Setting up the iBs-BB-A100 BLE Beacon for production involves a few key steps to ensure optimal performance and compliance. Here's a straightforward guide: First, securely mount the beacon to a wall using four M3 screws. Next, connect the beacon to your computer using an M12 to USB cable. Windows 7 users will need to install a specific driver. To do this, open "Device Manager", locate "LSCM BLE Device", right-click, and select "Update Driver Software". Browse to the USB-driver-for-win7 folder (as specified in the software requirements) to install the driver. Following driver installation (if applicable), identify the COM number associated with "USB Serial Device". Launch the configuration program and click "Scan" to find devices. Select the correct COM number from the dropdown, and click "OK" after successful connection. Within the configuration program, adjust the settings. Change the Tag ID to a unique 4-byte hex value, set the packet format to "Eddystone format", and select "High only" for the power mode. Apply the changes by clicking "Send". Remember to adhere to FCC guidelines for operation and interference prevention. Also, maintain a minimum distance of 20cm between the beacon's radiator and your body to comply with RF exposure regulations. By following these steps, you can effectively configure your iBs-BB-A100 BLE Beacon for reliable performance in a production setting.
