···
Log in / Register

Can I take Subject 4 after passing Subject 2?

6Answers
Gabriella
09/08/2025, 10:53:33 PM

You cannot take Subject 4 after passing Subject 2; you must pass Subject 3 first. Below is the relevant information: Driver's license examination process: Enroll at a driving school and provide the required documents. Undergo a physical examination to assess your health condition. Take the Subject 1 theory test. After passing, proceed to the Subject 2 field test. Upon passing Subject 2, take the Subject 3 road test. Note that the order of Subject 2 and Subject 3 tests can be swapped. After passing both Subject 2 and Subject 3, you can take the Subject 4 safe and civilized driving test. Once all tests are passed, you will receive your driver's license. Important notes: Prepare thoroughly before each test. Cheating or bribery is strictly prohibited throughout the examination process. Follow the examination rules and the instructions of the invigilators. Take care of public property and examination facilities. Stay focused and calm during the test, avoiding carelessness and nervousness.

Was this review help?
104
Share
LaJackson
09/20/2025, 03:46:10 AM

I just finished the second driving test subject, and all I can think about is getting my driver's license as soon as possible. So I was curious if I could skip straight to the fourth subject. After asking my driving school instructor, I found out—no way! The order of the driving test is fixed: you must first pass the third subject, the road test, which assesses actual driving skills, before you can take the fourth subject, the safety and civics knowledge exam. Skipping the third subject means missing crucial skill training, which could make the knowledge in the fourth subject feel disconnected. My advice is to stay calm, focus on practicing for the third subject, and only prepare for the fourth part after passing it—safety comes first, after all. Though the process can't be rushed, taking it step by step is the most reliable approach.

Was this review help?
14
Share
Expand All
ColtonAnn
11/03/2025, 03:09:15 AM

When it comes to driving test arrangements, I often help students with their questions. In the standard process, you cannot sign up for Subject 4 right after completing Subject 2. You must first pass Subject 3, the actual road test, to prove you can drive, and only then will you be eligible for Subject 4. Subject 4 is a theoretical review covering safety rules and emergency handling, which is difficult to fully grasp without real driving experience. Don’t worry about rushing—practicing the road test is key. As you make progress, check your local driving test policies; some regions allow you to sign up for Subjects 3 and 4 together, but don’t expect to skip stages.

Was this review help?
4
Share
Expand All
McSamantha
12/17/2025, 03:09:18 AM

I'm currently learning to drive. After passing Subject Two, I thought I could go straight to Subject Four, but I found out that the rules don't allow it. The driving test steps are: after completing Subject One and Subject Two, you must pass the Subject Three road test before you can take Subject Four. Subject Four is equivalent to an advanced safety knowledge test, and it's hard to apply well without actual driving experience. You need to practice driving honestly and pass Subject Three first; don't try to skip steps on your own.

Was this review help?
1
Share
Expand All
RyanRose
02/06/2026, 09:05:52 PM

During my driving lessons, I carefully studied the process. After passing Subject 2, you cannot directly take Subject 4. You must first pass Subject 3, the road test, because these two are connected: Subject 3 enhances driving skills, while Subject 4 tests safety and civilized awareness. Skipping would result in incomplete learning. Although there are minor variations in some regions, most places strictly follow this sequence. Take your time to master Subject 3, and preparing for Subject 4 will be smoother afterward.

Was this review help?
20
Share
Expand All
ThomasRose
05/02/2026, 12:42:24 PM

As a student, I was excited for days after passing the second driving test, wondering if I could quickly take the fourth test to get my license sooner. Upon asking, the driving instructor explained that it's not possible: the fourth subject must be taken after the third subject, otherwise, you haven't even proven your basic driving ability, and the safety knowledge test would be in vain. Focus on honing your road test skills and proceed step by step—that's the smartest approach; don't rush for quick success, being steady is the right way.

Was this review help?
7
Share
Expand All
More Q&A

What is the actual fuel consumption of the Magotan 330?

