Installing the TROY LIGHTING B5421 McCoy Wall Light involves several steps. First, prepare the fixture by removing all parts from the carton and verifying that everything is included. Next, install the fixture: Thread the two longest screws into the mounting ring from the back, ensuring the green ground screw faces forward, and attach the ring to the outlet box. Use small hex nuts to adjust the screws, extending them about 3/16 inch beyond the fixture's back, and lock the nuts against the crossbar. Connect the ground wire to the green or bare copper wire in the outlet box or to the green screw on the crossbar, never to the black or hot wire. Connect the white fixture wire to the white outlet box wire using a wire nut, securing it with electrical tape. Similarly, connect the black fixture wire to the black outlet box wire. Fasten the fixture back plate to the outlet box using the provided set screws and sealing washers. Install the shade onto the fixture using the socket ring. Finally, install a recommended Max 60-watt type A lamp, not exceeding the specified wattage. After installation, restore power to the circuit at the breaker or fuse box. For safety, ensure the fixture is mounted on a correctly installed standard round or octagon box securely attached to the building structure. Use the provided crossbar and hardware for proper alignment. Verify the wiring polarity, especially in older buildings. Always follow all safety instructions and warnings in the manual to prevent fire, shock, or injury.
