How to Wire and Install the Kichler 37531 Zagara 3-Light Vanity?

[Ariana]

Installing the Kichler 37531 Zagara 3-Light Vanity requires careful attention to detail for safety and proper function. Here's a step-by-step guide:

1. Mounting Bracket Setup:

   • Position the mounting bracket (B) so its raised center section goes into the outlet box.
   • Use long machine screws (DD) through the bracket (B), and attach it to the outlet box with short machine screws (BB).

2. Wiring Connections:

   • Ground Wire: Wrap the ground wire from your outlet box around the ground screw on the mounting bracket (B) and tighten the screw securely.
   • Supply Wires: Connect the white (neutral) supply wire to the white (neutral) fixture wire. Connect the black (hot) supply wire to the black (hot) fixture wire.

3. Fixture Assembly:

   • Thread the rods (F) onto the exposed threaded pipe (G). Repeat for all remaining rods.
   • Place the canopy (A) over the long machine screws (DD) and secure it using lock washers (EE) and threaded knobs (CC).
   • Place the shades (E) over the sockets (D) and secure them with socket rings (C) using the provided wrench (FF).

4. Bulb Installation:

   • Insert three bulbs (60-watt max., medium-base incandescent or LED/CFL equivalent) into the sockets.

5. Final Checks:

   • Note that the fixture can be installed with the sockets facing either up or down, depending on your preference.
   • Avoid over-tightening the socket rings when attaching the shades. This could damage the fixture.

Always consult the Kichler 37531 Zagara 3-Light Vanity's instruction manual for detailed diagrams and safety information. If you experience any issues during installation, contact Kichler customer service for assistance.