The Magotan 330 has three models currently on sale: the 2020 Magotan 330TSI DSG Premium, Luxury, and Leading models, all equipped with a 186-horsepower engine, with an NEDC fuel consumption of 6.3L per 100km. All Magotan 330 models have the same fuel tank capacity. The distance that can be covered on a full tank of fuel is as follows: For models equipped with the 186-horsepower engine, the fuel tank capacity is 66L, and the distance that can be covered on a full tank is 66/6.3*100=1048km. The fuel consumption of a car is directly related to five major factors: driving habits, the car itself, road conditions, natural wind, and environmental temperature. Specific factors that can increase fuel consumption are as follows: Driving habits: Aggressive driving, such as sudden acceleration, frequent overtaking, and not easing off the throttle before a red light, can increase fuel consumption. The car itself: Cars with larger engine displacements generally consume more fuel than those with smaller displacements because larger displacements usually mean higher power output, requiring more gasoline for combustion. Heavier cars also consume more fuel because greater weight requires more driving torque. Road conditions: Driving on dirt roads, muddy roads, soft surfaces, or mountainous roads increases resistance and fuel consumption. Natural wind: Driving against the wind or on windy days increases the car's resistance, leading to higher fuel consumption. Low environmental temperatures: When the engine block is cold, the injected gasoline does not atomize easily during cold starts, requiring more gasoline to be injected for combustion, which increases fuel consumption. Additionally, in low temperatures, the engine's computer may control the engine to run at higher RPMs to warm up, further increasing fuel consumption.
115
Share

How to Identify Axles?

The axle is the bearing that connects two wheels, also known as the wheel axle. Each pair (front and rear) of tires is essentially connected by an axle, and the number of axles refers to the count of these connecting bars. A single-axle vehicle has only one axle, meaning it has just one pair of tires (two tires). In daily life, most common passenger cars have four tires, with each pair connected by one axle, so the number of axles in a passenger car is two. The number of axles is primarily applied to cargo trucks, military vehicles, special-purpose vehicles, or a few large buses.
107
Share

What does the speed rating of vehicle tires mean?

Vehicle tire speed rating refers to the maximum speed at which a tire can carry a specified load under defined conditions. Below is a detailed introduction to the specifications of car tires: 1. Specification model representation: Tires are important components of a car, and there are many specification models for tires, with different models suitable for different types of vehicles. The specification model identification is usually on the sidewall of the tire, represented by a series of alphanumeric characters, corresponding to the tire's tread width, aspect ratio, type, rim size, load index, and speed rating. 2. Speed rating: Depending on the maximum speed they can withstand, tire speed ratings can be divided into different grades from A to Z, with grade A further subdivided into eight different grades from A1 to A8. The further back the letter representing the tire speed rating is in the alphabet, the better the tire's performance.
111
Share

Can a car with a full body kit pass the annual inspection?

If the full body kit modification has been registered with the vehicle management office, it can pass the annual inspection. Without registration, it will not pass. Any changes to the vehicle's body color, model, performance, purpose, or structure, as well as replacements of the frame, body, or engine, require an application for modification registration with the vehicle management office. Body kits are categorized into small and full kits, and since they alter the car's appearance, they must be registered with the vehicle management office. Otherwise, the vehicle may be subject to traffic police penalties or fail the annual inspection. Vehicles under the following circumstances must undergo the necessary procedures before being inspected: discrepancies between the vehicle's condition and the records in the driving license or archives; damaged, incomplete, or illegible license plates or driving licenses, or self-made license plates; modifications, model changes, or technical alterations without approval and modification procedures; failure to display the unit name and enlarged license plate characters as required; improper installation of alarms or indicator lights; or failure to pay road maintenance fees and insurance as required.
119
Share

What Causes Steering Wheel Shaking When Braking at 120 km/h?

Here are the specific reasons for steering wheel shaking when braking at 120 km/h: 1. Wheel balance issue: A car wheel consists of a tire and a rim. When there is a problem with the wheel balance, it means the wheel is not in a balanced state during high-speed driving. If the wheel balance data is incorrect, the wheel's rotation center will shift, causing the wheel to shake, which in turn affects the steering wheel. 2. Rim problem: If the car's rim has been impacted during previous driving, causing it to deform. Due to the deformation of the rim, the wheel may shake during driving, leading to steering wheel shaking. 3. Chassis component issue: This usually occurs in cars with poor post-accident repairs. Due to the impact during the accident affecting the chassis components, steering wheel shaking may also occur.
110
Share

What is the displacement of the Honda Civic Type-R?

The all-new Civic Type-R is equipped with a 2.0T engine, delivering a maximum power output of 320 horsepower. Below are details about the Type-R: 1. Exterior Design: The Type-R concept car features aerodynamic body kits, with an extremely aggressive front fascia and an exaggerated rear spoiler. The quad exhaust layout highlights its distinctive identity. 2. Performance: The new model is expected to be powered by a 2.0T turbocharged engine, producing a maximum power of 310 horsepower and a peak torque of 400Nm. It is paired with a 6-speed manual transmission and adopts front-wheel drive. This high-performance Civic can accelerate from 0-100km/h in 5.7 seconds. Currently, Chen Binbo, Vice President of Dongfeng Honda, is in discussions with Honda Japan regarding its introduction. If introduced in the future, the maximum power of this new model might be adjusted down to 191kW (260 horsepower).
112
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.