Installing the TROY LIGHTING F6907 Huxley LED 18 Inch Tidepool Bronze Pendant Ceiling Light involves several steps to ensure a safe and proper setup. First, prepare the fixture by removing all parts from the box and verifying that everything is included. Then, proceed with the installation: Attach the heavy-duty strap to the junction box, ensuring the green side faces the floor. Next, thread the collar loop onto the fixture and secure it with a hex nut onto the heavy-duty strap. Position the canopy over the collar against the ceiling, ensuring about 1/4 inch of threads extend beyond the canopy, and tighten the hex nut. Open the chain's end links and connect them to the collar loop. Insert the lead wire into the stem and hang the fixture at your preferred height. Measure 6 inches of lead and ground wire beyond the top of the chain, cut off excess wire, strip the insulation, and insert these wires into the outlet box. Connect the ground wire to the green or bare copper wire in the outlet box and connect the fixture's hot wire to the outlet box's hot wire using an approved fastener. Connect the fixture's neutral wire to the neutral wire in the outlet box. Slide the canopy up the chain and secure it with the threaded ring. Finally, install the recommended 15W type-A lamp, making sure not to exceed the recommended wattage. Once you've completed these steps, restore power to the circuit breaker or fuse box. Following these steps carefully will help you successfully install your TROY LIGHTING Huxley LED pendant light.
