How do I adjust the height on the LAVEX 257WB3048S Steel Table Top Work Table

[DeElliott]

Adjusting the height of your LAVEX 257WB3048S Steel Table Top Work Table is straightforward. Here's a step-by-step guide: First, insert an adjusting foot (part A) into a step rivet on one of the leg frames (part B). Select your preferred height and secure the foot with a nylon rivet (part C). Next, repeat this process to install all four adjusting feet. Then, attach the lateral channel bracing (part D) to the leg frames using the screws (part E) and nylon lock nuts (part F). After that, carefully flip the table upside down on a protected surface. Begin installing the middle support bars diagonally, rotating them to align the holes, and secure them with the hardware provided. Finally, slide the remaining two support bars into place at the ends of the tabletop, aligning their holes. Do not install the end pieces yet. Flip the tabletop over onto the assembled legs, aligning the three holes from the tabletop, support bars, and legs, and secure them with the appropriate hardware. Following these steps will allow you to customize the height of your LAVEX 257WB3048S Steel Table Top Work Table for the best possible use.