Choosing the correct canopy finish for your Progress Lighting P500386-193 One Light Pendant in Brushed Nickel is essential for a polished look. This model offers three canopy finish options: Brushed Nickel (009), Matte Black (31 M), and Vintage Brass (163). Here's how to select your preferred finish and incorporate it into the installation: First, after assembling the round mounting plate with screws and hex nuts, pass the wire through the cord bushing out of the canopy assembly. Next, loosen the strain relief set, adjust the cord length, and tighten the set securely. Then, strip 3/8" of insulation from the electrical wire ends and connect the WHITE fixture wire to the WHITE supply wire, and the BLACK fixture wire to the BLACK supply wire using wire nuts. Connect the fixture ground wire and supply ground wire either with a wire nut or by fastening to the ground. Now, choose your desired canopy finish and pass the wire through the cord bushing out of the canopy assembly. Secure the fixture to the screws using the two cylinder nuts and tighten them. After this, attach the shade by sliding the "U" slot onto the fixture and securing it using the cord bushing. Finally, thread the lamp (not included) into the fixture socket. Use a 100-watt MAX incandescent medium base lamp, SBCFL, or SBLED. Following these steps ensures you can successfully select and install your chosen canopy finish for your Progress Lighting pendant.
