Setting up your BrosTrend AC1200 Dual Band WiFi Extender Ethernet to WiFi Adapter is straightforward. Here's a step-by-step guide:
-
Power Up the Extender: Plug the BrosTrend extender into a power outlet near your existing Wi-Fi router.
-
Extend Your Wi-Fi Network via Web Interface:
a. Connect to the Extender: On your Wi-Fi enabled device (phone, laptop, etc.), connect to the extender's Wi-Fi network. It's usually labeled "BrosTrend_EXT". Make sure to turn off mobile data on your device.
b. Access the Setup: Open a web browser and enter "re.brostrend.com" or "192.168.0.254" in the address bar. You'll be prompted to create a login password for future access.
c. Configure Wi-Fi Extension: On the quick setup page, select the Wi-Fi network (SSID) you want to extend, and enter your existing network's password. Wait for the "Extended Successfully!" confirmation.
-
Position the Extender for Optimal Performance:
a. Placement: Unplug the extender and move it to a location roughly halfway between your Wi-Fi router and the area where you need better Wi-Fi coverage.
b. Signal Check: Plug the extender back in. Wait for the Signal LED to illuminate. A solid blue light indicates a strong connection to your router.
c. Connect Your Devices: Connect your Wi-Fi devices to the extended network. These networks will have the same name as your existing network, with suffixes like "_EXT" or "_SGEXT". Use your existing Wi-Fi password to connect.
-
Using the Extender as an Ethernet to Wi-Fi Adapter:
a. Connect Wired Devices: Use an Ethernet cable to connect a device (e.g., smart TV, game console) to the Ethernet port on the BrosTrend extender.
b. Configure Device Settings: On the wired device, set the IP Address and DNS server settings to "AUTO OBTAIN".
If you have any trouble during setup, check the FAQs in the BrosTrend AC1200 manual or visit the BrosTrend website for further support.
