···
Log in / Register

is a 1972 d silver dollar worth anything

1Answers
StCaroline
12/01/2025, 03:43:05 AM

Hello there! That's a great question about the 1972 Eisenhower dollar. It's a very common point of confusion for this particular coin.

The provided search result snippets unfortunately don't contain the specific details needed, but I can certainly help based on general coin knowledge.

The value of your 1972 dollar depends entirely on its mint mark. A 1972 dollar with a "D" on it was minted in Denver and is not made of silver. These coins were intended for general circulation and are composed of a copper-nickel clad. Because of this, a circulated 1972-D Eisenhower dollar is typically worth only its face value of one dollar. If it's in pristine, uncirculated condition, a collector might pay a few dollars for it.

However, the U.S. Mint did produce special collector's versions of the 1972 Eisenhower dollar that do contain silver. These were struck at the San Francisco mint and have an "S" mint mark. The 1972-S dollars are made of 40% silver. Their value is primarily based on their silver content, which means they are worth significantly more than face value, with the exact amount fluctuating with the daily price of silver.

So, to determine your coin's value, the first thing to do is check for the mint mark on the front (obverse) side, just below Eisenhower's neck. If you see a "D," it's a non-silver coin worth about a dollar. If you see an "S," you have a 40% silver coin worth much more

Was this review help?
120
Share
More Q&A

How do I update the user code on my Roger Technology H85/TDS Keypad Selector?

To modify the user code on your Roger Technology H85/TDS Keypad Selector, follow these steps: Storing a New User Code: Begin by entering the existing user code to enter the programming mode. Enter 0000 . The red LR LED should illuminate. Input your new user code (for instance, 12345) followed by ##. A successful entry will be indicated by the green LV LED lighting up for 2 seconds and a corresponding buzzer sound. Activating the New User Code: Enter the stored user code (e.g., 12345) followed by an asterisk (*). If the code is correctly stored, the green LV LED on the keypad will light up. Press and hold the enabled key or channel associated with the user code. For example, if you have channel B enabled, you would enter: 12345*B. Deleting a User Code: Determine the user code you want to remove (e.g., 12345). Enter ##12345*. If successful, the red LR LED will blink and then stay on steadily. Changing the Password: To change the password from the default (0000) to a new code, such as 12345: Enter **0000# (red LR LED lights up). Then, enter your new password (e.g., 12345) followed by ##. Resetting to Factory Default Password: If you've forgotten your password, you can reset it to the factory default (0000) using a known user code: Enter **12345# (red LR LED lights up). Enter 0000# to reset the password. Always consult the Roger Technology H85/TDS Keypad Selector manual for complete instructions and safety guidelines. If you run into issues, refer to the troubleshooting section in the manual for assistance.
104
Share

How to Wire and Install the Kichler 37531 Zagara 3-Light Vanity?

Installing the Kichler 37531 Zagara 3-Light Vanity requires careful attention to detail for safety and proper function. Here's a step-by-step guide: Mounting Bracket Setup: Position the mounting bracket (B) so its raised center section goes into the outlet box. Use long machine screws (DD) through the bracket (B), and attach it to the outlet box with short machine screws (BB). Wiring Connections: Ground Wire: Wrap the ground wire from your outlet box around the ground screw on the mounting bracket (B) and tighten the screw securely. Supply Wires: Connect the white (neutral) supply wire to the white (neutral) fixture wire. Connect the black (hot) supply wire to the black (hot) fixture wire. Fixture Assembly: Thread the rods (F) onto the exposed threaded pipe (G). Repeat for all remaining rods. Place the canopy (A) over the long machine screws (DD) and secure it using lock washers (EE) and threaded knobs (CC). Place the shades (E) over the sockets (D) and secure them with socket rings (C) using the provided wrench (FF). Bulb Installation: Insert three bulbs (60-watt max., medium-base incandescent or LED/CFL equivalent) into the sockets. Final Checks: Note that the fixture can be installed with the sockets facing either up or down, depending on your preference. Avoid over-tightening the socket rings when attaching the shades. This could damage the fixture. Always consult the Kichler 37531 Zagara 3-Light Vanity's instruction manual for detailed diagrams and safety information. If you experience any issues during installation, contact Kichler customer service for assistance.
114
Share

How can I safely and correctly use the Westfalia 93 78 00 Wood Splitter?

