···
Log in / Register

Can I cancel the reservation one day before the Subject 2 test?

1Answers
JohnDella
09/08/2025, 10:48:21 PM

You can cancel the reservation one day before the Subject 2 test. Below is relevant information about Subject 2: Introduction: Subject 2, also known as the small road test, is part of the motor vehicle driver's license assessment and refers to the field driving skills test. Subject 2 test items for small vehicles (C1/C2): Include five mandatory tests—reverse parking, parallel parking, stopping and starting on a slope, right-angle turns, and curve driving (commonly known as S-curve) (some regions also include a sixth item: highway card collection). Subject 2 test items for large vehicles (A1/A2/A3/B1/B2): Include pile test, stopping and starting on a slope, parallel parking, single-plank bridge crossing, curve driving, right-angle turns, limited-width gate passing, continuous obstacle passing, bumpy road driving, narrow road U-turns, as well as simulated highway driving, continuous sharp turns on mountain roads, tunnels, rain (fog) conditions, slippery roads, and emergency handling.

Was this review help?
120
Share
More Q&A

Will Points Be Deducted for Automatic Turn Signal Return?

For automatic turn signal return, no points will be deducted if it is turned on promptly. Below is the relevant introduction to the Subject 3 driving test: 1. Test Regulations: The specific subjects of the Subject 3 test are road driving skills and safety and civilized driving knowledge. Each subject has a maximum score of 100 points, and a score of 90 or above is required to pass. 2. Study Hour Regulations: Subject 3 consists of a total of 40 study hours, including 16 hours of theory, 4 hours of simulated driving, and 20 hours of practical driving. According to the teaching syllabus, study hours are recorded cumulatively, with each student allowed to log a maximum of 4 study hours per day.
118
Share

How to Adjust the Seats in Qoros 5?

To adjust the seats in Qoros 5, press the adjustment button located on the side of the seat near the door. The Qoros 5 is a compact 5-door, 5-seat SUV with the following body dimensions: length 4600mm, width 1869mm, height 1658mm, and a wheelbase of 2710mm. It has a fuel tank capacity of 55 liters. The Qoros 5 is equipped with a 1.6T turbocharged engine and a 7-speed dual-clutch transmission, delivering a maximum power of 145 kW and a maximum torque of 290 Nm. It features front-wheel drive, with a front suspension using MacPherson independent suspension and a rear suspension using multi-link independent suspension.
103
Share

What are the reasons for the ABS light in the Citroen C-Quatre to illuminate?

Citroen C-Quatre ABS light illuminates due to the following reasons: 1. When the vehicle speed exceeds 10 km/h, the speed signal is not transmitted to the ABS control unit; 2. When the vehicle speed exceeds 40 km/h, the speed signal exceeds the tolerance value; 3. There is a recognizable open circuit or short circuit to the positive or ground in the sensor. Solutions for the Citroen C-Quatre ABS light illumination: 1. Check for poor contact or damage in the wiring and connectors; 2. Inspect the installation gap, position, and contamination of the wheel speed sensor and toothed ring; 3. Avoid high-speed driving and sudden braking; 4. Adjust the wheel bearing clearance to the normal value.
120
Share

Do Automatic Transmission Cars Need to Depress the Clutch?

Automatic transmission cars do not have a clutch, so there is no need to depress the clutch pedal. Here is an introduction to the clutch: Function of the Clutch: The clutch acts like a switch, engaging or disengaging the power transmission. The clutch mechanism allows the driving part and the driven part to temporarily separate and gradually engage, and they may also rotate relative to each other during the transmission process. There must be no rigid connection between the driving and driven parts of the clutch. All types of vehicles have a clutch device, but they vary in form. Classification of Clutches: Clutches can be divided into four types: electromagnetic clutches, magnetic particle clutches, friction clutches, and hydraulic clutches.
116
Share

Where is the Reverse Gear Position in a Manual Transmission?

Manual transmission reverse gear positions vary by specific vehicle model: 1. For most standard vehicles, the manual transmission reverse gear is located at the bottom right corner; 2. In Santana and Buick models, the manual transmission reverse gear is positioned at the bottom left corner. Manual transmission vehicles utilize a manual gear-shifting mechanical transmission system to regulate speed, where the driver manually moves the gear lever to alter gear engagement positions within the transmission, thereby changing gear ratios to achieve speed variation. Manual transmission gears are categorized as follows: 1. First gear is the starting gear, used when initiating vehicle movement; 2. Second gear serves as the passing gear; 3. Third gear functions as the transition gear; 4. Fourth gear operates as the cruising gear; 5. Fifth gear is designated as the high-speed gear.
114
Share

Does a cracked tire need to be replaced?

Tires with cracks need to be replaced. Below are the criteria for determining when a tire should be replaced: 1. Small-scale cracking: It is generally acceptable to continue using the tire. However, if the cracking is extensive and covers almost the entire tread, replacement is necessary. Not only does this affect the comfort level of the tire (noise reduction), but it also significantly reduces the tire's grip performance, posing a certain danger while driving. 2. Tire wear level: Almost every tire has a wear indicator. For passenger car tires, the wear indicator height is typically 1.6 millimeters (this is also the legal minimum tread groove depth), while for load-bearing tires, it is 2.4 millimeters. If the wear indicator is flush with the tread, it means the tire is nearly worn out and should be replaced promptly.
114
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.