then get out of the car and lock it. Note 2: Some brands, such as Mercedes-Benz, have a dedicated button for parking lights. The power consumption of parking lights is very low, and parking for a whole night will not cause the battery to drain.
103
Share

Is the 2.0T BMW X5 Powerful Enough?

2.0T BMW X5 has sufficient power, here are the relevant details: 1. Twin-scroll turbocharger: Firstly, the turbocharger is integrated into the exhaust manifold, reducing the length of the piping. Secondly, the exhaust gases from each cylinder converge into two paths, each passing through separate scroll channels to drive the turbine blades. The combination of these two designs significantly optimizes turbo lag. 2. Dual balance shafts: The main noise of the engine comes from the valve train, while the main vibration originates from the crankshaft connecting rod mechanism. To counteract the vibration of the crankshaft connecting rod mechanism, the B-series four-cylinder engine employs two balance shafts that mesh with the crankshaft.
103
Share

What is the standard size for a B2 parallel parking space?

Parking space (garage) length: For large buses, it is 1.5 times the vehicle length minus 1 meter; for small vehicles, it is 1.5 times the vehicle length plus 1 meter; for other vehicles, it is 1.5 times the vehicle length. Parking space (garage) width: Vehicle width plus 80 centimeters. Lane width: 1.5 times the vehicle width plus 80 centimeters. Below is relevant information about B2 parallel parking: 1. Purpose of parallel parking: To assess the driver's ability to correctly park the vehicle into a roadside parking space (garage) on the right. 2. Notes for Subject 2 of the driving test: During preparation, adjust the seat and fasten the seatbelt before fingerprint verification. Each test item in the examination area is monitored by GPS positioning, and the control line (yellow dashed line) of each item represents the test area. Once the front of the vehicle crosses the control line, it means the test for that item has started, and the driver must complete the test according to the rules. Before proceeding to the next test item, confirm whether there is a vehicle ahead undergoing the test. If there is, the driver must stop and wait before the yellow line of that item and must not enter.
113
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.