Operating your Westfalia 93 78 00 Wood Splitter safely and effectively is paramount. Always consult the official instruction manual for comprehensive details. Here's a summary of key safety precautions and operational steps: Safety First: Carefully read and understand the entire instruction manual before use. Properly dispose of all packaging materials to eliminate potential hazards, particularly for children. This wood splitter is not intended for use by individuals with physical, sensory, or mental impairments unless under the direct supervision of a qualified person. Wear appropriate attire – avoid loose clothing, jewelry, and ensure long hair and gloves are kept away from moving parts to prevent entanglement. If the wood splitter is damaged in any way, immediately stop using it. Seek professional repair or contact Westfalia customer service; do not attempt repairs yourself. Operating Your Wood Splitter: The splitting cone on your Westfalia 93 78 00 Wood Splitter is designed to work with battery-powered screwdrivers and power drills that have adjustable chucks. Position the cone firmly against the area of the wood you wish to split. Activate your power drill or battery-powered screwdriver to initiate the splitting process. The cone will penetrate the wood, effectively splitting it. By following these guidelines, you can ensure a safe and efficient experience with your Westfalia 93 78 00 Wood Splitter.
115
Share

How do I add and configure extra wireless sensors for my NATIONAL GEOGRAPHIC VA Colour RC Weather Station?

Adding more sensors to your NATIONAL GEOGRAPHIC VA Colour RC Weather Station is easy. Here's how to connect and set up additional wireless sensors, based on the instruction manual: First, for each sensor you wish to add, start with channel selection. Remove the battery compartment cover of the wireless sensor. Locate the channel selection switch and set it to the desired channel. Options include CH1, CH2, and CH3. Ensure each sensor is set to a different channel to avoid interference. If you're only using one additional sensor, set it to CH1. After setting the channel on the sensor, replace the battery compartment cover. On your weather station, press and hold the CHANNEL button for approximately 3 seconds. This action resets the values and initiates a search for the wireless sensor's radio frequency (RF) signal. By following these steps, you can successfully integrate multiple sensors and monitor various locations with your NATIONAL GEOGRAPHIC VA Colour RC Weather Station.
109
Share

What's the best way to clean the tempered glass doors on my Habitat Morillo 2 Door Glass Display Cabinet Blue?

To keep the tempered glass doors of your Habitat Morillo 2 Door Glass Display Cabinet Blue looking their best, gentle cleaning is key. The instruction manual recommends using a damp cloth with plain water or a glass cleaner specifically designed for this purpose. Be sure to avoid harsh, abrasive cleaning products, as these can scratch the glass and damage its surface. After cleaning the glass, always wipe it dry with a clean cloth to prevent streaks and maintain a clear, pristine appearance. Proper care will help preserve the beauty of your display cabinet for years to come.
118
Share

How should I clean the tempered glass doors on my Habitat Morillo 2 Door TV Unit Blue?

To keep the tempered glass doors of your Habitat Morillo 2 Door TV Unit Blue looking their best, follow these simple cleaning steps. First, gently wipe the glass with a damp cloth, using either plain water or a glass cleaner. Be sure to avoid furniture polish or any abrasive cleaning products, as these could potentially scratch the glass surface. Once you've cleaned the doors, dry them thoroughly with a clean cloth to prevent any water spots or streaks from forming. Always handle the glass doors with care to prevent damage. Should you notice any chips or breaks, discontinue use of the product immediately. Regular cleaning will help preserve the appearance and extend the life of your Habitat Morillo 2 Door TV Unit Blue.
116
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.